From 717d31ad4e8631c43110d9d202941cd91b19e239 Mon Sep 17 00:00:00 2001 From: "Adam T. Carpenter" Date: Tue, 25 May 2021 20:55:22 -0400 Subject: added some aliases, removed vifm config after uninstall --- .aliases | 84 +- .config/i3/config | 31 +- .config/vifm/colors/Default.vifm | 65 - .config/vifm/colors/Default.vifm.bak | 80 - .config/vifm/scripts/README | 6 - .config/vifm/vifm-help.txt | 5902 ---------------------------------- .config/vifm/vifminfo | 920 ------ .config/vifm/vifmrc | 451 --- .config/wpg/sequences | 2 +- .config/wpg/templates/i3.base | 17 +- 10 files changed, 100 insertions(+), 7458 deletions(-) delete mode 100644 .config/vifm/colors/Default.vifm delete mode 100644 .config/vifm/colors/Default.vifm.bak delete mode 100644 .config/vifm/scripts/README delete mode 100644 .config/vifm/vifm-help.txt delete mode 100644 .config/vifm/vifminfo delete mode 100644 .config/vifm/vifmrc diff --git a/.aliases b/.aliases index bafc8be..d08daf2 100644 --- a/.aliases +++ b/.aliases @@ -1,23 +1,91 @@ +# Aliases + alias cp="cp -i" -alias dd=dd status=progress +alias dd="dd status=progress" alias define="dict -d gcide" alias df="df -h" -alias doom2="crispy-doom -iwad ~/games/doom/DOOM2.WAD" -alias doom="crispy-doom -iwad ~/games/doom/DOOM.WAD" alias du="du -h -c" +alias e="$EDITOR" alias ffmpeg="ffmpeg -hide_banner" alias ffprobe="ffprobe -hide_banner" alias g="git status -s" alias gg="git add -A && git commit ; git push" -alias grep="grep --color=auto" -alias l="ls --color=auto" -alias la="ls -lah --color=auto" +alias grep="grep --color -i" +alias l="ls" +alias less="less --mouse --quit-if-one-screen --ignore-case --LINE-NUMBERS" alias lightgtk="GTK2_RC_FILES= GTK_DATA_PREFIX= GTK_THEME=Adwaita" -alias ll="ls -lh --color=auto" +alias ll="ls -lahGF" alias ln="ln -v" -alias ls="ls --color=auto" +alias lr="ls -R" +alias ls="ls -GF" alias noprompt="PROMPT= RPROMPT= " +alias q="ls|grep" +alias qq="find .|grep" alias sigil="crispy-doom -iwad ~/games/doom/DOOM.WAD -file ~/games/doom/SIGIL_v1_21/SIGIL_COMPAT_v1_21.wad" alias sudo="doas" alias synonym="dict -d moby-thesaurus" alias tar="tar -v" + +# Useful functions + +function o() { + case "$1" in + *.wad|*.WAD) + crispy-doom -iwad "$1" & + ;; + *.pdf|*.epub|*.xhtml|*.xps) + mupdf "$1" + ;; + *.jpg|*.png|*.bmp|*.gif|*.jpeg|*.JPG|*.JPEG|*.webp|*.tiff) + find "$(dirname $1)" -type f -depth 1 -exec sxiv -a "$1" "{}" + 2>/dev/null & + ;; + *.xcf) + gimp "$1" 2>/dev/null & + ;; + *.wav|*.mp3|*.flac|*.m4a|*.wma|*.ape|*.ac3|*.og|*.ogagx|*.spx|*.opus) + mpv --no-video "$1" 2>/dev/null + ;; + *.avi|*.mp4|*.wmv|*.dat|*.3gp|*.ogv|*.mkv|*.mpg|*.mpeg|*.vob|*.m2v|*.mov|*.webm|*.ts|*.mts|*.m4v|*.qt|*.divx) + mpv "$1" 2>/dev/null & + ;; + *.html|*.htm) + $BROWSER "$1" 2>/dev/null & + ;; + *.zip|*.jar|*.war|*.7z|*.7zip|*.tar|*.tar.gz|*.tgz|*.tar.xz|*.xz|*.txz|*.iso) + tar -xvf "$1" + ;; + *.xls|*.xlsx|*.csv) + sc-im "$1" + ;; + *.lcd|*.ldr|*.mpd) + leocad "$1" + ;; + *) + [ -f "$1" ] && less "$1" || echo Unsure what to do... + ;; + esac +} + +theme_add() { + indir="${1:-~/downloads}" + [ -d "$indir" ] || exit + + outdir=~/.local/share/wallpapers + [ -d "$outdir" ] || mkdir -p "$outdir" + + sxiv -rot "$indir" | while read infile; do + outfile="$outdir/$(echo ${infile##*/} | tr -s [:blank:] - | tr [:upper:] [:lower:])" + convert "$infile" -geometry '2560x1440^' -gravity center -crop 2560x1440+0+0 "$outfile" + wpg -a "$outfile" + done +} + +theme_set() { + theme="$(sxiv -rot ~/.config/wpg/wallpapers | head -1)" + [ -f "$theme" ] && wpg -s "$theme" +} + +theme_reset() { + wpg -s "$(wpg -c)" +} + diff --git a/.config/i3/config b/.config/i3/config index d6d9449..5ff0929 100644 --- a/.config/i3/config +++ b/.config/i3/config @@ -3,10 +3,16 @@ ## Please see https://i3wm.org/docs/userguide.html for a complete reference! ## GENERAL +default_border pixel 2 +default_floating_border pixel 2 font pango:sans-serif 13 +force_display_urgency_hint 500 ms +hide_edge_borders smart set $locker xautolock -locknow set $mod Mod1 set $sigaudio pkill -75 i3blocks +title_align center +workspace_auto_back_and_forth yes ## WORKSPACES set $ws1 "1:󰖟" @@ -45,22 +51,15 @@ bindsym $mod+shift+8 move container to workspace $ws8 bindsym $mod+shift+9 move container to workspace $ws9 bindsym $mod+shift+0 move container to workspace $ws10 -## BORDERS -default_border pixel 2 -default_floating_border pixel 2 -hide_edge_borders smart -title_align center -workspace_auto_back_and_forth yes - ## COLORS # base colors -- set by WPG -set $coloract "#5d60a7" -set $colorin "#404273" -set_from_resource $color0 i3wm.color0 "#0c0c0e" -set_from_resource $color15 i3wm.color15 "#fef5ff" -set_from_resource $color8 i3wm.color8 "#222229" -set_from_resource $coloru i3wm.color2 "#738738" -set_from_resource $split i3wm.color10 "#9bbb3c" +set $coloract "#3b659f" +set $colorin "#28456d" +set_from_resource $color0 i3wm.color0 "#0a0b0a" +set_from_resource $color15 i3wm.color15 "#fffefe" +set_from_resource $color8 i3wm.color8 "#212521" +set_from_resource $coloru i3wm.color2 "#778655" +set_from_resource $split i3wm.color10 "#a0bc60" # class border backgr text indicator child_border client.background $color0 @@ -119,8 +118,8 @@ bindsym $mod+space focus mode_toggle bindsym $mod+shift+F1 exec firefox /usr/local/share/doc/freebsd/handbook/book.html bindsym $mod+F2 exec firefox bindsym $mod+shift+F2 exec firefox --private-window -bindsym $mod+F3 exec alacritty -e zsh -i -c "vifm ~ ~/downloads" -bindsym $mod+F4 exec alacritty -t "Reading Email" -e zsh -i -c "mutt" && mbsync -c ~/.config/mbsync/mbsyncrc -a && pkill -77 i3blocks +#bindsym $mod+F3 exec alacritty -e zsh -i -c "vifm ~ ~/downloads" +bindsym $mod+F4 exec alacritty -t "Reading Email" -e sh -i -c 'OLDPWD="$PWD" && cd ~/downloads/ && mutt && cd "$OLDPWD"' && mbsync -c ~/.config/mbsync/mbsyncrc -a && pkill -77 i3blocks bindsym $mod+F5 exec alacritty -t "Reading News" -e zsh -i -c newsboat && pkill -78 i3blocks bindsym $mod+F6 exec --no-startup-id url_handler.sh bindsym $mod+F7 exec --no-startup-id dict.sh diff --git a/.config/vifm/colors/Default.vifm b/.config/vifm/colors/Default.vifm deleted file mode 100644 index fa715ae..0000000 --- a/.config/vifm/colors/Default.vifm +++ /dev/null @@ -1,65 +0,0 @@ -" You can edit this file by hand. -" The " character at the beginning of a line comments out the line. -" Blank lines are ignored. - -" The Default color scheme is used for any directory that does not have -" a specified scheme and for parts of user interface like menus. A -" color scheme set for a base directory will also -" be used for the sub directories. - -" The standard ncurses colors are: -" Default = -1 = None, can be used for transparency or default color -" Black = 0 -" Red = 1 -" Green = 2 -" Yellow = 3 -" Blue = 4 -" Magenta = 5 -" Cyan = 6 -" White = 7 - -" Light versions of colors are also available (set bold attribute): -" LightBlack -" LightRed -" LightGreen -" LightYellow -" LightBlue -" LightMagenta -" LightCyan -" LightWhite - -" Available attributes (some of them can be combined): -" bold -" underline -" reverse or inverse -" standout -" none - -" Vifm supports 256 colors you can use color numbers 0-255 -" (requires properly set up terminal: set your TERM environment variable -" (directly or using resources) to some color terminal name (e.g. -" xterm-256color) from /usr/lib/terminfo/; you can check current number -" of colors in your terminal with tput colors command) - -" highlight group cterm=attrs ctermfg=foreground_color ctermbg=background_color - -highlight clear - -highlight Win cterm=none ctermfg=white ctermbg=black -highlight Directory cterm=bold ctermfg=cyan ctermbg=default -highlight Link cterm=bold ctermfg=yellow ctermbg=default -highlight BrokenLink cterm=bold ctermfg=red ctermbg=default -highlight Socket cterm=bold ctermfg=magenta ctermbg=default -highlight Device cterm=bold ctermfg=red ctermbg=default -highlight Fifo cterm=bold ctermfg=cyan ctermbg=default -highlight Executable cterm=bold ctermfg=green ctermbg=default -highlight Selected cterm=bold ctermfg=magenta ctermbg=default -highlight CurrLine cterm=bold ctermfg=default ctermbg=blue -highlight TopLine cterm=none ctermfg=black ctermbg=white -highlight TopLineSel cterm=bold ctermfg=black ctermbg=default -highlight StatusLine cterm=bold ctermfg=black ctermbg=white -highlight WildMenu cterm=underline,reverse ctermfg=white ctermbg=black -highlight CmdLine cterm=none ctermfg=white ctermbg=black -highlight ErrorMsg cterm=none ctermfg=red ctermbg=black -highlight Border cterm=none ctermfg=black ctermbg=white -highlight JobLine cterm=bold,reverse ctermfg=black ctermbg=white diff --git a/.config/vifm/colors/Default.vifm.bak b/.config/vifm/colors/Default.vifm.bak deleted file mode 100644 index 7434b36..0000000 --- a/.config/vifm/colors/Default.vifm.bak +++ /dev/null @@ -1,80 +0,0 @@ -" You can edit this file by hand. -" The " character at the beginning of a line comments out the line. -" Blank lines are ignored. - -" The Default color scheme is used for any directory that does not have -" a specified scheme and for parts of user interface like menus. A -" color scheme set for a base directory will also -" be used for the sub directories. - -" The standard ncurses colors are: -" Default = -1 = None, can be used for transparency or default color -" Black = 0 -" Red = 1 -" Green = 2 -" Yellow = 3 -" Blue = 4 -" Magenta = 5 -" Cyan = 6 -" White = 7 - -" Light versions of colors are also available (set bold attribute): -" LightBlack -" LightRed -" LightGreen -" LightYellow -" LightBlue -" LightMagenta -" LightCyan -" LightWhite - -" Available attributes (some of them can be combined): -" bold -" underline -" reverse or inverse -" standout -" italic (on unsupported systems becomes reverse) -" none - -" Vifm supports 256 colors you can use color numbers 0-255 -" (requires properly set up terminal: set your TERM environment variable -" (directly or using resources) to some color terminal name (e.g. -" xterm-256color) from /usr/lib/terminfo/; you can check current number -" of colors in your terminal with tput colors command) - -" highlight group cterm=attrs ctermfg=foreground_color ctermbg=background_color - -highlight clear - -highlight Win cterm=none ctermfg=white ctermbg=black -highlight Directory cterm=bold ctermfg=cyan ctermbg=default -highlight Link cterm=bold ctermfg=yellow ctermbg=default -highlight BrokenLink cterm=bold ctermfg=red ctermbg=default -highlight Socket cterm=bold ctermfg=magenta ctermbg=default -highlight Device cterm=bold ctermfg=red ctermbg=default -highlight Fifo cterm=bold ctermfg=cyan ctermbg=default -highlight Executable cterm=bold ctermfg=green ctermbg=default -highlight Selected cterm=bold ctermfg=magenta ctermbg=default -highlight CurrLine cterm=bold,reverse ctermfg=default ctermbg=default -highlight TopLine cterm=none ctermfg=black ctermbg=white -highlight TopLineSel cterm=bold ctermfg=black ctermbg=default -highlight StatusLine cterm=bold ctermfg=black ctermbg=white -highlight WildMenu cterm=underline,reverse ctermfg=white ctermbg=black -highlight CmdLine cterm=none ctermfg=white ctermbg=black -highlight ErrorMsg cterm=none ctermfg=red ctermbg=black -highlight Border cterm=none ctermfg=black ctermbg=white -highlight JobLine cterm=bold,reverse ctermfg=black ctermbg=white -highlight SuggestBox cterm=bold ctermfg=default ctermbg=default -highlight CmpMismatch cterm=bold ctermfg=white ctermbg=red -highlight AuxWin cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight TabLine cterm=none ctermfg=white ctermbg=black -highlight TabLineSel cterm=bold,reverse ctermfg=default ctermbg=default -highlight User1 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User2 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User3 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User4 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User5 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User6 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User7 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User8 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default -highlight User9 cterm=bold,underline,reverse,standout,italic ctermfg=default ctermbg=default diff --git a/.config/vifm/scripts/README b/.config/vifm/scripts/README deleted file mode 100644 index 7694952..0000000 --- a/.config/vifm/scripts/README +++ /dev/null @@ -1,6 +0,0 @@ -This directory is dedicated for user-supplied scripts/executables. -vifm modifies its PATH environment variable to let user run those -scripts without specifying full path. All subdirectories are added -as well. File in a subdirectory overrules file with the same name -in parent directories. Restart might be needed to recognize files -in newly created or renamed subdirectories. \ No newline at end of file diff --git a/.config/vifm/vifm-help.txt b/.config/vifm/vifm-help.txt deleted file mode 100644 index 1343fe6..0000000 --- a/.config/vifm/vifm-help.txt +++ /dev/null @@ -1,5902 +0,0 @@ -VIFM(1) FreeBSD General Commands Manual VIFM(1) - - - -NAME - vifm - vi file manager - -SYNOPSIS - vifm [OPTION]... - vifm [OPTION]... path - vifm [OPTION]... path path - -DESCRIPTION - Vifm is an ncurses based file manager with vi like keybindings. If you - use vi, vifm gives you complete keyboard control over your files - without having to learn a new set of commands. - -OPTIONS - vifm starts in the current directory unless it is given a different - directory on the command line or 'vifminfo' option includes "savedirs" - (in which case last visited directories are used as defaults). - - - Read list of files from standard input stream and compose custom - view out of them (see "Custom views" section). Current working - directory is used as a base for relative paths. - - Starts Vifm in the specified path. - - - Starts Vifm in the specified paths. - - Specifying two directories triggers split view even when vifm was in - single-view mode on finishing previous session. To suppress this - behaviour :only command can be put in the vifmrc file. - - When only one path argument is found on command-line, the left/top pane - is automatically set as the current view. - - Paths to files are also allowed in case you want vifm to start with - some archive opened. - - --select - Open parent directory of the given path and select specified - file in it. - - -f Makes vifm instead of opening files write selection to - $VIFM/vimfiles and quit. - - --choose-files |- - Sets output file to write selection into on exit instead of - opening files. "-" means standard output. Use empty value to - disable it. - - --choose-dir |- - Sets output file to write last visited directory into on exit. - "-" means standard output. Use empty value to disable it. - - --delimiter - Sets separator for list of file paths written out by vifm. - Empty value means null character. Default is new line - character. - - --on-choose - Sets command to be executed on selected files instead of opening - them. The command may use any of macros described in "Command - macros" section below. The command is executed once for whole - selection. - - --logging[=] - Log some operational details $VIFM/log. If the optional startup - log path is specified and permissions allow to open it for - writing, then logging of early initialization (before value of - $VIFM is determined) is put there. - - --server-list - List available server names and exit. - - --server-name - Name of target or this instance (sequential numbers are appended - on name conflict). - - --remote - Sends the rest of the command line to another instance of vifm, - --server-name is treated just like any other argument and should - precede --remote on the command line. When there is no server, - quits silently. There is no limit on how many arguments can be - processed. One can combine --remote with -c or - + to execute commands in already running instance of - vifm. See also "Client-Server" section below. - - --remote-expr - passes expression to vifm server and prints result. See also - "Client-Server" section below. - - -c or + - Run command-line mode on startup. Commands in such - arguments are executed in the order they appear in command line. - Commands with spaces or special symbols must be enclosed in - double or single quotes or all special symbols should be escaped - (the exact syntax strongly depends on shell). "+" argument is - equivalent to "$" and thus picks last item of of the view. - - --help, -h - Show a brief command summary and exit vifm. - - --version, -v - Show version information and quit. - - --no-configs - Skip reading vifmrc and vifminfo. - - - See "Startup" section below for the explanations on $VIFM. - -General keys - Ctrl-C or Escape - cancel most operations (see "Cancellation" section below), clear - all selected files. - - Ctrl-L clear and redraw the screen. - -Basic Movement - The basic vi key bindings are used to move through the files and pop-up - windows. - - k, gk, or Ctrl-P - move cursor up one line. - - j, gj or Ctrl-N - move cursor down one line. - - h when 'lsview' is off move up one directory (moves to parent - directory node in tree view), otherwise move left one file. - - l when 'lsview' is off move into a directory or launches a file, - otherwise move right one file. - - gg move to the first line of the file list. - - G move to the last line in the file list. - - gh go up one directory regardless of view representation (regular, - ls-like). Also can be used to leave custom views including tree - view. - - gl or Enter - enter directory or launch a file. - - H move to the first file in the window. - - M move to the file in the middle of the window. - - L move to the last file in the window. - - Ctrl-F or Page Down - move forward one page. - - Ctrl-B or Page Up - move back one page. - - Ctrl-D jump back one half page. - - Ctrl-U jump forward one half page. - - n% move to the file that is n percent from the top of the list (for - example 25%). - - 0 or ^ move cursor to the first column. See 'lsview' option - description. - - $ move cursor to the last column. See 'lsview' option - description. - - Space switch file lists. - - gt switch to the next tab (wrapping around). - - {n}gt switch to the tab number {n} (wrapping around). - - gT switch to the previous tab (wrapping around). - - {n}gT switch to {n}-th previous tab. - -Movement with Count - Most movement commands also accept a count, 12j would move down 12 - files. - - [count]% - move to percent of the file list. - - [count]j - move down [count] files. - - [count]k - move up [count] files. - - [count]G or [count]gg - move to list position [count]. - - [count]h - go up [count] directories. - -Scrolling panes - zt redraw pane with file in top of list. - - zz redraw pane with file in center of list. - - zb redraw pane with file in bottom of list. - - Ctrl-E scroll pane one line down. - - Ctrl-Y scroll pane one line up. - -Pane manipulation - Second character can be entered with or without Control key. - - Ctrl-W H - move the pane to the far left. - - Ctrl-W J - move the pane to the very bottom. - - Ctrl-W K - move the pane to the very top. - - Ctrl-W L - move the pane to the far right. - - - Ctrl-W h - switch to the left pane. - - Ctrl-W j - switch to the pane below. - - Ctrl-W k - switch to the pane above. - - Ctrl-W l - switch to the right pane. - - - Ctrl-W b - switch to bottom-right window. - - Ctrl-W t - switch to top-left window. - - - Ctrl-W p - switch to previous window. - - Ctrl-W w - switch to other pane. - - - Ctrl-W o - leave only one pane. - - Ctrl-W s - split window horizontally. - - Ctrl-W v - split window vertically. - - - Ctrl-W x - exchange panes. - - Ctrl-W z - quit preview pane or view modes. - - - Ctrl-W - - decrease size of the view by count. - - Ctrl-W + - increase size of the view by count. - - Ctrl-W < - decrease size of the view by count. - - Ctrl-W > - increase size of the view by count. - - - Ctrl-W | - set current view size to count. - - Ctrl-W _ - set current view size to count. - - Ctrl-W = - make size of two views equal. - - For Ctrl-W +, Ctrl-W -, Ctrl-W <, Ctrl-W >, Ctrl-W | and Ctrl-W _ - commands count can be given before and/or after Ctrl-W. The resulting - count is a multiplication of those two. So "2 Ctrl-W 2 -" decreases - window size by 4 lines or columns. - - Ctrl-W | and Ctrl-W _ maximise current view by default. - -Marks - Marks are set the same way as they are in vi. - - You can use these characters for marks [a-z][A-Z][0-9]. - - m[a-z][A-Z][0-9] - set a mark for the file at the current cursor position. - - '[a-z][A-Z][0-9] - navigate to the file set for the mark. - - - There are also several special marks that can't be set manually: - - - ' (single quote) - previously visited directory of the view, thus - hitting '' allows switching between two last locations - - - < - the first file of the last visually selected block - - - > - the last file of the last visually selected block - -Searching - /regular expression pattern - search for files matching regular expression in forward - direction and advance cursor to next match. - - / perform forward search with top item of search pattern history. - - ?regular expression pattern - search for files matching regular expression in backward - direction and advance cursor to previous match. - - ? perform backward search with top item of search pattern history. - - Trailing slash for directories is taken into account, so /\/ searches - for directories and symbolic links to directories. At the moment // - works too, but this can change in the future, so consider escaping the - slash if not typing pattern by hand. - - Matches are automatically selected if 'hlsearch' is set. Enabling - 'incsearch' makes search interactive. 'ignorecase' and 'smartcase' - options affect case sensitivity of search queries. - - - [count]n - go to the next file matching last search pattern. Takes last - search direction into account. - - [count]N - go to the previous file matching last search pattern. Takes - last search direction into account. - - If 'hlsearch' option is set, hitting n/N to perform search and go to - the first matching item resets current selection in normal mode. It is - not the case if search was already performed on files in the directory, - thus selection is not reset after clearing selection with escape key - and hitting n/N key again. - - Note: vifm uses extended regular expressions for / and ?. - - - [count]f[character] - search forward for file with [character] as first character in - name. Search wraps around the end of the list. - - [count]F[character] - search backward for file with [character] as first character in - name. Search wraps around the end of the list. - - [count]; - find the next match of f or F. - - [count], - find the previous match of f or F. - - Note: f, F, ; and , wrap around list beginning and end when they are - used alone and they don't wrap when they are used as selectors. - -File Filters - There are three basic file filters: - - - dot files filter (excluding "." and ".." special directories, whose - appearance is controlled by the 'dotdirs' option); - - - manual filter for file names; - - - automatic filter for file names; - - - local filter for file names (see description of the "=" normal mode - command). - - Performing operations on manual filter for file names automatically - does the same on automatic one. The file name filter is separated - mainly for convenience purpose and to get more deterministic behaviour. - - The basic vim folding key bindings are used for filtering files. - - Each file list has its own copy of each filter. - - Filtered files are not checked in / search or :commands. - - Files and directories are filtered separately. For this a slash is - appended to a directory name before testing whether it matches the - filter. Examples: - - - " filter directories which names end with '.files' - :filter /^.*\.files\/$/ - - " filter files which names end with '.d' - :filter /^.*\.d$/ - - " filter files and directories which names end with '.o' - :filter /^.*\.o\/?$/ - - Note: vifm uses extended regular expressions. - - za toggle visibility of dot files. - - zo show dot files. - - zm hide dot files. - - zf add selected files to file name filter. - - zO show files hidden by file name filter. - - zM restore all filters. - - zR remove all filters. - - zr remove local filter. - - zd exclude selection or current file from a custom view. Does - nothing for regular view. For tree view excluding directory - excludes that sub-tree. For compare views zd hides group of - adjacent identical files, count can be specified as 1 to exclude - just single file or selected items instead. Files excluded this - way are not counted as filtered out and can't be returned unless - view is reloaded. - - =regular expression pattern - filter out files that don't match regular expression. Whether - view is updated as regular expression is changed depends on the - value of the 'incsearch' option. This kind of filter is - automatically reset when directory is changed. - -Other Normal Mode Keys - [count]: - enter command line mode. [count] generates range. - - q: open external editor to prompt for command-line command. See - "Command line editing" section for details. - - q/ open external editor to prompt for search pattern to be searched - in forward direction. See "Command line editing" section for - details. - - q? open external editor to prompt for search pattern to be searched - in backward direction. See "Command line editing" section for - details. - - q= open external editor to prompt for filter pattern. See "Command - line editing" section for details. Unlike other q{x} commands - this one doesn't work in Visual mode. - - [count]!! and [count]! - enter command line mode with entered ! command. [count] - modifies range. - - Ctrl-O go backwards through directory history of current view. - Nonexistent directories are automatically skipped. - - Ctrl-I if 'cpoptions' contains "t" flag, and switch active - pane just like does, otherwise it goes forward through - directory history of current view. Nonexistent directories are - automatically skipped. - - Ctrl-G create a window showing detailed information about the current - file. - - Shift-Tab - enters view mode (works only after activating view pane with - :view command). - - ga calculate directory size. Uses cached directory sizes when - possible for better performance. As a special case calculating - size of ".." entry results in calculation of size of current - directory. - - gA like ga, but force update. Ignores old values of directory - sizes. - - If file under cursor is selected, each selected item is processed, - otherwise only current file is updated. - - gf find link destination (like l with 'followlinks' off, but also - finds directories). - - gr only for MS-Windows - same as l key, but tries to run program with administrative - privileges. - - av go to visual mode into selection amending state preserving - current selection. - - gv go to visual mode restoring last selection. - - [reg]gs - when no register is specified, restore last t selection (similar - to what gv does for visual mode selection). If register is - present, then all files listed in that register and which are - visible in current view are selected. - - gu - make names of selected files lowercase. - - [count]guu and [count]gugu - make names of [count] files starting from the current one - lowercase. Without [count] only current file is affected. - - gU - make names of selected files uppercase. - - [count]gUU and [count]gUgU - make names of [count] files starting from the current one - uppercase. Without [count] only current file is affected. - - e explore file in the current pane. - - i handle file (even if it's an executable and 'runexec' option is - set). - - cw change word is used to rename a file or files. - - cW change WORD is used to change only name of file (without - extension). - - cl change link target. - - co only for *nix - change file owner. - - cg only for *nix - change file group. - - [count]cp - change file attributes (permission on *nix and properties on - Windows). If [count] is specified, it's treated as numerical - argument for non-recursive `chmod` command (of the form - [0-7]{3,4}). - - [count]C - clone file [count] times. - - [count]dd or d[count]selector - move selected file or files to trash directory (if 'trash' - option is set, otherwise delete). See "Trash directory" section - below. - - [count]DD or D[count]selector - like dd and d, but omitting trash directory (even when - 'trash' option is set). - - Y, [count]yy or y[count]selector - yank selected files. - - p copy yanked files to the current directory or move the files to - the current directory if they were deleted with dd or :d[elete] - or if the files were yanked from trash directory. See "Trash - directory" section below. - - P move the last yanked files. The advantage of using P instead of - d followed by p is that P moves files only once. This isn't - important in case you're moving files in the same file system - where your home directory is, but using P to move files on some - other file system (or file systems, in case you want to move - files from fs1 to fs2 and your home is on fs3) can save your - time. - - al put symbolic links with absolute paths. - - rl put symbolic links with relative paths. - - t select or unselect (tag) the current file. - - u undo last change. - - Ctrl-R redo last change. - - dp in compare view of "ofboth grouppaths" kind, makes corresponding - entry of the other pane equal to the current one. The semantics - is as follows: - - nothing done for identical entries - - if file is missing in current view, its pair gets removed - - if file is missing or differs in other view, it's replaced - - file pairs are defined by matching relative paths - File removal obeys 'trash' option. When the option is enabled, - the operation can be undone/redone (although results won't be - visible automatically). - Unlike in Vim, this operation is performed on a single line - rather than a set of adjacent changes. - - do same as dp, but applies changes in the opposite direction. - - v or V enter visual mode, clears current selection. - - [count]Ctrl-A - increment first number in file name by [count] (1 by default). - - [count]Ctrl-X - decrement first number in file name by [count] (1 by default). - - ZQ same as :quit!. - - ZZ same as :quit. - - . repeat last command-line command (not normal mode command) of - this session (does nothing right after startup or :restart - command). The command doesn't depend on command-line history - and can be used with completely disabled history. - - ( go to previous group. Groups are defined by primary sorting - key. For name and iname members of each group have same first - letter, for all other sorting keys vifm uses size, uid, ... - - ) go to next group. See ( key description above. - - { speeds up navigation to closest previous entry of the opposite - type by moving to the first file backwards when cursor is on a - directory and to the first directory backwards when cursor is on - a file. This is essentially a special case of ( that is locked - on "dirs". - - } same as {, but in forward direction. - - [c go to previous mismatched entry in directory comparison view or - do nothing. - - ]c go to next mismatched entry in directory comparison view or do - nothing. - - [d go to previous directory entry or do nothing. - - ]d go to next directory entry or do nothing. - - [r same as :siblprev. - - ]r same as :siblnext. - - [R same as :siblprev!. - - ]R same as :siblnext!. - - [s go to previous selected entry or do nothing. - - ]s go to next selected entry or do nothing. - - [z go to first sibling of current entry. - - ]z go to last sibling of current entry. - - zj go to next directory sibling of current entry or do nothing. - - zk go to previous directory sibling of current entry or do nothing. - -Using Count - You can use count with commands like yy. - - [count]yy - yank count files starting from current cursor position downward. - - Or you can use count with motions passed to y, d or D. - - d[count]j - delete (count + 1) files starting from current cursor position - upward. - -Registers - vifm supports multiple registers for temporary storing list of yanked - or deleted files. - - Registers should be specified by hitting double quote key followed by a - register name. Count is specified after register name. By default - commands use unnamed register, which has double quote as its name. - - Though all commands accept registers, most of commands ignores them - (for example H or Ctrl-U). Other commands can fill register or append - new files to it. - - Presently vifm supports ", _, a-z and A-Z characters as register names. - - As mentioned above " is unnamed register and has special meaning of the - default register. Every time when you use named registers (a-z and A- - Z) unnamed register is updated to contain same list of files as the - last used register. - - _ is black hole register. It can be used for writing, but its list is - always empty. - - Registers with names from a to z and from A to Z are named ones. - Lowercase registers are cleared before adding new files, while - uppercase aren't and should be used to append new files to the existing - file list of appropriate lowercase register (A for a, B for b, ...). - - Registers can be changed on :empty command if they contain files under - trash directory (see "Trash directory" section below). - - Registers do not contain one file more than once. - - Example: - - "a2yy - - puts names of two files to register a (and to the unnamed register), - - "Ad - - removes one file and append its name to register a (and to the unnamed - register), - - p or "ap or "Ap - - inserts previously yanked and deleted files into current directory. - -Selectors - y, d, D, !, gu and gU commands accept selectors. You can combine them - with any of selectors below to quickly remove or yank several files. - - Most of selectors are like vi motions: j, k, gg, G, H, L, M, %, f, F, - ;, comma, ', ^, 0 and $. But there are some additional ones. - - a all files in current view. - - s selected files. - - S all files except selected. - - Examples: - - - dj - delete file under cursor and one below; - - - d2j - delete file under cursor and two below; - - - y6gg - yank all files from cursor position to 6th file in the list. - - When you pass a count to whole command and its selector they are - multiplied. So: - - - 2d2j - delete file under cursor and four below; - - - 2dj - delete file under cursor and two below; - - - 2y6gg - yank all files from cursor position to 12th file in the - list. - -Visual Mode - Visual mode has to generic operating submodes: - - - plain selection as it is in Vim; - - - selection editing submode. - - Both modes select files in range from cursor position at which visual - mode was entered to current cursor position (let's call it "selection - region"). Each of two borders can be adjusted by swapping them via "o" - or "O" keys and updating cursor position with regular cursor motion - keys. Obviously, once initial cursor position is altered this way, - real start position becomes unavailable. - - Plain Vim-like visual mode starts with cleared selection, which is not - restored on rejecting selection ("Escape", "Ctrl-C", "v", "V"). - Contrary to it, selection editing doesn't clear previously selected - files and restores them after reject. Accepting selection by - performing an operation on selected items (e.g. yanking them via "y") - moves cursor to the top of current selection region (not to the top - most selected file of the view). - - In turn, selection editing supports three types of editing (look at - statusbar to know which one is currently active): - - - append - amend selection by selecting elements in selection region; - - - remove - amend selection by deselecting elements in selection - region; - - - invert - amend selection by inverting selection of elements in - selection region. - - No matter how you activate selection editing it starts in "append". - One can switch type of operation (in the order given above) via "Ctrl- - G" key. - - Almost all normal mode keys work in visual mode, but instead of - accepting selectors they operate on selected items. - - Enter save selection and go back to normal mode not moving cursor. - - av leave visual mode if in amending mode (restores previous - selection), otherwise switch to amending selection mode. - - gv restore previous visual selection. - - v, V, Ctrl-C or Escape - leave visual mode if not in amending mode, otherwise switch to - normal visual selection. - - Ctrl-G switch type of amending by round robin scheme: append -> remove - -> invert. - - : enter command line mode. Selection is cleared on leaving the - mode. - - o switch active selection bound. - - O switch active selection bound. - - gu, u make names of selected files lowercase. - - gU, U make names of selected files uppercase. - -View Mode - This mode tries to imitate the less program. List of builtin shortcuts - can be found below. Shortcuts can be customized using :qmap, :qnoremap - and :qunmap command-line commands. - - Shift-Tab, Tab, q, Q, ZZ - return to normal mode. - - [count]e, [count]Ctrl-E, [count]j, [count]Ctrl-N, [count]Enter - scroll forward one line (or [count] lines). - - [count]y, [count]Ctrl-Y, [count]k, [count]Ctrl-K, [count]Ctrl-P - scroll backward one line (or [count] lines). - - [count]f, [count]Ctrl-F, [count]Ctrl-V, [count]Space - scroll forward one window (or [count] lines). - - [count]b, [count]Ctrl-B, [count]Alt-V - scroll backward one window (or [count] lines). - - [count]z - scroll forward one window (and set window to [count]). - - [count]w - scroll backward one window (and set window to [count]). - - [count]Alt-Space - scroll forward one window, but don't stop at end-of-file. - - [count]d, [count]Ctrl-D - scroll forward one half-window (and set half-window to [count]). - - [count]u, [count]Ctrl-U - scroll backward one half-window (and set half-window to - [count]). - - r, Ctrl-R, Ctrl-L - repaint screen. - - R reload view preserving scroll position. - - F toggle automatic forwarding. Roughly equivalent to periodic - file reload and scrolling to the bottom. The behaviour is - similar to `tail -F` or F key in less. - - [count]/pattern - search forward for ([count]-th) matching line. - - [count]?pattern - search backward for ([count]-th) matching line. - - [count]n - repeat previous search (for [count]-th occurrence). - - [count]N - repeat previous search in reverse direction (for [count]-th - occurrence). - - [count]g, [count]<, [count]Alt-< - scroll to the first line of the file (or line [count]). - - [count]G, [count]>, [count]Alt-> - scroll to the last line of the file (or line [count]). - - [count]p, [count]% - scroll to the beginning of the file (or N percent into file). - - v invoke an editor to edit the current file being viewed. The - command for editing is taken from the 'vicmd'/'vixcmd' option - value and extended with middle line number prepended by a plus - sign and name of the current file. - - All "Ctrl-W x" keys work the same was as in Normal mode. Active mode - is automatically changed on navigating among windows. When less-like - mode activated on file preview is left using one by "Ctrl-W x" keys, - its state is stored until another file is displayed using preview (it's - possible to leave the mode, hide preview pane, do something else, then - get back to the file and show preview pane again with previously stored - state in it). - -Command line Mode - These keys are available in all submodes of the command line mode: - command, search, prompt and filtering. - - Down, Up, Left, Right, Home, End and Delete are extended keys and they - are not available if vifm is compiled with --disable-extended-keys - option. - - Esc, Ctrl-C - leave command line mode, cancels input. Cancelled input is - saved into appropriate history and can be recalled later. - - Ctrl-M, Enter - execute command and leave command line mode. - - Ctrl-I, Tab - complete command or its argument. - - Shift-Tab - complete in reverse order. - - Ctrl-_ stop completion and return original input. - - Ctrl-B, Left - move cursor to the left. - - Ctrl-F, Right - move cursor to the right. - - Ctrl-A, Home - go to line beginning. - - Ctrl-E, End - go to line end. - - Alt-B go to the beginning of previous word. - - Alt-F go to the end of next word. - - Ctrl-U remove characters from cursor position till the beginning of - line. - - Ctrl-K remove characters from cursor position till the end of line. - - Ctrl-H, Backspace - remove character before the cursor. - - Ctrl-D, Delete - remove character under the cursor. - - Ctrl-W remove characters from cursor position till the beginning of - previous word. - - Alt-D remove characters from cursor position till the beginning of - next word. - - Ctrl-T swap the order of current and previous character and move cursor - forward or, if cursor past the end of line, swap the order of - two last characters in the line. - - Alt-. insert last part of previous command to current cursor position. - Each next call will insert last part of older command. - - Ctrl-G edit command-line content in external editor. See "Command line - editing" section for details. - - Ctrl-N recall more recent command-line from history. - - Ctrl-P recall older command-line from history. - - Up recall more recent command-line from history, that begins as the - current command-line. - - Down recall older command-line from history, that begins as the - current command-line. - - Ctrl-] trigger abbreviation expansion. - -Pasting special values - The shortcuts listed below insert specified values into current cursor - position. Last key of every shortcut references value that it inserts: - - c - [c]urrent file - - d - [d]irectory path - - e - [e]xtension of a file name - - r - [r]oot part of a file name - - t - [t]ail part of directory path - - - a - [a]utomatic filter - - m - [m]anual filter - - = - local filter, which is bound to "=" in normal mode - - Values related to filelist in current pane are available through Ctrl-X - prefix, while values from the other pane have doubled Ctrl-X key as - their prefix (doubled Ctrl-X is presumably easier to type than - uppercase letters; it's still easy to remap the keys to correspond to - names of similar macros). - - Ctrl-X c - name of the current file of the active pane. - - Ctrl-X d - path to the current directory of the active pane. - - Ctrl-X e - extension of the current file of the active pane. - - Ctrl-X r - name root of current file of the active pane. - - Ctrl-X t - the last component of path to the current directory of the - active pane. - - Ctrl-X Ctrl-X c - name of the current file of the inactive pane. - - Ctrl-X Ctrl-X d - path to the current directory of the inactive pane. - - Ctrl-X Ctrl-X e - extension of the current file of the inactive pane. - - Ctrl-X Ctrl-X r - name root of current file of the inactive pane. - - Ctrl-X Ctrl-X t - the last component of path to the current directory of the - inactive pane. - - - Ctrl-X a - value of automatic filter of the active pane. - - Ctrl-X m - value of manual filter of the active pane. - - Ctrl-X = - value of local filter of the active pane. - - - Ctrl-X / - last pattern from search history. - -Command line editing - vifm provides a facility to edit several kinds of data, that is usually - edited in command-line mode, in external editor (using command - specified by 'vicmd' or 'vixcmd' option). This has at least two - advantages over built-in command-line mode: - - one can use full power of Vim to edit text; - - finding and reusing history entries becomes possible. - - The facility is supported by four input submodes of the command-line: - - command; - - forward search; - - backward search; - - file rename (see description of cw and cW normal mode keys). - - Editing command-line using external editor is activated by the Ctrl-G - shortcut. It's also possible to do almost the same from Normal and - Visual modes using q:, q/ and q? commands. - - Temporary file created for the purpose of editing the line has the - following structure: - - 1. First line, which is either empty or contains text already entered - in command-line. - - 2. 2nd and all other lines with history items starting with the most - recent one. Altering this lines in any way won't change history - items stored by vifm. - - After editing application is finished the first line of the file is - taken as the result of operation, when the application returns zero - exit code. If the application returns an error (see :cquit command in - Vim), all the edits made to the file are ignored, but the initial value - of the first line is saved in appropriate history. - -More Mode - This is the mode that appears when status bar content is so big that it - doesn't fit on the screen. One can identify the mode by "-- More --" - message at the bottom. - - The following keys are handled in this mode: - - - Enter, Ctrl-J, j or Down - scroll one line down. - - Backspace, k or Up - scroll one line up. - - - d scroll one page (half of a screen) down. - - u scroll one page (half of a screen) up. - - - Space, f or PageDown - scroll down a screen. - - b or PageUp - scroll up a screen. - - - G scroll to the bottom. - - g scroll to the top. - - - q, Escape or Ctrl-C - quit the mode. - - : switch to command-line mode. - -Commands - Commands are executed with :command_name - - Commented out lines should start with the double quote symbol ("), - which may be preceded by whitespace characters intermixed with colons. - Inline comments can be added at the end of the line after double quote - symbol, only last line of a multi-line command can contain such - comment. Not all commands support inline comments as their syntax - conflicts with names of registers and fields where double quotes are - allowed. - - Most of the commands have two forms: complete and the short one. - Example: - - :noh[lsearch] - - This means the complete command is nohlsearch, and the short one is - noh. - - Most of command-line commands completely reset selection in the current - view. However, there are several exceptions: - - - `:invert s` most likely leaves some files selected; - - - :normal command (when it doesn't leave command-line mode); - - - :if and :else commands don't affect selection on successful - execution. - - '|' can be used to separate commands, so you can give multiple commands - in one line. If you want to use '|' in an argument, precede it with - '\'. - - These commands see '|' as part of their arguments even when it's - escaped: - - :[range]! - :autocmd - :cabbrev - :cmap - :cnoreabbrev - :cnoremap - :command - :dmap - :dnoremap - :filetype - :fileviewer - :filextype - :map - :mmap - :mnoremap - :nmap - :nnoremap - :noremap - :normal - :qmap - :qnoremap - :vmap - :vnoremap - :wincmd - :windo - :winrun - - To be able to use another command after one of these, wrap it with the - :execute command. An example: - - if filetype('.') == 'reg' | execute '!!echo regular file' | endif - - :[count] - - :number - move to the file number. - :12 would move to the 12th file in the list. - :0 move to the top of the list. - :$ move to the bottom of the list. - - :[count]command - The only builtin :[count]command are :[count]d[elete] and - :[count]y[ank]. - - :d3 would delete three files starting at the current file position - moving down. - - :3d would delete one file at the third line in the list. - - :command [args] - - :[range]!program - execute command via shell. Accepts macros. - - :[range]!command & - - same as above, but the command is run in the background using vifm's - means. - - Programs that write to stdout like "ls" create an error message showing - partial output of the command. - - Note the space before ampersand symbol, if you omit it, command will be - run in the background using job control of your shell. - - Accepts macros. - - :!! - - :[range]!!command - same as :!, but pauses before returning. - - :!! repeat the last command. - - :alink - - :[range]alink[!?] - create absolute symbolic links to files in directory of inactive - view. With "?" prompts for destination file names in an editor. - "!" forces overwrite. - - :[range]alink[!] path - create absolute symbolic links to files in directory specified - by the path (absolute or relative to directory of inactive - view). - - :[range]alink[!] name1 name2... - create absolute symbolic links of files in directory of other - view giving each next link a corresponding name from the - argument list. - - :apropos - - :apropos keyword... - create a menu of items returned by the apropos command. - Selecting an item in the menu opens corresponding man page. By - default the command relies on the external "apropos" utility, - which can be customized by altering value of the 'aproposprg' - option. - - :autocmd - - :au[tocmd] {event} {pat} {cmd} - register autocommand for the {event}, which can be: - - DirEnter - performed on entering a directory - Event name is case insensitive. - - {pat} is a comma-separated list of modified globs patterns, - which can contain tilde or environment variables. All paths use - slash ('/') as directory separator. The pattern can start with - a '!', which negates it. Patterns that do not contain slashes - are matched against the last item of the path only (e.g. "dir" - in "/path/dir"). Literal comma can be entered by doubling it. - Two modifications to globs matching are as follows: - - * - never matches a slash (i.e., can signify single - directory level) - - ** - matches any character (i.e., can match path of - arbitrary depth) - - {cmd} is a :command or several of them separated with '|'. - - Examples of patterns: - - conf.d - matches conf.d directory anywhere - - *.d - matches directories ending with ".d" anywhere - - **.git - matches something.git, but not .git anywhere - - **/.git/** - matches /path/.git/objects, but not /path/.git - - **/.git/**/ - matches /path/.git/ only (because of trailing - slash) - - /etc/* - matches /etc/conf.d/, /etc/X11, but not - /etc/X11/fs - - /etc/**/*.d - matches /etc/conf.d, /etc/X11/conf.d, etc. - - /etc/**/* - matches /etc/ itself and any file below it - - /etc/**/** - matches /etc/ itself and any file below it - - :au[tocmd] [{event}] [{pat}] - list those autocommands that match given event-pattern - combination. - {event} and {pat} can be omitted to list all autocommands. To - list any autocommands for specific pattern one can use * - placeholder in place of {event}. - - :au[tocmd]! [{event}] [{pat}] - remove autocommands that match given event-pattern combination. - Syntax is the same as for listing above. - - :apropos - repeat last :apropos command. - - :bmark - - :bmark tag1 [tag2 [tag3...]] - bookmark current directory with specified tags. - - :bmark! path tag1 [tag2 [tag3...]] - same as :bmark, but allows bookmarking specific path instead of - current directory. This is for use in vifmrc and for - bookmarking files. - - Path can contain macros that expand to single path (%c, %C, %d, - %D) or those that can expand to multiple paths, but contain only - one (%f, %F, %rx). The latter is done for convenience on using - the command interactively. Complex macros that include spaces - (e.g. "%c:gs/ /_") should be escaped. - - :bmarks - - :bmarks - display all bookmarks in a menu. - - :bmarks [tag1 [tag2...]] - display menu of bookmarks that include all of the specified - tags. - - :bmgo - - :bmgo [tag1 [tag2...]] - when there are more than one match acts exactly like :bmarks, - otherwise navigates to single match immediately (and fails if - there is no match). - - :cabbrev - - :ca[bbrev] - display menu of command-line mode abbreviations. - - :ca[bbrev] lhs-prefix - display command-line mode abbreviations which left-hand side - starts with specified prefix. - - :ca[bbrev] lhs rhs - register new or overwrites existing abbreviation for command- - line mode. rhs can contain spaces and any special sequences - accepted in rhs of mappings (see "Mappings" section below). - Abbreviations are expanded non-recursively. - - :cnoreabbrev - - :cnorea[bbrev] - display menu of command-line mode abbreviations. - - :cnorea[bbrev] lhs-prefix - display command-line mode abbreviations which left-hand side - starts with specified prefix. - - :cnorea[bbrev] lhs rhs - same as :cabbrev, but mappings in rhs are ignored during - expansion. - - :cd - - :cd or :cd ~ or :cd $HOME - change to home directory. - - :cd - go to the last visited directory. - - :cd ~/dir - change directory to ~/dir. - - :cd /curr/dir /other/dir - change directory of the current pane to /curr/dir and directory - of the other pane to /other/dir. Relative paths are assumed to - be relative to directory of current view. Command won't fail if - one of directories is invalid. All forms of the command accept - macros. - - :cd! /dir - same as :cd /dir /dir. - - :change - - :c[hange] - create a menu window to alter a files properties. - - :chmod - - :[range]chmod - display file attributes (permission on *nix and properties on - Windows) change dialog. - - :[range]chmod[!] arg... - only for *nix - change permissions for files. See `man 1 chmod` for arg format. - "!" means set permissions recursively. - - :chown - - :[range]chown - only for *nix - same as co key in normal mode. - - :[range]chown [user][:][group] - only for *nix - change owner and/or group of files. Operates on directories - recursively. - - :clone - - :[range]clone[!?] - clones files in current directory. With "?" vifm will open vi - to edit file names. "!" forces overwrite. Macros are expanded. - - :[range]clone[!] path - clones files to directory specified with the path (absolute or - relative to current directory). "!" forces overwrite. Macros - are expanded. - - :[range]clone[!] name1 name2... - clones files in current directory giving each next clone a - corresponding name from the argument list. "!" forces - overwrite. Macros are expanded. - - :colorscheme - - :colo[rscheme]? - print current color scheme name on the status bar. - - :colo[rscheme] - display a menu with a list of available color schemes. You can - choose primary color scheme here. It is used for view if no - directory specific colorscheme fits current path. It's also - used to set border color (except view titles) and colors in - menus and dialogs. - - :colo[rscheme] color_scheme_name - change primary color scheme to color_scheme_name. In case of - errors (e.g. some colors are not supported by terminal) either - nothing is changed or color scheme is reset to builtin colors to - ensure that TUI is left in a usable state. - - :colo[rscheme] color_scheme_name directory - associate directory with the color scheme. The directory - argument can be either absolute or relative path when - :colorscheme command is executed from command line, but - mandatory should be an absolute path when the command is - executed in scripts loaded at startup (until vifm is completely - loaded). - - :comclear - - :comc[lear] - remove all user defined commands. - - :command - - :com[mand] - display a menu of user commands. - - :com[mand] beginning - display user defined commands that start with the beginning. - - :com[mand] name action - set a new user command. - Trying to use a reserved command name will result in an error - message. - Use :com[mand]! to overwrite a previously set command. - Unlike vim user commands do not have to start with a capital - letter. User commands are run in a shell by default. To run a - command in the background you must set it as a background - command with & at the end of the commands action (:com rm rm %f - &). Command name cannot contain numbers or special symbols - (except '?' and '!'). - - :com[mand] name /pattern - set search pattern. - - :com[mand] name =pattern - set local filter value. - - :com[mand] name filter{:filter args} - set file name filter (see :filter command description). For - example: - - " display only audio files - :command onlyaudio filter/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i - " display everything except audio files - :command noaudio filter!/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i - - :com[mand] cmd :commands - set kind of an alias for internal command (like in a shell). - Passes range given to alias to an aliased command, so running - :%cp after - :command cp :copy %a - equals - :%copy - - :compare - - :compare [byname | bysize | bycontents | listall | listunique | - listdups | ofboth | ofone | groupids | grouppaths | skipempty]... - compare files in one or two views according the arguments. The - default is "bycontents listall ofboth grouppaths". See "Compare - views" section below for details. Tree structure is - incompatible with alternative representations, so values of - 'lsview' and 'millerview' options are ignored. - - :copen - - :cope[n] - opens menu with contents of the last displayed menu with - navigation to files by default, if any. - - :copy - - :[range]co[py][!?][ &] - copy files to directory of other view. With "?" prompts for - destination file names in an editor. "!" forces overwrite. - - :[range]co[py][!] path[ &] - copy files to directory specified with the path (absolute or - relative to directory of other view). "!" forces overwrite. - - :[range]co[py][!] name1 name2...[ &] - copy files to directory of other view giving each next file a - corresponding name from the argument list. "!" forces - overwrite. - - :cquit - - :cq[uit][!] - same as :quit, but also aborts directory choosing via - --choose-dir (empties output file) and returns non-zero exit - code. - - :cunabbrev - - :cuna[bbrev] lhs - unregister command-line mode abbreviation by its lhs. - - :cuna[bbrev] rhs - unregister command-line mode abbreviation by its rhs, so that - abbreviation could be removed even after expansion. - - :delbmarks - - :delbmarks - remove bookmarks from current directory. - - :delbmarks tag1 [tag2 [tag3...]] - remove set of bookmarks that include all of the specified tags. - - :delbmarks! - remove all bookmarks. - - :delbmarks! path1 [path2 [path3...]] - remove bookmarks of listed paths. - - :delcommand - - :delc[ommand] user_command - remove user defined command named user_command. - - :delete - - :[range]d[elete][!][ &] - delete selected file or files. "!" means complete removal - (omitting trash). - - :[range]d[elete][!] [reg] [count][ &] - delete selected or [count] files to the reg register. "!" means - complete removal (omitting trash). - - :delmarks - - :delm[arks]! - delete all marks. - - :delm[arks] marks ... - delete specified marks, each argument is treated as a set of - marks. - - :display - - :di[splay] - display menu with registers content. - - :di[splay] list ... - display the contents of the numbered and named registers that - are mentioned in list (for example "az to display "", "a and "z - content). - - :dirs - - :dirs display directory stack. - - :echo - - :ec[ho] [...] - evaluate each argument as an expression and output them - separated with a space. See help on :let command for a - definition of . - - :edit - - :[range]e[dit] [file...] - open selected or passed file(s) in editor. Macros and - environment variables are expanded. - - :else - - :el[se] - execute commands until next matching :endif if all other - conditions didn't match. See also help on :if and :endif - commands. - - :elseif - - :elsei[f] {expr1} - execute commands until next matching :elseif, :else or :endif if - conditions of previous :if and :elseif branches were evaluated - to zero. See also help on :if and :endif commands. - - :empty - - :empty permanently remove files from all existing non-empty trash - directories (see "Trash directory" section below). Trash - directories which are specified via %r and/or %u also get - deleted completely. Also remove all operations from undolist - that have no sense after :empty and remove all records about - files located inside directories from all registers. Removal is - performed as background task with undetermined amount of work - and can be checked via :jobs menu. - - :endif - - :en[dif] - end conditional block. See also help on :if and :else commands. - - :execute - - :exe[cute] [...] - evaluate each argument as an expression and join results - separated by a space to get a single string which is then - executed as a command-line command. See help on :let command - for a definition of . - - :exit - - :exi[t][!] - same as :quit. - - :file - - :f[ile][ &] - display menu of programs set for the file type of the current - file. " &" forces running associated program in background. - - :f[ile] arg[ &] - run associated command that begins with the arg skipping opening - menu. " &" forces running associated program in background. - - :filetype - - :filet[ype] pattern-list [{descr}]def_prog[ &],[{descr}]prog2[ &],... - associate given program list to each of the patterns. - Associated program (command) is used by handlers of l and Enter - keys (and also in the :file menu). If you need to insert comma - into command just double it (",,"). Space followed by an - ampersand as two last characters of a command means running of - the command in the background. Optional description can be - given to each command to ease understanding of what command will - do in the :file menu. Vifm will try the rest of the programs - for an association when the default isn't found. When program - entry doesn't contain any of vifm macros, name of current file - is appended as if program entry ended with %c macro on *nix and - %"c on Windows. On Windows path to executables containing - spaces can (and should be for correct work with such paths) be - double quoted. See "Patterns" section below for pattern - definition. See also "Automatic FUSE mounts" section below. - Example for zip archives and several actions: - - filetype *.zip,*.jar,*.war,*.ear - \ {Mount with fuse-zip} - \ FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR, - \ {View contents} - \ zip -sf %c | less, - \ {Extract here} - \ tar -xf %c, - - Note that on OS X when `open` is used to call an app, vifm is - unable to check whether that app is actually available. So if - automatic skipping of programs that aren't there is desirable, - `open` should be replaced with an actual command. - - :filet[ype] filename - list (in menu mode) currently registered patterns that match - specified file name. Same as ":filextype filename". - - :filextype - - :filex[type] pattern-list [{ description }] def_program,program2,... - same as :filetype, but this command is ignored if not running in - X. In X :filextype is equal to :filetype. See "Patterns" - section below for pattern definition. See also "Automatic FUSE - mounts" section below. - - For example, consider the following settings (the order might - seem strange, but it's for the demonstration purpose): - - filetype *.html,*.htm - \ {View in lynx} - \ lynx - filextype *.html,*.htm - \ {Open with dwb} - \ dwb %f %i &, - filetype *.html,*.htm - \ {View in links} - \ links - filextype *.html,*.htm - \ {Open with firefox} - \ firefox %f &, - \ {Open with uzbl} - \ uzbl-browser %f %i &, - - If you're using vifm inside a terminal emulator that is running - in graphical environment (when X is used on *nix; always on - Windows), vifm attempts to run application in this order: - - 1. lynx - 2. dwb - 3. links - 4. firefox - 5. uzbl - - If there is no graphical environment (checked presence of - $DISPLAY environment variable on *nix; never happens on - Windows), the list will look like: - - 1. lynx - 2. links - - Just as if all :filextype commands were not there. - - The purpose of such differentiation is to allow comfortable use - of vifm with same settings in desktop environment/through remote - connection (SSH)/in native console. - - Note that on OS X $DISPLAY isn't defined unless you define it, - so :filextype should be used only if you set $DISPLAY in some - way. - - :filext[ype] filename - list (in menu mode) currently registered patterns that match - specified file name. Same as ":filetype filename". - - :fileviewer - - :filev[iewer] pattern-list command1,command2,... - register specified list of commands as viewers for each of the - patterns. Viewer is a command which output is captured and - displayed in one of the panes of vifm after pressing "e" or - running :view command. When the command doesn't contain any of - vifm macros, name of current file is appended as if command - ended with %c macro. Comma escaping and missing commands - processing rules as for :filetype apply to this command. See - "Patterns" section below for pattern definition. - - Example for zip archives: - - fileviewer *.zip,*.jar,*.war,*.ear zip -sf %c, echo "No zip to preview:" - - :filev[iewer] filename - list (in menu mode) currently registered patterns that match - specified filename. - - :filter - - :filter[!] {pattern} - filter files matching the pattern out of directory listings. - '!' controls state of filter inversion after updating filter - value (see also 'cpoptions' description). Filter is matched - case sensitively on *nix and case insensitively on Windows. See - "File Filters" and "Patterns" sections. - - Example: - - " filter all files ending in .o from the filelist. - :filter /.o$/ - - - :filter[!] {empty-pattern} - same as above, but use last search pattern as pattern value. - - Example: - - :filter //I - - - :filter - reset filter (set it to an empty string) and show all files. - - :filter! - same as :invert. - - :filter? - show information on local, name and auto filters. - - :find - - :[range]fin[d] pattern - display results of find command in the menu. Searches among - selected files if any. Accepts macros. By default the command - relies on the external "find" utility, which can be customized - by altering value of the 'findprg' option. - - :[range]fin[d] -opt... - same as :find above, but user defines all find arguments. - Searches among selected files if any. - - :[range]fin[d] path -opt... - same as :find above, but user defines all find arguments. - Ignores selection and range. - - :[range]fin[d] - repeat last :find command. - - :finish - - :fini[sh] - stop sourcing a script. Can only be used in a vifm script file. - This is a quick way to skip the rest of the file. - - :goto - - :go[to] - change directory if necessary and put specified path under the - cursor. The path should be existing non-root path. Macros and - environment variables are expanded. - - :grep - - :[range]gr[ep][!] pattern - will show results of grep command in the menu. Add "!" to - request inversion of search (look for lines that do not match - pattern). Searches among selected files if any and no range - given. Ignores binary files by default. By default the command - relies on the external "grep" utility, which can be customized - by altering value of the 'grepprg' option. - - :[range]gr[ep][!] -opt... - same as :grep above, but user defines all grep arguments, which - are not escaped. Searches among selected files if any. - - :[range]gr[ep][!] - repeats last :grep command. "!" of this command inverts "!" in - repeated command. - - :help - - :h[elp] - show the help file. - - :h[elp] argument - is the same as using ':h argument' in vim. Use vifm- - to get help on vifm (tab completion works). This form of the - command doesn't work when 'vimhelp' option is off. - - :highlight - - :hi[ghlight] - display information about all highlight groups active at the - moment. - - :hi[ghlight] clear - reset all highlighting to builtin defaults and removed all - filename-specific rules. - - :hi[ghlight] clear ( {pat1,pat2,...} | /regexp/ ) - removes specified rule. - - :hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/ ) - display information on given highlight group or file name - pattern of color scheme used in the active view. - - :hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/[iI] ) - cterm=style | ctermfg=color | ctermbg=color - set style (cterm), foreground (ctermfg) or/and background - (ctermbg) parameters of highlight group or file name pattern for - color scheme used in the active view. - - All style values as well as color names are case insensitive. - - Available style values (some of them can be combined): - - bold - - underline - - reverse or inverse - - standout - - italic (on unsupported systems becomes reverse) - - none - - Available group-name values: - - Win - color of all windows (views, dialogs, menus) and default color - for their content (e.g. regular files in views) - - AuxWin - color of auxiliary areas of windows - - Border - color of vertical parts of the border - - TabLine - tab line color - - TabLineSel - color of the tip of selected tab - - TopLineSel - top line color of the current pane - - TopLine - top line color of the other pane - - CmdLine - the command line/status bar color - - ErrorMsg - color of error messages in the status bar - - StatusLine - color of the line above the status bar - - JobLine - color of job line that appears above the status line - - WildMenu - color of the wild menu items - - SuggestBox - color of key suggestion box - - CurrLine - line at cursor position in active view - - OtherLine - line at cursor position in inactive view - - Selected - color of selected files - - Directory - color of directories - - Link - color of symbolic links in the views - - BrokenLink - color of broken symbolic links - - Socket - color of sockets - - Device - color of block and character devices - - Executable - color of executable files - - Fifo - color of fifo pipes - - CmpMismatch - color of mismatched files in side-by-side comparison - by path - - User1..User9 - 9 colors which can be used via %* 'statusline' macro - - Available colors: - - -1 or default or none - default or transparent - - black and lightblack - - red and lightred - - green and lightgreen - - yellow and lightyellow - - blue and lightblue - - magenta and lightmagenta - - cyan and lightcyan - - white and lightwhite - - 0-255 - corresponding colors from 256-color palette - - Light versions of colors are regular colors with bold attribute set. - So order of arguments of :highlight command is important and it's - better to put "cterm" in front of others to prevent it from overwriting - attributes set by "ctermfg" or "ctermbg" arguments. - - For convenience of color scheme authors xterm-like names for 256 color - palette is also supported. The mapping is taken from - http://vim.wikia.com/wiki/Xterm256_color_names_for_console_Vim - Duplicated entries were altered by adding an underscore followed by - numerical suffix. - - 0 Black 86 Aquamarine1 172 Orange3 - 1 Red 87 DarkSlateGray2 173 LightSalmon3_2 - 2 Green 88 DarkRed_2 174 LightPink3 - 3 Yellow 89 DeepPink4_2 175 Pink3 - 4 Blue 90 DarkMagenta 176 Plum3 - 5 Magenta 91 DarkMagenta_2 177 Violet - 6 Cyan 92 DarkViolet 178 Gold3_2 - 7 White 93 Purple 179 LightGoldenrod3 - 8 LightBlack 94 Orange4_2 180 Tan - 9 LightRed 95 LightPink4 181 MistyRose3 - 10 LightGreen 96 Plum4 182 Thistle3 - 11 LightYellow 97 MediumPurple3 183 Plum2 - 12 LightBlue 98 MediumPurple3_2 184 Yellow3_2 - 13 LightMagenta 99 SlateBlue1 185 Khaki3 - 14 LightCyan 100 Yellow4 186 LightGoldenrod2 - 15 LightWhite 101 Wheat4 187 LightYellow3 - 16 Grey0 102 Grey53 188 Grey84 - 17 NavyBlue 103 LightSlateGrey 189 LightSteelBlue1 - 18 DarkBlue 104 MediumPurple 190 Yellow2 - 19 Blue3 105 LightSlateBlue 191 DarkOliveGreen1 - 20 Blue3_2 106 Yellow4_2 192 - DarkOliveGreen1_2 - 21 Blue1 107 DarkOliveGreen3 193 DarkSeaGreen1_2 - 22 DarkGreen 108 DarkSeaGreen 194 Honeydew2 - 23 DeepSkyBlue4 109 LightSkyBlue3 195 LightCyan1 - 24 DeepSkyBlue4_2 110 LightSkyBlue3_2 196 Red1 - 25 DeepSkyBlue4_3 111 SkyBlue2 197 DeepPink2 - 26 DodgerBlue3 112 Chartreuse2_2 198 DeepPink1 - 27 DodgerBlue2 113 DarkOliveGreen3_2 199 DeepPink1_2 - 28 Green4 114 PaleGreen3_2 200 Magenta2_2 - 29 SpringGreen4 115 DarkSeaGreen3 201 Magenta1 - 30 Turquoise4 116 DarkSlateGray3 202 OrangeRed1 - 31 DeepSkyBlue3 117 SkyBlue1 203 IndianRed1 - 32 DeepSkyBlue3_2 118 Chartreuse1 204 IndianRed1_2 - 33 DodgerBlue1 119 LightGreen_2 205 HotPink - 34 Green3 120 LightGreen_3 206 HotPink_2 - 35 SpringGreen3 121 PaleGreen1 207 MediumOrchid1_2 - 36 DarkCyan 122 Aquamarine1_2 208 DarkOrange - 37 LightSeaGreen 123 DarkSlateGray1 209 Salmon1 - 38 DeepSkyBlue2 124 Red3 210 LightCoral - 39 DeepSkyBlue1 125 DeepPink4_3 211 PaleVioletRed1 - 40 Green3_2 126 MediumVioletRed 212 Orchid2 - 41 SpringGreen3_2 127 Magenta3 213 Orchid1 - 42 SpringGreen2 128 DarkViolet_2 214 Orange1 - 43 Cyan3 129 Purple_2 215 SandyBrown - 44 DarkTurquoise 130 DarkOrange3 216 LightSalmon1 - 45 Turquoise2 131 IndianRed 217 LightPink1 - 46 Green1 132 HotPink3 218 Pink1 - 47 SpringGreen2_2 133 MediumOrchid3 219 Plum1 - 48 SpringGreen1 134 MediumOrchid 220 Gold1 - 49 MediumSpringGreen 135 MediumPurple2 221 - LightGoldenrod2_2 - 50 Cyan2 136 DarkGoldenrod 222 - LightGoldenrod2_3 - 51 Cyan1 137 LightSalmon3 223 NavajoWhite1 - 52 DarkRed 138 RosyBrown 224 MistyRose1 - 53 DeepPink4 139 Grey63 225 Thistle1 - 54 Purple4 140 MediumPurple2_2 226 Yellow1 - 55 Purple4_2 141 MediumPurple1 227 LightGoldenrod1 - 56 Purple3 142 Gold3 228 Khaki1 - 57 BlueViolet 143 DarkKhaki 229 Wheat1 - 58 Orange4 144 NavajoWhite3 230 Cornsilk1 - 59 Grey37 145 Grey69 231 Grey100 - 60 MediumPurple4 146 LightSteelBlue3 232 Grey3 - 61 SlateBlue3 147 LightSteelBlue 233 Grey7 - 62 SlateBlue3_2 148 Yellow3 234 Grey11 - 63 RoyalBlue1 149 DarkOliveGreen3_3 235 Grey15 - 64 Chartreuse4 150 DarkSeaGreen3_2 236 Grey19 - 65 DarkSeaGreen4 151 DarkSeaGreen2 237 Grey23 - 66 PaleTurquoise4 152 LightCyan3 238 Grey27 - 67 SteelBlue 153 LightSkyBlue1 239 Grey30 - 68 SteelBlue3 154 GreenYellow 240 Grey35 - 69 CornflowerBlue 155 DarkOliveGreen2 241 Grey39 - 70 Chartreuse3 156 PaleGreen1_2 242 Grey42 - 71 DarkSeaGreen4_2 157 DarkSeaGreen2_2 243 Grey46 - 72 CadetBlue 158 DarkSeaGreen1 244 Grey50 - 73 CadetBlue_2 159 PaleTurquoise1 245 Grey54 - 74 SkyBlue3 160 Red3_2 246 Grey58 - 75 SteelBlue1 161 DeepPink3 247 Grey62 - 76 Chartreuse3_2 162 DeepPink3_2 248 Grey66 - 77 PaleGreen3 163 Magenta3_2 249 Grey70 - 78 SeaGreen3 164 Magenta3_3 250 Grey74 - 79 Aquamarine3 165 Magenta2 251 Grey78 - 80 MediumTurquoise 166 DarkOrange3_2 252 Grey82 - 81 SteelBlue1_2 167 IndianRed_2 253 Grey85 - 82 Chartreuse2 168 HotPink3_2 254 Grey89 - 83 SeaGreen2 169 HotPink2 255 Grey93 - 84 SeaGreen1 170 Orchid - 85 SeaGreen1_2 171 MediumOrchid1 - - There are two colors (foreground and background) and only one bold - attribute. Thus single bold attribute affects both colors when - "reverse" attribute is used in vifm run inside terminal emulator. At - the same time linux native console can handle boldness of foreground - and background colors independently, but for consistency with terminal - emulators this is available only implicitly by using light versions of - colors. This behaviour might be changed in the future. - - Although vifm supports 256 colors in a sense they are supported by UI - drawing library, whether you will be able to use all of them highly - depends on your terminal. To set up terminal properly, make sure that - $TERM in the environment you run vifm is set to name of 256-color - terminal (on *nixes it can also be set via X resources), e.g. - xterm-256color. One can find list of available terminal names by - listing /usr/lib/terminfo/. Number of colors supported by terminal - with current settings can be checked via "tput colors" command. - - Here is the hierarchy of highlight groups, which you need to know for - using transparency: - JobLine - SuggestBox - StatusLine - WildMenu - User1..User9 - Border - CmdLine - ErrorMsg - Win - AuxWin - File name specific highlights - Directory - Link - BrokenLink - Socket - Device - Fifo - Executable - Selected - CurrLine - OtherLine - TopLine - TopLineSel - TabLine - TabLineSel - - "none" means default terminal color for highlight groups at the first - level of the hierarchy and transparency for all others. - - Here file name specific highlights mean those configured via globs ({}) - or regular expressions (//). At most one of them is applied per file - entry, namely the first that matches file name, hence order of - :highlight commands might be important in certain cases. - - :history - - :his[tory] - creates a pop-up menu of directories visited. - - :his[tory] x - x can be: - d[ir] or . show directory history. - c[md] or : show command line history. - s[earch] or / show search history and search forward on l key. - f[search] or / show search history and search forward on l key. - b[search] or ? show search history and search backward on l key. - i[nput] or @ show prompt history (e.g. on one file renaming). - fi[lter] or = show filter history (see description of the "=" - normal mode command). - - :histnext - - :histnext - same as . The main use case for this command is to work - around the common pain point of and being the same - ASCII character: one could alter the terminal emulator settings - to emit, for example, the `F1` keycode when Ctrl-I is pressed, - then `:noremap :histnext` in vifm, add "t" flag to the - 'cpoptions', and thus have both and working as - expected. - - :histprev - - :histprev - same as . - - :if - - :if {expr1} - starts conditional block. Commands are executed until next - matching :elseif, :else or :endif command if {expr1} evaluates - to non-zero, otherwise they are ignored. See also help on :else - and :endif commands. - - Example: - - if $TERM == 'screen.linux' - highlight CurrLine ctermfg=lightwhite ctermbg=lightblack - elseif $TERM == 'tmux' - highlight CurrLine cterm=reverse ctermfg=black ctermbg=white - else - highlight CurrLine cterm=bold,reverse ctermfg=black ctermbg=white - endif - - :invert - - :invert [f] - invert file name filter. - - :invert? [f] - show current filter state. - - :invert s - invert selection. - - :invert o - invert sorting order of the primary sorting key. - - :invert? o - show sorting order of the primary sorting key. - - :jobs - - :jobs shows menu of current backgrounded processes. - - :let - - :let $ENV_VAR = - sets environment variable. Warning: setting environment - variable to an empty string on Windows removes it. - - :let $ENV_VAR .= - append value to environment variable. - - :let &[l:|g:]opt = - sets option value. - - :let &[l:|g:]opt .= - append value to string option. - - :let &[l:|g:]opt += - increasing option value, adding sub-values. - - :let &[l:|g:]opt -= - decreasing option value, removing sub-values. - - Where could be a single-quoted string, double-quoted string, an - environment variable, function call or a concatanation of any of them - in any order using the '.' operator. Any whitespace is ignored. - - :locate - - :locate filename - use "locate" command to create a menu of filenames. Selecting a - file from the menu will reload the current file list in vifm to - show the selected file. By default the command relies on the - external "locate" utility (it's assumed that its database is - already built), which can be customized by altering value of the - 'locateprg' option. - - :locate - repeats last :locate command. - - :ls - - :ls lists windows of active terminal multiplexer (only when terminal - multiplexer is used). This is achieved by issuing proper - command for active terminal multiplexer, thus the list is not - handled by vifm. - - :lstrash - - :lstrash - displays a menu with list of files in trash. Each element of - the list is original path of a deleted file, thus the list can - contain duplicates. - - :mark - - :[range]ma[rk][?] x [/full/path] [filename] - Set mark x (a-zA-Z0-9) at /full/path and filename. By default - current directory is being used. If no filename was given and - /full/path is current directory then last file in [range] is - used. Using of macros is allowed. Question mark will stop - command from overwriting existing marks. - - :marks - - :marks create a pop-up menu of marks. - - :marks list ... - display the contents of the marks that are mentioned in list. - - :media - - :media only for *nix - display media management menu. See also 'mediaprg' option. - - :messages - - :mes[sages] - shows previously given messages (up to 50). - - :mkdir - - :[line]mkdir[!] dir ... - create directories at specified paths. The [line] can be used - to pick node in a tree-view. "!" means make parent directories - as needed. Macros are expanded. - - :move - - :[range]m[ove][!?][ &] - move files to directory of other view. With "?" prompts for - destination file names in an editor. "!" forces overwrite. - - :[range]m[ove][!] path[ &] - move files to directory specified with the path (absolute or - relative to directory of other view). "!" forces overwrite. - - :[range]m[ove][!] name1 name2...[ &] - move files to directory of other view giving each next file a - corresponding name from the argument list. "!" forces - overwrite. - - :nohlsearch - - :noh[lsearch] - clear selection in current pane. - - :normal - - :norm[al][!] commands - execute normal mode commands. If "!" is used, user defined - mappings are ignored. Unfinished last command is aborted as if - or was typed. A ":" should be completed as well. - Commands can't start with a space, so put a count of 1 (one) - before it. - - :only - - :on[ly] - switch to a one window view. - - :popd - - :popd remove pane directories from stack. - - :pushd - - :pushd[!] /curr/dir [/other/dir] - add pane directories to stack and process arguments like :cd - command. - - :pushd exchange the top two items of the directory stack. - - :put - - :[line]pu[t][!] [reg] [ &] - puts files from specified register (" by default) into current - directory. The [line] can be used to pick node in a tree-view. - "!" moves files "!" moves files from their original location - instead of copying them. During this operation no confirmation - dialogs will be shown, all checks are performed beforehand. - - :pwd - - :pw[d] show the present working directory. - - :qall - - :qa[ll][!] - exit vifm (add ! to skip saving changes and checking for active - backgrounded commands). - - :quit - - :q[uit][!] - if there is more than one tab, close the current one, otherwise - exit vifm (add ! to skip saving changes and checking for active - backgrounded commands). - - :redraw - - :redr[aw] - redraw the screen immediately. - - :registers - - :reg[isters] - display menu with registers content. - - :reg[isters] list ... - display the contents of the numbered and named registers that - are mentioned in list (for example "az to display "", "a and "z - content). - - :regular - - :regular - - switch to regular view leaving custom view. - :rename - - :[range]rename[!] - rename files using vi to edit names. ! means go recursively - through directories. - - :[range]rename name1 name2... - rename each of selected files to a corresponding name. - - :restart - - :restart - free a lot of things (histories, commands, etc.), reread - vifminfo and vifmrc files and run startup commands passed in the - argument list, thus losing all unsaved changes (e.g. recent - history or keys mapped in current session). - - :restore - - :[range]restore - restore file from trash directory, doesn't work outside one of - trash directories. See "Trash directory" section below. - - :rlink - - :[range]rlink[!?] - create relative symbolic links to files in directory of other - view. With "?" prompts for destination file names in an editor. - "!" forces overwrite. - - :[range]rlink[!] path - create relative symbolic links of files in directory specified - with the path (absolute or relative to directory of other view). - "!" forces overwrite. - - :[range]rlink[!] name1 name2... - create relative symbolic links of files in directory of other - view giving each next link a corresponding name from the - argument list. "!" forces overwrite. - - :screen - - :screen - toggle whether to use the terminal multiplexer or not. - A terminal multiplexer uses pseudo terminals to allow multiple - windows to be used in the console or in a single xterm. - Starting vifm from terminal multiplexer with appropriate support - turned on will cause vifm to open a new terminal multiplexer - window for each new file edited or program launched from vifm. - This requires screen version 3.9.9 or newer for the screen -X - argument or tmux (1.8 version or newer is recommended). - - :screen! - enable integration with terminal multiplexers. - - :screen? - display whether integration with terminal multiplexers is - enabled. - - Note: the command is called screen for historical reasons (when tmux - wasn't yet supported) and might be changed in future releases, or get - an alias. - - :select - - :[range]select - select files in the given range (current file if no range is - given). - - :select {pattern} - select files that match specified pattern. Possible {pattern} - forms are described in "Patterns" section below. Trailing slash - for directories is taken into account, so `:select! */ | invert - s` selects only files. - - :select //[iI] - same as item above, but reuses last search pattern. - - :select !{external command} - select files from the list supplied by external command. Files - are matched by full paths, relative paths are converted to - absolute ones beforehand. - - :[range]select! [{pattern}] - same as above, but resets previously selected items before - proceeding. - - :set - - :se[t] display all options that differ from their default value. - - :se[t] all - display all options. - - :se[t] opt1=val1 opt2='val2' opt3="val3" ... - sets given options. For local options both values are set. - You can use following syntax: - - for all options - option, option? and option& - - for boolean options - nooption, invoption and option! - - for integer options - option=x, option+=x and option-=x - - for string options - option=x and option+=x - - for string list options - option=x, option+=x and option-=x - - for enumeration options - option=x, option+=x and option-=x - - for set options - option=x, option+=x and option-=x - - for charset options - option=x, option+=x, option-=x and - option^=x - - the meaning: - - option - turn option on (for boolean) or print its value (for - all others) - - nooption - turn option off - - invoption - invert option state - - option! - invert option state - - option? - print option value - - option& - reset option to its default value - - option=x or option:x - set option to x - - option+=x - add/append x to option - - option-=x - remove (or subtract) x from option - - option^=x - toggle x presence among values of the option - - Option name can be prepended and appended by any number of - whitespace characters. - - :setglobal - - :setg[lobal] - display all global options that differ from their default value. - - :setg[lobal] all - display all global options. - - :setg[lobal] opt1=val1 opt2='val2' opt3="val3" ... - same as :set, but changes/prints only global options or global - values of local options. Changes to the latter might be not - visible until directory is changed. - - :setlocal - - :setl[ocal] - display all local options that differ from their default value. - - :setl[ocal] all - display all local options. - - :setl[ocal] opt1=val1 opt2='val2' opt3="val3" ... - same as :set, but changes/prints only local values of local - options. - - :shell - - :sh[ell][!] - start a shell in current directory. "!" suppresses spawning - dedicated window of terminal multiplexer for a shell. To make - vifm adaptive to environment it uses $SHELL if it's defined, - otherwise 'shell' value is used. - - - :siblnext - - :[count]siblnext[!] - - change directory to [count]th next sibling directory after - current path using value of global sort option of current pane. - "!" enables wrapping. - - For example, say, you're at /boot and root listing starts like - this: - - bin/ - boot/ - dev/ - ... - - Issuing :siblnext will navigate to /dev. - - - :siblprev - - :[count]siblprev[!] - same as :siblnext, but in the opposite direction. - - :sort - - :sor[t] - display dialog with different sorting methods, when one can - select primary sorting key. When 'viewcolumns' options is empty - and 'lsview' is off, changing primary sorting key will also - affect view look (in particular the second column of the view - will be changed). - - :source - - :so[urce] file - read command-line commands from the file. - - :split - - :sp[lit] - switch to a two window horizontal view. - - :sp[lit]! - toggle horizontal window splitting. - - :sp[lit] path - splits the window horizontally to show both file directories. - Also changes other pane to path (absolute or relative to current - directory of active pane). - - :substitute - - :[range]s[ubstitute]/pattern/string/[flags] - for each file in range replace a match of pattern with string. - - String can contain \0...\9 to link to capture groups (\0 - all match, - \1 - first group, etc.). - - Pattern is stored in search history. - - Available flags: - - - i - ignore case (the 'ignorecase' and 'smartcase' options are not - used) - - - I - don't ignore case (the 'ignorecase' and 'smartcase' options are - not used) - - - g - substitute all matches in each file name (each g toggles this) - - :[range]s[ubstitute]/pattern - substitute pattern with an empty string. - - :[range]s[ubstitute]//string/[flags] - use last pattern from search history. - - :[range]s[ubstitute] - repeat previous substitution command. - - :sync - - :sync [relative path] - change the other pane to the current pane directory or to some - path relative to the current directory. Using macros is - allowed. - - :sync! change the other pane to the current pane directory and - synchronize cursor position. If current pane displays custom - list of files, position before entering it is used (current one - might not make any sense). - - - :sync! [location | cursorpos | localopts | filters | filelist | tree | - all]... - change enumerated properties of the other pane to match - corresponding properties of the current pane. Arguments have - the following meanings: - - - location - current directory of the pane; - - - cursorpos - cursor position (doesn't make sense without - "location"); - - - localopts - all local options; - - - filters - all filters; - - - filelist - list of files for custom view (implies - "location"); - - - tree - tree structure for tree view (implies "location"); - - - all - all of the above. - - :tabclose - - :tabc[lose] - close current tab, unless it's the only one open at current - scope. - - :tabmove - - :tabm[ove] [N] - without the argument or with `$` as the argument, current tab - becomes the last tab. With the argument, current tab is moved - after the tab with the specified number. Argument of `0` moves - current tab to the first position. - - :tabname - - :tabname [name] - set, update or reset (when no argument is provided) name of the - current tab. - - :tabnew - - :tabnew [path] - create new tab. Accepts optional path for the new tab. Macros - and environment variables are expanded. - - :tabnext - - :tabn[ext] - switch to the next tab (wrapping around). - - :tabn[ext] {n} - go to the tab number {n}. Tab numeration starts with 1. - - :tabprevious - - :tabp[revious] - switch to the previous tab (wrapping around). - - :tabp[revious] {n} - go to the {n}-th previous tab. Note that :tabnext handles its - argument differently. - - :touch - - :[line]touch file... - create files at specified paths. Aborts on errors. Doesn't - update time of existing files. The [line] can be used to pick - node in a tree-view. Macros are expanded. - - :tr - - :[range]tr/pattern/string/ - for each file in range transliterate the characters which appear - in pattern to the corresponding character in string. When - string is shorter than pattern, it's padded with its last - character. - - :trashes - - :trashes - lists all valid trash directories in a menu. Only non-empty and - writable trash directories are shown. This is exactly the list - of directories that are cleared when :empty command is executed. - - :trashes? - same as :trashes, but also displays size of each trash - directory. - - :tree - - :tree turn pane into tree view with current directory as its root. - The tree view is implemented on top of a custom view, but is - automatically kept in sync with file system state and considers - all the filters. Thus the structure corresponds to what one - would see on visiting the directories manually. As a special - case for trees built out of custom view file-system tracking - isn't performed. - - To leave tree view go up from its root or use gh at any level of - the tree. Any command that changes directory will also do, in - particular, `:cd ..`. - - Tree structure is incompatible with alternative representations, - so values of 'lsview' and 'millerview' options are ignored. - - :tree! toggle current view in and out of tree mode. - - :undolist - - :undol[ist] - display list of latest changes. Use "!" to see actual commands. - - :unlet - - :unl[et][!] $ENV_VAR1 $ENV_VAR2 ... - remove environment variables. Add ! to omit displaying of - warnings about nonexistent variables. - - :unselect - - :[range]unselect - unselect files in the given range (current file if no range is - given). - - :unselect {pattern} - unselect files that match specified pattern. Possible {pattern} - forms are described in "Patterns" section below. Trailing slash - for directories is taken into account, so `:unselect */` - unselects directories. - - :unselect !{external command} - unselect files from the list supplied by external command. - Files are matched by full paths, relative paths are converted to - absolute ones beforehand. - - :unselect //[iI] - same as item above, but reuses last search pattern. - - :version - - :ve[rsion] - show menu with version information. - - :vifm - - :vifm same as :version. - - :view - - :vie[w] - toggle on and off the quick file view. See also 'quickview' - option. - - :vie[w]! - turn on quick file view if it's off. - - :volumes - - :volumes - only for MS-Windows - display menu with volume list. Hitting l (or Enter) key opens - appropriate volume in the current pane. - - :vsplit - - :vs[plit] - switch to a two window vertical view. - - :vs[plit]! - toggle window vertical splitting. - - :vs[plit] path - split the window vertically to show both file directories. And - changes other pane to path (absolute or relative to current - directory of active pane). - - :wincmd - - :[count]winc[md] {arg} - same as running Ctrl-W [count] {arg}. - - :windo - - :windo [command...] - execute command for each pane (same as :winrun % command). - - :winrun - - :winrun type [command...] - execute command for pane(s), which is determined by type - argument: - - ^ - top-left pane - - $ - bottom-right pane - - % - all panes - - . - current pane - - , - other pane - - :write - - :w[rite] - write vifminfo file. - - :wq - - :wq[!] same as :quit, but ! only disables check of backgrounded - commands. :wqall - - :wqa[ll][!] - same as :qall, but ! only disables check of backgrounded - commands. - - :xall - - :xa[ll][!] - same as :qall. - - :xit - - :x[it][!] - same as :quit. - - :yank - - :[range]y[ank] [reg] [count] - will yank files to the reg register. - - :map lhs rhs - - :map lhs rhs - map lhs key sequence to rhs in normal and visual modes. - - :map! lhs rhs - map lhs key sequence to rhs in command line mode. - - - :cmap :dmap :mmap :nmap :qmap - :vmap - - :cm[ap] lhs rhs - map lhs to rhs in command line mode. - - :dm[ap] lhs rhs - map lhs to rhs in dialog modes. - - :mm[ap] lhs rhs - map lhs to rhs in menu mode. - - :nm[ap] lhs rhs - map lhs to rhs in normal mode. - - :qm[ap] lhs rhs - map lhs to rhs in view mode. - - :vm[ap] lhs rhs - map lhs to rhs in visual mode. - - - :*map - - :cm[ap] - list all maps in command line mode. - - :dm[ap] - list all maps in dialog modes. - - :mm[ap] - list all maps in menu mode. - - :nm[ap] - list all maps in normal mode. - - :qm[ap] - list all maps in view mode. - - :vm[ap] - list all maps in visual mode. - - :*map beginning - - :cm[ap] beginning - list all maps in command line mode that start with the - beginning. - - :dm[ap] beginning - list all maps in dialog modes that start with the beginning. - - :mm[ap] beginning - list all maps in menu mode that start with the beginning. - - :nm[ap] beginning - list all maps in normal mode that start with the beginning. - - :qm[ap] beginning - list all maps in view mode that start with the beginning. - - :vm[ap] beginning - list all maps in visual mode that start with the beginning. - - :noremap - - :no[remap] lhs rhs - map the key sequence lhs to rhs for normal and visual modes, but - disallow mapping of rhs. - - :no[remap]! lhs rhs - map the key sequence lhs to rhs for command line mode, but - disallow mapping of rhs. - - :cnoremap :dnoremap :mnoremap :nnoremap :qnoremap - :vnoremap - - :cno[remap] lhs rhs - map the key sequence lhs to rhs for command line mode, but - disallow mapping of rhs. - - :dn[oremap] lhs rhs - map the key sequence lhs to rhs for dialog modes, but disallow - mapping of rhs. - - :mn[oremap] lhs rhs - map the key sequence lhs to rhs for menu mode, but disallow - mapping of rhs. - - :nn[oremap] lhs rhs - map the key sequence lhs to rhs for normal mode, but disallow - mapping of rhs. - - :qn[oremap] lhs rhs - map the key sequence lhs to rhs for view mode, but disallow - mapping of rhs. - - :vn[oremap] lhs rhs - map the key sequence lhs to rhs for visual mode, but disallow - mapping of rhs. - - :unmap - - :unm[ap] lhs - remove the mapping of lhs from normal and visual modes. - - :unm[ap]! lhs - remove the mapping of lhs from command line mode. - - :cunmap :dunmap :munmap :nunmap :qunmap - :vunmap - - :cu[nmap] lhs - remove the mapping of lhs from command line mode. - - :du[nmap] lhs - remove the mapping of lhs from dialog modes. - - :mu[nmap] lhs - remove the mapping of lhs from menu mode. - - :nun[map] lhs - remove the mapping of lhs from normal mode. - - :qun[map] lhs - remove the mapping of lhs from view mode. - - :vu[nmap] lhs - remove the mapping of lhs from visual mode. - -Ranges - The ranges implemented include: - 2,3 - from second to third file in the list (including it) - % - the entire directory. - . - the current position in the filelist. - $ - the end of the filelist. - 't - the mark position t. - - Examples: - - :%delete - - would delete all files in the directory. - - :2,4delete - - would delete the files in the list positions 2 through 4. - - :.,$delete - - would delete the files from the current position to the end of the - filelist. - - :3delete4 - - would delete the files in the list positions 3, 4, 5, 6. - - If a backward range is given :4,2delete - an query message is given and - user can chose what to do next. - - The builtin commands that accept a range are :d[elete] and :y[ank]. - -Command macros - The command macros may be used in user commands. - - %a User arguments. When user arguments contain macros, they are - expanded before preforming substitution of %a. - - %c %"c The current file under the cursor. - - %C %"C The current file under the cursor in the other directory. - - %f %"f All of the selected files. - - %F %"F All of the selected files in the other directory list. - - %b %"b Same as %f %F. - - %d %"d Full path to current directory. - - %D %"D Full path to other file list directory. - - %rx %"rx - Full paths to files in the register {x}. In case of invalid - symbol in place of {x}, it's processed with the rest of the line - and default register is used. - - %m Show command output in a menu. - - %M Same as %m, but l (or Enter) key is handled like for :locate and - :find commands. - - %u Process command output as list of paths and compose custom view - out of it. - - %U Same as %u, but implies less list updates inside vifm, which is - absence of sorting at the moment. - - %Iu same as %u, but gives up terminal before running external - command. - - %IU same as %U, but gives up terminal before running external - command. - - %S Show command output in the status bar. - - %q redirect command output to quick view, which is activated if - disabled. - - %s Execute command in split window of active terminal multiplexer - (ignored if not running inside one). - - %n Forbid using of terminal multiplexer to run the command. - - %i Completely ignore command output. - - - %pc Marks end of the main command and beginning of the clear command - for graphical preview, which is invoked on closing preview of a - file. - - The following dimensions and coordinates are in characters: - - %px x coordinate of top-left corner of preview area. - - %py y coordinate of top-left corner of preview area. - - %pw width of preview area. - - %ph height of preview area. - - - Use %% if you need to put a percent sign in your command. - - Note that %m, %M, %s, %S, %i, %u and %U macros are mutually exclusive. - Only the last one of them on the command will take effect. - - You can use file name modifiers after %c, %C, %f, %F, %b, %d and %D - macros. Supported modifiers are: - - - :p - full path - - - :u - UNC name of path (e.g. "\\server" in - "\\server\share"), Windows only. Expands to current computer name - for not UNC paths. - - - :~ - relative to the home directory - - - :. - relative to current directory - - - :h - head of the file name - - - :t - tail of the file name - - - :r - root of the file name (without last extension) - - - :e - extension of the file name (last one) - - - :s?pat?sub? - substitute the first occurrence of pat with sub. - You can use any character for '?', but it must not occur in pat or - sub. - - - :gs?pat?sub? - like :s, but substitutes all occurrences of pat with - sub. - - See ':h filename-modifiers' in Vim's documentation for the detailed - description. - - Using %x means expand corresponding macro escaping all characters that - have special meaning. And %"x means using of double quotes and escape - only backslash and double quote characters, which is more useful on - Windows systems. - - Position and quantity (if there is any) of %m, %M, %S or %s macros in - the command is unimportant. All their occurrences are removed from the - resulting command. - - %c and %f macros are expanded to file names only, when %C and %F are - expanded to full paths. %f and %F follow this in %b too. - - :com move mv %f %D - set the :move command to move all of the files selected in the - current directory to the other directory. - - The %a macro is replaced with any arguments given to an alias command. - All arguments are considered optional. - :com lsl !!ls -l %a - set the lsl command to execute ls -l with - or without an argument. - - :lsl - will list the directory contents of the current directory. - - :lsl filename - will list only the given filename. - - The macros can also be used in directly executing commands. ":!mv %f - %D" would move the current directory selected files to the other - directory. - - Appending & to the end of a command causes it to be executed in the - background. Typically you want to run two kinds of external commands - in the background: - - - GUI applications that doesn't fork thus block vifm (:!sxiv %f &); - - - console tools that do not work with terminal (:!mv %f %D &). - - You don't want to run terminal commands, which require terminal input - or output something in background because they will mess up vifm's TUI. - Anyway, if you did run such a command, you can use Ctrl-L key to update - vifm's TUI. - - Rewriting the example command with macros given above with - backgrounding: - - %m, %M, %s, %S, %u and %U macros cannot be combined with background - mark (" &") as it doesn't make much sense. - -Command backgrounding - Copy and move operation can take a lot of time to proceed. That's why - vifm supports backgrounding of this two operations. To run :copy, - :move or :delete command in the background just add " &" at the end of - a command. - - For each background operation a new thread is created. Currently job - cannot be stopped or paused. - - You can see if command is still running in the :jobs menu. - Backgrounded commands have progress instead of process id at the line - beginning. - - Background operations cannot be undone. - -Cancellation - Note that cancellation works somewhat different on Windows platform due - to different mechanism of break signal propagation. One also might - need to use Ctrl-Break shortcut instead of Ctrl-C. - - There are two types of operations that can be cancelled: - - - file system operations; - - - mounting with FUSE (but not unmounting as it can cause loss of - data); - - - calls of external applications. - - Note that vifm never terminates applications, it sends SIGINT signal - and lets the application quit normally. - - When one of set of operations is cancelled (e.g. copying of 5th file of - 10 files), further operations are cancelled too. In this case undo - history will contain only actually performed operations. - - Cancelled operations are indicated by "(cancelled)" suffix appended to - information message on statusbar. - - File system operations - - Currently the following commands can be cancelled: :alink, :chmod, - :chown, :clone, :copy, :delete, :mkdir, :move, :restore, :rlink, - :touch. File putting (on p/P key) can be cancelled as well. It's not - hard to see that these are mainly long-running operations. - - Cancelling commands when they are repeated for undo/redo operations is - allowed for convenience, but is not recommended as further undo/redo - operations might get blocked by side-effects of partially cancelled - group of operations. - - These commands can't be cancelled: :empty, :rename, :substitute, :tr. - - Mounting with FUSE - - It's not considered to be an error, so only notification on the status - bar is shown. - - External application calls - - Each of this operations can be cancelled: :apropos, :find, :grep, - :locate. - -Patterns - :highlight, :filetype, :filextype, :fileviewer commands and 'classify' - option support globs, regular expressions and mime types to match file - names or their paths. - - There are six possible ways to write a single pattern: - - 1. [!]{comma-separated-name-globs} - - 2. [!]{{comma-separated-path-globs}} - - 3. [!]/name-regular-expression/[iI] - - 4. [!]//path-regular-expression//[iI] - - 5. [!] - - 6. undecorated-pattern - - Flags of regular expressions mean the following: - - "i" makes filter case insensitive; - - "I" makes filter case sensitive. They can be repeated multiple - times, but the later one takes precedence (e.g. "iiiI" is equivalent - to "I" and "IiIi" is the same as "i"). - - To combine several patterns (AND them), make sure you're using one of - the first five forms and write patterns one after another, like this: - {*.vifm} - Mind that if you make a mistake the whole string will be treated as the - sixth form. - - :filetype, :filextype and :fileviewer commands accept comma-separated - list of patterns instead of a single pattern, thus effectively handling - OR operation on them: - {*.vifm},{*.pdf} - - Five first forms can include leading exclamation mark that negates - pattern matching. - - The last form is implicitly refers to one of others. :highlight does - not accept undecorated form, while :filetype, :filextype, :fileviewer, - :select, :unselect and 'classify' treat it as list of name globs. - - Regular expression patterns are case insensitive by default, see - description of commands, which might override default behaviour. - - "Globs" section below provides short overview of globs and some - important points that one needs to know about them. - - Mime type matching is essentially globs matching applied to mime type - of a file instead of its name/path. Note: mime types aren't detected - on Windows. - -Globs - Globs are always case insensitive as it makes sense in general case. - - *, ?, [ and ] are treated as special symbols in the pattern. E.g. - - :filetype * less %c - - matches all files. One can use character classes for escaping, so - - :filetype [*] less %c - - matches only one file name, the one which contains only asterisk - symbol. - - * means any number of any characters (possibly an empty substring), - with one exception: asterisk at the pattern beginning doesn't match dot - in the first position. E.g. - - :fileviewer *.zip,*.jar zip -sf %c - - associates using of zip program to preview all files with zip or jar - extensions as listing of their content. - - ? means any character at this position. E.g. - - :fileviewer ?.out file %c - - calls file tool for all files which has exactly one character before - their extension (e.g. a.out, b.out). - - Square brackets designate character class, which means that whole - character class matches against any of characters listed in it. For - example - - :fileviewer *.[ch] highlight -O xterm256 -s dante --syntax c %c - - makes vifm call highlight program to colorize source and header files - in C language for a 256-color terminal. Equal command would be - - :fileviewer *.c,*.h highlight -O xterm256 -s dante --syntax c %c - - - Inside square brackets ^ or ! can be used for symbol class negotiation - and the - symbol to set a range. ^ and ! should appear right after the - opening square bracket. For example - - :filetype *.[!d]/ inspect_dir - - associates inspect_dir as additional handler for all directories that - have one character extension unless it's "d" letter. And - - :filetype [0-9].jpg sxiv - - associates sxiv picture viewer only for JPEG-files that contain single - digit in their name. - -:set options - Local options - These are kind of options that are local to a specific view. So - you can set ascending sorting order for left pane and descending - order for right pane. - - In addition to being local to views, each such option also has - two values: - - - local to current directory (value associated with current - location); - - - global to current directory (value associated with the - pane). - - The idea is that current directory can be made a temporary - exception to regular configuration of the view, until directory - change. Use :setlocal for that. :setglobal changes view value - not affecting settings until directory change. :set applies - changes immediately to all values. - - - 'aproposprg' - type: string - default: "apropos %a" - Specifies format for an external command to be invoked by the - :apropos command. The format supports expanding of macros, - specific for a particular *prg option, and %% sequence for - inserting percent sign literally. This option should include - the %a macro to specify placement of arguments passed to the - :apropos command. If the macro is not used, it will be - implicitly added after a space to the value of this option. - - 'autochpos' - type: boolean - default: true - When disabled vifm will set cursor to the first line in the view - after :cd and :pushd commands instead of saved cursor position. - Disabling this will also make vifm clear information about - cursor position in the view history on :cd and :pushd commands - (and on startup if 'autochpos' is disabled in the vifmrc). l - key in the ":history ." and ":trashes" menus are treated like - :cd command. This option also affects marks so that navigating - to a mark doesn't restore cursor position. - - When this option is enabled, more fine grained control over - cursor position is available via 'histcursor' option. - - 'columns' 'co' - type: integer - default: terminal width on startup - Terminal width in characters. - - 'caseoptions' - type: charset - default: "" - This option gives additional control over case sensitivity by - allowing overriding default behaviour to either always be case - sensitive or always be case insensitive. Possible values form - pairs of lower and upper case letters that configure specific - aspect of behaviour: - p - always ignore case of paths during completion. - P - always match case of paths during completion. - g - always ignore case of characters for f/F/;/,. - G - always match case of characters for f/F/;/,. - - At most one item of each pair takes affect, if both or more are - present, only the last one matters. When none of pair's - elements are present, the behaviour is default (depends on - operating system for path completion and on values of - 'ignorecase' and 'smartcase' options for file navigation). - - 'cdpath' 'cd' - type: string list - default: value of $CDPATH with commas instead of colons - Specifies locations to check on changing directory with relative - path that doesn't start with "./" or "../". When non-empty, - current directory is examined after directories listed in the - option. - - This option doesn't affect completion of :cd command. - - Example: - - set cdpath=~ - - This way ":cd bin" will switch to "~/bin" even if directory - named "bin" exists in current directory, while ":cd ./bin" - command will ignore value of 'cdpath'. - - 'chaselinks' - type: boolean - default: false - When enabled path of view is always resolved to real path (with - all symbolic links expanded). - - 'classify' - type: string list - default: ":dir:/" - Specifies file name prefixes and suffixes depending on file type - or name. The format is either of: - - [{prefix}]:{filetype}:[{suffix}] - - [{prefix}]::{pattern}::[{suffix}] - Possible {pattern} forms are described in "Patterns" section - above. - - Priority rules: - - file name patterns have priority over type patterns - - file name patterns are matched in left-to-right order of - their appearance in this option - - Either {prefix} or {suffix} or both can be omitted (which is the - default for all unspecified file types), this means empty - {prefix} and/or {suffix}. {prefix} and {suffix} should consist - of at most eight characters. Elements are separated by commas. - Neither prefixes nor suffixes are part of file names, so they - don't affect commands which operate on file names in any way. - Comma (',') character can be inserted by doubling it. List of - file type names can be found in the description of filetype() - function. - - 'confirm' 'cf' - type: set - default: delete,permdelete - Defines which operations require confirmation: - - delete - moving files to trash (on d or :delete); - - permdelete - permanent deletion of files (on D or :delete! - command or on undo/redo operation). - - 'cpoptions' 'cpo' - type: charset - default: "fst" - Contains a sequence of single-character flags. Each flag - enables behaviour of older versions of vifm. Flags: - - f - when included, running :filter command results in not - inverted (matching files are filtered out) and :filter! in - inverted (matching files are left) filter, when omitted, meaning - of the exclamation mark changes to the opposite; - - s - when included, yy, dd and DD normal mode commands act on - selection, otherwise they operate on current file only; - - t - when included, (thus ) behave as and - switches active pane, otherwise and go forward in - the view history. It's possible to make both and to - work as expected by setting up the terminal to emit a custom - sequence when is pressed; see :histnext for details. - - 'cvoptions' - type: set - default: - Specifies whether entering/leaving custom views triggers events - that normally happen on entering/leaving directories: - - autocmds - trigger autocommands on entering/leaving custom - views; - - localopts - reset local options on entering/leaving custom - views; - - localfilter - reset local filter on entering/leaving custom - views. - - 'deleteprg' - type: string - default: "" - Specifies program to run on files that are permanently removed. - When empty, files are removed as usual, otherwise this command - is invoked on each file by appending its name. If the command - doesn't remove files, they will remain on the file system. - - 'dirsize' - type: enumeration - default: size - Controls how size of directories is displayed in file views. - The following values are possible: - - size - size of directory (i.e., size used to store list of - files) - - nitems - number of entries in the directory (excluding . and - ..) - - Size obtained via ga/gA overwrites this setting so seeing count - of files and occasionally size of directories is possible. - - 'dotdirs' - type: set - default: nonrootparent - Controls displaying of dot directories. The following values - are possible: - - rootparent - show "../" in root directory of file system - - nonrootparent - show "../" in non-root directories of file - system - - Note that empty directories always contain "../" entry - regardless of value of this option. "../" disappears at the - moment at least one file is created. - - 'dotfiles' - type: boolean - default: false - Whether dot files are shown in the view. Can be controlled with - z* bindings. - - 'fastrun' - type: boolean - default: false - With this option turned on you can run partially entered - commands with unambiguous beginning using :! (e.g. :!Te instead - of :!Terminal or :!Te). - - 'fillchars' 'fcs' - type: string list - default: "" - Sets characters used to fill borders. - - item default used for - vborder:c ' ' left, middle and right vertical - borders - - If value is omitted, its default value is used. Example: - - set fillchars=vborder:. - - 'findprg' - type: string - default: "find %s %a -print , -type d \( ! -readable -o ! - -executable \) -prune" - Specifies format for an external command to be invoked by the - :find command. The format supports expanding of macros, - specific for a particular *prg option, and %% sequence for - inserting percent sign literally. This option should include - the %s macro to specify placement of list of paths to search in - and %a or %A macro to specify placement of arguments passed to - the :find command. If some of the macros are not used, they - will be implicitly added after a space to the value of the - option in the following order: %s, %a. Note that when neither - %a nor %A are specified, it's %a which is added implicitly. - - The macros can slightly change their meaning depending on :find - command arguments. When the first argument points to an - existing directory, %s is assigned all arguments and %a/%A are - left empty. Otherwise, %s is assigned a dot (".") meaning - current directory or list of selected file names, if any. %a/%A - are assigned arguments when first argument starts with a dash - ("-"), otherwise %a gets an escaped version of arguments, - prepended by "-name" (on *nix) or "-iname" (on Windows) - predicate. - - %a and %A macros contain almost the same value, the difference - is that %a can be escaped and %A is never escaped. %A is to be - used mainly on Windows, where shell escaping is a mess and can - break command execution. - - Optional %u or %U macro could be used (if both specified %U is - chosen) to force redirection to custom or unsorted custom view - respectively. - - Starting from Windows Server 2003 a where command is available, - one can configure vifm to use it in the following way: - - set findprg="where /R %s %A" - - As the syntax of this command is rather limited, one can't use - :find command with selection of more than one item in this case. - The command looks for files only completely ignoring - directories. - - When using find port on Windows, another option is to setup - 'findprg' like this: - - set findprg="find %s %a" - - 'followlinks' - type: boolean - default: true - Follow links on l or Enter. That is navigate to destination - file instead of treating the link as if it were target file. - Doesn't affects links to directories, which are always entered - (use gf key for directories). - - 'fusehome' - type: string - default: "($XDG_DATA_HOME/.local/share | $VIFM)/fuse/" - Directory to be used as a root dir for FUSE mounts. Value of - the option can contain environment variables (in form - "$envname"), which will be expanded (prepend it with a slash to - prevent expansion). The value should expand to an absolute - path. - - If you change this option, vifm won't remount anything. It - affects future mounts only. See "Automatic FUSE mounts" section - below for more information. - - 'gdefault' 'gd' - type: boolean - default: false - When on, 'g' flag is on for :substitute by default. - - 'grepprg' - type: string - default: "grep -n -H -I -r %i %a %s" - Specifies format for an external command to be invoked by the - :grep command. The format supports expanding of macros, - specific for a particular *prg option, and %% sequence for - inserting percent sign literally. This option should include - the %i macro to specify placement of "-v" string when inversion - of results is requested, %a or %A macro to specify placement of - arguments passed to the :grep command and the %s macro to - specify placement of list of files to search in. If some of the - macros are not used, they will be implicitly added after a space - to the value of the 'grepprg' option in the following order: %i, - %a, %s. Note that when neither %a nor %A are specified, it's %a - which is added implicitly. - - Optional %u or %U macro could be used (if both specified %U is - chosen) to force redirection to custom or unsorted custom view - respectively. - - See 'findprg' option for description of difference between %a - and %A. - - Example of setup to use ack (http://beyondgrep.com/) instead of - grep: - - set grepprg='ack -H -r %i %a %s' - - or The Silver Searcher - (https://github.com/ggreer/the_silver_searcher): - - set grepprg='ag --line-numbers %i %a %s' - - - - 'histcursor' - type: set - default: startup,dirmark,direnter - Defines situations when cursor should be moved according to - directory history: - - startup - on loading file lists during startup - - dirmark - after navigating to a mark that doesn't specify - file - - direnter - on opening directory from a file list - - This option has no effect when 'autochpos' is disabled. - - Note that the list is not exhaustive and there are other - situations when cursor is positioned automatically. - - 'history' 'hi' - type: integer - default: 15 - Maximum number of stored items in all histories. - - 'hlsearch' 'hls' - type: boolean - default: true - Highlight all matches of search pattern. - - 'iec' type: boolean - default: false - Use KiB, MiB, ... suffixes instead of K, M, ... when printing - size in human-friendly format. - - 'ignorecase' 'ic' - type: boolean - default: false - Ignore case in search patterns (:substitute, / and ? commands) - and characters after f and F commands. It doesn't affect file - filtering. - - 'incsearch' 'is' - type: boolean - default: false - When this option is set, search and view update for local filter - is be performed starting from initial cursor position each time - search pattern is changed. - - 'iooptions' - type: set - default: - Controls details of file operations. The following values are - available: - - fastfilecloning - perform fast file cloning (copy-on-write), - when available - (available on Linux and btrfs file system). - - 'laststatus' 'ls' - type: boolean - default: true - Controls if status bar is visible. - - 'lines' - type: integer - default: terminal height on startup - Terminal height in lines. - - 'locateprg' - type: string - default: "locate %a" - Specifies format for an external command to be invoked by the - :locate command. The format supports expanding of macros, - specific for a particular *prg option, and %% sequence for - inserting percent sign literally. This option should include - the %a macro to specify placement of arguments passed to the - :locate command. If the macro is not used, it will be - implicitly added after a space to the value of this option. - - Optional %u or %U macro could be used (if both specified %U is - chosen) to force redirection to custom or unsorted custom view - respectively. - - 'mediaprg' - type: string - default: path to bundled script that supports udevil and udisks - {only for *nix} - Specifies command to be used to manage media devices. Used by - :media command. - - The command can be passed the following parameters: - - list -- list media - - mount {device} -- mount a device - - unmount {path} -- unmount given mount point - - The output of `list` subcommand is parsed in search of lines - that start with one of the following prefixes: - - device= - specifies device path (e.g., "/dev/sde") - - label= - specifies optional device label (e.g., "Memory - card") - - mount-point= - specifies a mount point (can be absent or - appear more than once) - - All other lines are ignored. Each `device=` starts a new - section describing a device which should include two other - possible prefixes. - - `list` subcommand is assumed to always succeed, while error - stream and exit code of `mount` and `unmount` is taken into - account to determine whether operation was performed - successfully. - - 'lsoptions' - type: string list - default: "" - scope: local - - Configures ls-like view. - - item used for - transposed filling view grid by columns rather than by - lines - - - 'lsview' - type: boolean - default: false - scope: local - When this option is set, directory view will be displayed in - multiple columns with file names similar to output of `ls -x` - command. See "ls-like view" section below for format - description. This option has no effect if 'millerview' is on. - - 'milleroptions' - type: string list - default: "lsize:1,csize:1,rsize:1" - scope: local - - Configures miller view. - - item default used for - lsize:num 0 left column - csize:num 1 center column (can't be disabled) - rsize:num 0 right column - - *size specifies ratios of columns. Each ratio is in the range - from 0 to 100 and values are adjusted to fit the limits. Zero - disables a column, but central (main) column can't be disabled. - - Example of two-column mode which is useful in combination with - :view command: - - set milleroptions=lsize:1,csize:2 - - - 'millerview' - type: boolean - default: false - scope: local - When this option is set, directory view will be displayed in - multiple cascading columns. Ignores 'lsview'. - - 'mintimeoutlen' - type: integer - default: 150 - The fracture of 'timeoutlen' in milliseconds that is waited - between subsequent input polls, which affects various - asynchronous operations (detecting changes made by external - applications, monitoring background jobs, redrawing UI). There - are no strict guarantees, however the higher this value is, the - less is CPU load in idle mode. - - 'number' 'nu' - type: boolean - default: false - scope: local - Print line number in front of each file name when 'lsview' - option is turned off. Use 'numberwidth' to control width of - line number. Also see 'relativenumber'. - - 'numberwidth' 'nuw' - type: integer - default: 4 - scope: local - Minimal number of characters for line number field. - - 'previewprg' - type: string - default: "" - scope: local - - External command to be used instead of preview programs - configured via :fileviewer command. - - Example: - - " always show git log in preview of files inside some repository - au DirEnter '~/git-repo/**/*' setl previewprg='git log --color -- %c 2>&1' - - 'quickview' - type: boolean - default: false - Whether quick view (:view) is currently active or not. - - 'relativenumber' 'rnu' - type: boolean - default: false - scope: local - Print relative line number in front of each file name when - 'lsview' option is turned off. Use 'numberwidth' to control - width of line number. Various combinations of 'number' and - 'relativenumber' lead to such results: - - nonumber number - - norelativenumber | first | 1 first - | second | 2 second - | third | 3 third - - relativenumber | 1 first | 1 first - | 0 second |2 second - | 1 third | 1 third - - - 'rulerformat' 'ruf' - type: string - default: "%l/%S " - Determines the content of the ruler. Its minimal width is 13 - characters and it's right aligned. Following macros are - supported: - %= - separation point between left and right aligned halves of - the line - %l - file number - %L - total number of files in view (including filtered out - ones) - %x - number of files excluded by filters - %0- - old name for %x macro - %S - number of displayed files - %= - separation point between left and right align items - %% - percent sign - %[ - designates beginning of an optional block - %] - designates end of an optional block - - Percent sign can be followed by optional minimum field width. - Add '-' before minimum field width if you want field to be right - aligned. - - Example: - - set rulerformat='%2l-%S%[ +%x%]' - - 'runexec' - type: boolean - default: false - Run executable file on Enter or l. - - 'scrollbind' 'scb' - type: boolean - default: false - When this option is set, vifm will try to keep difference of - scrolling positions of two windows constant. - - 'scrolloff' 'so' - type: integer - default: 0 - Minimal number of screen lines to keep above and below the - cursor. If you want cursor line to always be in the middle of - the view (except at the beginning or end of the file list), set - this option to some large value (e.g. 999). - - 'shell' 'sh' - type: string - default: $SHELL or "/bin/sh" or "cmd" (on MS-Windows) - Full path to the shell to use to run external commands. On *nix - a shell argument can be supplied. - - 'shortmess' 'shm' - type: charset - default: "p" - Contains a sequence of single-character flags. Each flag - enables shortening of some message displayed by vifm in the TUI. - Flags: - - M - shorten titles in windows of terminal multiplexers - created by vifm down to file name instead of using full path. - - T - truncate status-bar messages in the middle if they are - too long to fit on the command line. "..." will appear in the - middle. - - p - use tilde shortening in view titles. - - - 'showtabline' 'stal' - type: enumeration - default: multiple - Specifies when tab line should be displayed. Possible values: - - never - never display tab line - - multiple - show tab line only when there are at least two - tabs - - always - display tab line always - - Alternatively 0, 1 and 2 Vim-like values are also accepted and - correspond to "never", "multiple" and "always" respectively. - - 'sizefmt' - type: string list - default: "units:iec" - Configures the way size is formatted in human-friendly way. - - item value meaning - units: iec Use 1024 byte units (K or KiB, - etc.). - See 'iec' option. - si Use 1000 byte units (KB, etc.). - precision: i > 0 How many fraction digits to - consider. - {not set} Precision of 1 for integer part - < 10, - 0 otherwise (provides old - behaviour). - - Numbers are rounded from zero. Trailing zeros are dropped. - - Example: - - set sizefmt=units:iec,precision:2 - - - 'slowfs' - type: string list - default: "" - only for *nix - A list of mounter fs name beginnings (first column in /etc/mtab - or /proc/mounts) or paths prefixes for fs/directories that work - too slow for you. This option can be used to stop vifm from - making some requests to particular kinds of file systems that - can slow down file browsing. Currently this means don't check - if directory has changed, skip check if target of symbolic links - exists, assume that link target located on slow fs to be a - directory (allows entering directories and navigating to files - via gf). If you set the option to "*", it means all the systems - are considered slow (useful for cygwin, where all the checks - might render vifm very slow if there are network mounts). - - Example for autofs root /mnt/autofs: - - set slowfs+=/mnt/autofs - - 'smartcase' 'scs' - type: boolean - default: false - Overrides the ignorecase option if the search pattern contains - at least one upper case character. Only used when ignorecase - option is enabled. It doesn't affect file filtering. - - 'sort' type: string list - default: +name on *nix and +iname on Windows - scope: local - Sets list of sorting keys (first item is primary key, second is - secondary key, etc.): - [+-]ext - extension of files and directories - [+-]fileext - extension of files only - [+-]name - name (including extension) - [+-]iname - name (including extension, ignores case) - [+-]type - file type - (dir/reg/exe/link/char/block/sock/fifo) - [+-]dir - directory grouping (directory < file) - [+-]gid - group id (*nix only) - [+-]gname - group name (*nix only) - [+-]mode - file type derived from its mode (*nix only) - [+-]perms - permissions string (*nix only) - [+-]uid - owner id (*nix only) - [+-]uname - owner name (*nix only) - [+-]nlinks - number of hard links (*nix only) - [+-]inode - inode number (*nix only) - [+-]size - size - [+-]nitems - number of items in a directory (zero for files) - [+-]groups - groups extracted via regexps from 'sortgroups' - [+-]target - symbolic link target (empty for other file - types) - [+-]atime - time accessed (e.g. read, executed) - [+-]ctime - time changed (changes in metadata, e.g. mode) - [+-]mtime - time modified (when file contents is changed) - - Note: look for st_atime, st_ctime and st_mtime in "man 2 stat" - for more information on time keys. - - '+' means ascending sort for this key, and '-' means descending - sort. - - "dir" key is somewhat similar in this regard but it's added - implicitly: when "dir" is not specified, sorting behaves as if - it was the first key in the list. That's why if one wants - sorting algorithm to mix directories and files, "dir" should be - appended to sorting option, for example like this: - - set sort+=dir - - or - - set sort=-size,dir - - Value of the option is checked to include dir key and default - sorting key (name on *nix, iname on Windows). Here is what - happens if one of them is missing: - - - type key is added at the beginning; - - - default key is added at the end; - - all other keys are left untouched (at most they are moved). - - This option also changes view columns according to primary - sorting key set, unless 'viewcolumns' option is not empty. - - 'sortnumbers' - type: boolean - default: false - scope: local - Natural sort of (version) numbers within text. - - 'sortgroups' - type: string - default: "" - scope: local - Sets comma-separated list of regular expressions to use for - group sorting, double comma is literal comma. Each expression - should contain at least one group or its value will be - considered to be always empty. Only first match of each regular - expression is considered. Groups are considered from right to - first similar to 'sort', first group divides list of files into - sub-groups, each of which is sorted by the second group and so - on. - - Example: - set sortgroups=-(done|todo).* - this would put files with "-done" in their names above all files - with "-todo". - - 'sortorder' - type: enumeration - default: ascending - Sets sort order for primary key: ascending, descending. - - 'statusline' 'stl' - type: string - default: "" - Determines the content of the status line (the line right above - command-line). Empty string means use same format like in - previous versions. Following macros are supported: - - - %t - file name (considering value of the 'classify' option) - - - %T - symbolic link target (empty for other filetypes) - - - %f - file name relative to current directory (considers - 'classify') - - - %A - file attributes (permissions on *nix or properties on - Windows) %u - user name or uid (if it cannot be resolved) - - - %g - group name or gid (if it cannot be resolved) - - - %s - file size in human readable format - - - %E - size of selected files in human readable format, same as - %s when no files are selected, except that it will never show - size of ../ in visual mode, since it cannot be selected - - - %d - file modification date (uses 'timefmt' option) - - - %D - path of the other pane for single-pane layout - - - %a - amount of free space available at current partition - - - %z - short tips/tricks/hints that chosen randomly after one - minute period - - - %{} - evaluate arbitrary vifm expression '', e.g. - '&sort' - - - %* - resets or applies one of User1..User9 highlight groups; - reset happens when width field is 0 or not specified, one of - groups gets picked when width field is in the range from 1 to - 9 - - - all 'rulerformat' macros - - Percent sign can be followed by optional minimum field width. - Add '-' before minimum field width if you want field to be right - aligned. - - On Windows file properties include the following flags (upper - case means flag is on): - A - archive - H - hidden - I - content isn't indexed - R - readonly - S - system - C - compressed - D - directory - E - encrypted - P - reparse point (e.g. symbolic link) - Z - sparse file - - Example without colors: - - set statusline=" %t%= %A %10u:%-7g %15s %20d %{&sort} " - - Example with colors: - - highlight User1 ctermbg=yellow - highlight User2 ctermbg=blue ctermfg=white cterm=bold - set statusline="%1* %-26t %2* %= %1* %A %2* %7u:%-7g %1* %-5s %2* %d " - - - 'suggestoptions' - type: string list - default: - Controls when, for what and how suggestions are displayed. The - following values are available: - - normal - in normal mode; - - visual - in visual mode; - - view - in view mode; - - otherpane - use other pane to display suggestions, when - available; - - delay[:num] - display suggestions after a small delay (to - do not annoy if you just want to type a fast shortcut consisting - of multiple keys), num specifies the delay in ms (500 by - default), 'timeoutlen' at most; - - keys - include shortcuts (commands and selectors); - - foldsubkeys - fold multiple keys with common prefix; - - marks - include marks; - - registers[:num] - include registers, at most num files (5 by - default). - - 'syncregs' - type: string - default: - Specifies identifier of group of instances that share registers - between each other. When several instances of vifm have this - option set to identical value, they automatically synchronize - contents of their registers on operations which use them. - - 'syscalls' - type: boolean - default: false - When disabled, vifm will rely on external applications to - perform file-system operations, otherwise system calls are used - instead (much faster and supports progress tracking). The - option should eventually be removed. Mostly *nix-like systems - are affected. - - 'tabscope' - type: enumeration - default: global - Picks style of tabs, which defines what a single tab contains. - Possible values: - - global - tab describes complete UI of two views and how they - are arranged - - pane - tab is located "inside" a pane and manages it and - quick view - - 'tabstop' 'ts' - type: integer - default: value from curses library - Number of spaces that a Tab in the file counts for. - - 'timefmt' - type: string - default: "%m/%d %H:%M" - Format of time in file list. See "man 1 date" or "man 3 - strftime" for details. - - 'timeoutlen' 'tm' - type: integer - default: 1000 - The time in milliseconds that is waited for a mapped key in case - of already typed key sequence is ambiguous. - - 'title' - type: boolean - default: true when title can be restored, false otherwise - When enabled title of the terminal or terminal multiplexer's - window is updated according to current location. - - 'trash' - type: boolean - default: true - Use trash directory. See "Trash directory" section below. - - 'trashdir' - type: string - default: on *nix: - "%r/.vifm-Trash-%u,$VIFM/Trash,%r/.vifm-Trash" - or if $VIFM/Trash doesn't exist - "%r/.vifm-Trash-%u,$XDG_DATA_HOME/vifm/Trash,%r/.vifm-Trash" - on Windows: - "%r/.vifm-Trash,$XDG_DATA_HOME/vifm/Trash" - List of trash directory path specifications, separated with - commas. Each list item either defines an absolute path to trash - directory or a path relative to a mount point root when list - element starts with "%r/". Value of the option can contain - environment variables (of form "$envname"), which will be - expanded (prepend $ with a slash to prevent expansion). - Environment variables are expanded when the option is set. - - On *nix, if element ends with "%u", the mark is replaced with - real user ID and permissions are set so that only that only - owner is able to use it. - Note that even this setup is not completely secure when combined - with "%r/" and it's overall safer to keep files in home - directory, but that implies cost of copying files between - partitions. - - When new file gets cut (deleted) vifm traverses each element of - the option in the order of their appearance and uses first trash - directory that it was able to create or that is already - writable. - - Default value tries to use trash directory per mount point and - falls back to ~/.vifm/Trash on failure. - - Will attempt to create the directory if it does not exist. See - "Trash directory" section below. - - 'tuioptions' 'to' - type: charset - default: "ps" - Each flag configures some aspect of TUI appearance. The flags - are: - p - when included: - * file list inside a pane gets additional single character - padding on left and right sides; - * quick view and view mode get single character padding. - s - when included, left and right borders (side borders, hence - "s" character) are visible. - u - use Unicode characters in the TUI (Unicode ellipsis instead - of "..."). - - 'undolevels' 'ul' - type: integer - default: 100 - Maximum number of changes that can be undone. Note that here - single file operation is used as a unit, not operation, i.e. - deletion of 101 files will exceed default limit. - - 'vicmd' - type: string - default: "vim" - The actual command used to start vi. Ampersand sign at the end - (regardless whether it's preceded by space or not) means - backgrounding of command. - - Background flag is ignored in certain context where vifm waits - for the editor to finish. Such contexts include any command - that spawns editor to change list of file names or a command, - with :rename being one example. `-f` is also appended to - prevent forking in such cases, so the command needs to handle - the flag. - - Additionally `+{num}` and `+'call cursor()'` arguments are used - to position cursor when location is known. - - 'viewcolumns' - type: string - default: "" - scope: local - Format string containing list of columns in the view. When this - option is empty, view columns to show are chosen automatically - using sorting keys (see 'sort') as a base. Value of this option - is ignored if 'lsview' is set. See "Column view" section below - for format description. - - An example of setting the options for both panes (note :windo - command): - - windo set viewcolumns=-{name}..,6{size},11{perms} - - 'vixcmd' - type: string - default: value of 'vicmd' - Same as 'vicmd', but takes precedence over it when running in X. - - 'vifminfo' - type: set - default: bookmarks,bmarks - Controls what will be saved in the $VIFM/vifminfo file. - - bmarks - named bookmarks - bookmarks - marks, except special ones like '< and '> - tui - state of the user interface (sorting, number of - windows, quick - view state, active view) - dhistory - directory history - state - file name and dot filters and terminal - multiplexers integration - state - cs - primary color scheme - savedirs - save last visited directory (requires dhistory) - chistory - command line history - shistory - search history (/ and ? commands) - phistory - prompt history - fhistory - history of local filter (see description of the - "=" normal mode - command) - dirstack - directory stack overwrites previous stack, unless - stack of - current session is empty - registers - registers content - options - all options that can be set with the :set command - (obsolete) - filetypes - associated programs and viewers (obsolete) - commands - user defined commands (see :command description) - (obsolete) - - 'vimhelp' - type: boolean - default: false - Use vim help format. - - 'wildmenu' 'wmnu' - type: boolean - default: false - Controls whether possible matches of completion will be shown - above the command line. - - 'wildstyle' - type: enumeration - default: bar - Picks presentation style of wild menu. Possible values: - - bar - one-line with left-to-right cursor - - popup - multi-line with top-to-bottom cursor - - 'wordchars' - type: string list - default: "1-8,14-31,33-255" (that is all non-whitespace - characters) - Specifies which characters in command-line mode should be - considered as part of a word. Value of the option is comma- - separated list of ranges. If both endpoints of a range match, - single endpoint is enough (e.g. "a" = "a-a"). Both endpoints - are inclusive. There are two accepted forms: character - representing itself or number encoding character according to - ASCII table. In case of ambiguous characters (dash, comma, - digit) use numeric form. Accepted characters are in the range - from 0 to 255. Any Unicode character with code greater than 255 - is considered to be part of a word. - - The option affects Alt-D, Alt-B and Alt-F, but not Ctrl-W. This - is intentionally to allow two use cases: - - - Moving by WORDS and deletion by words. - - Moving by words and deletion by WORDS. - - To get the latter use the following mapping: - - cnoremap - - Also used for abbreviations. - - 'wrap' type: boolean - default: true - Controls whether to wrap text in quick view. - - 'wrapscan' 'ws' - type: boolean - default: true - Searches wrap around end of the list. - -Mappings - Map arguments - - LHS of mappings can be preceded by arguments which take the form of - special sequences: - - - Postpone UI updates until RHS is completely processed. - - In case of builtin mapping causing conflict for a user-defined - mapping (e.g., `t` builtin to a partially typed `ta` user- - defined mapping), ignore the builtin mapping and wait for input - indefinitely as opposed to default behaviour of triggering the - builtin mapping after a delay defined by 'timeoutlen'. Example: - - nnoremap tw :set wrap! - nnoremap tn :set number! - nnoremap tr :set relativenumber! - - Special sequences - - Since it's not easy to enter special characters there are several - special sequences that can be used in place of them. They are: - - Enter key. - - Escape key. - - - Space key. - - Less-than character (<). - - provides a way to disable a mapping (by mapping it to ). - - Backspace key (see key conflict description below). - - - Tabulation and Shift+Tabulation keys. - - - Home/End. - - - Arrow keys. - - - PageUp/PageDown. - - - Delete key. and mean different codes, but - is more common. - - - Insert key. - - ,,...,,,,,, - Control + some key (see key conflict description below). - - only for *nix - Control + Space. - - ,,..., - ,,..., Alt + some key. - - ,,..., - ,,..., only for *nix - Alt + Ctrl + some key. - - - - Functional keys. - - - - only for MS-Windows - functional keys with Control key pressed. - - - - only for MS-Windows - functional keys with Alt key pressed. - - - - only for MS-Windows - functional keys with Shift key pressed. - - Note that due to the way terminals process their input, several - keyboard keys might be mapped to single key code, for example: - - - and ; - - - and ; - - - and ; - - - etc. - - Most of the time they are defined consistently and don't cause - surprises, but and are treated differently in different - environments (although they match each other all the time), that's why - they correspond to different keys in vifm. As a consequence, if you - map or be sure to repeat the mapping with the other one so - that it works in all environments. Alternatively, provide your mapping - in one form and add one of the following: - - " if mappings with in the LHS work - map - " if mappings with in the LHS work - map - - Whitespace - - vifm removes whitespace characters at the beginning and end of - commands. That's why you may want to use at the end of rhs in - mappings. For example: - - cmap man - - will put "man " in line when you hit the key in the command line - mode. - -Expression syntax - Supported expressions is a subset of what VimL provides. - - Expression syntax summary, from least to most significant: - - expr1 expr2 - expr2 || expr2 .. logical OR - - expr2 expr3 - expr3 && expr3 .. logical AND - - expr3 expr4 - expr4 == expr4 equal - expr4 != expr4 not equal - expr4 > expr4 greater than - expr4 >= expr4 greater than or equal - expr4 < expr4 smaller than - expr4 <= expr4 smaller than or equal - - expr4 expr5 - expr5 + expr5 .. number addition - expr5 - expr5 .. number subtraction - - expr5 expr6 - expr6 . expr6 .. string concatenation - - expr6 expr7 - - expr6 unary minus - + expr6 unary plus - ! expr6 logical NOT - - expr7 number number constant - "string" string constant, \ is special - 'string' string constant, ' is doubled - &option option value - $VAR environment variable - v:var builtin variable - function(expr1, ...) function call - (expr1) nested expression - - ".." indicates that the operations in this level can be concatenated. - - expr1 - ----- - expr2 || expr2 - - Arguments are converted to numbers before evaluation. - - Result is non-zero if at least one of arguments is non-zero. - - It's right associative and with short-circuiting, so sub-expressions - are evaluated from left to right until result of whole expression is - determined (i.e., until first non-zero) or end of the expression. - - expr2 - ----- - expr3 && expr3 - - Arguments are converted to numbers before evaluation. - - Result is non-zero only if both arguments are non-zero. - - It's right associative and with short-circuiting, so sub-expressions - are evaluated from left to right until result of whole expression is - determined (i.e., until first zero) or end of the expression. - - expr3 - ----- - expr4 {cmp} expr4 - - Compare two expr4 expressions, resulting in a 0 if it evaluates to - false or 1 if it evaluates to true. - - equal == - not equal != - greater than > - greater than or equal >= - smaller than < - smaller than or equal <= - - Examples: - - 'a' == 'a' == 1 - 'a' > 'b' == 1 - 'a' == 'b' == 0 - '2' > 'b' == 0 - 2 > 'b' == 1 - 2 > '1b' == 1 - 2 > '9b' == 0 - -1 == -'1' == 1 - 0 == '--1' == 1 - - expr4 - ----- - expr5 + expr5 .. number addition expr5 - expr5 .. number - subtraction - - Examples: - - 1 + 3 - 3 == 1 - 1 + '2' == 3 - - expr5 - ----- - expr6 . expr6 .. string concatenation - - Examples: - - 'a' . 'b' == 'ab' - 'aaa' . '' . 'c' == 'aaac' - - expr6 - ----- - - - expr6 unary minus - + expr6 unary plus - ! expr6 logical NOT - - For '-' the sign of the number is changed. - For '+' the number is unchanged. - For '!' non-zero becomes zero, zero becomes one. - - A String will be converted to a Number first. - - These operations can be repeated and mixed. Examples: - - --9 == 9 - ---9 == -9 - -+9 == 9 - !-9 == 0 - !'' == 1 - !'x' == 0 - !!9 == 1 - - expr7 - ----- - - number number constant - ----- - - Decimal number. Examples: - - 0 == 0 - 0000 == 0 - 01 == 1 - 123 == 123 - 10000 == 10000 - - string - ------ - "string" string constant - - Note that double quotes are used. - - A string constant accepts these special characters: - \b backspace - \e escape - \n newline - \r return - \t tab - \\ backslash - \" double quote - - Examples: - - "\"Hello,\tWorld!\"" - "Hi,\nthere!" - - literal-string - -------------- - 'string' string constant - - Note that single quotes are used. - - This string is taken as it is. No backslashes are removed or have a - special meaning. The only exception is that two quotes stand for one - quote. - - Examples: - - 'All\slashes\are\saved.' - 'This string contains doubled single quotes ''here''' - - option - ------ - &option option value (local one is preferred, if exists) - &g:option global option value &l:option local - option value - - Examples: - - echo 'Terminal size: '.&columns.'x'.&lines - if &columns > 100 - - Any valid option name can be used here (note that "all" in ":set all" - is a pseudo option). See ":set options" section above. - - environment variable - -------------------- - $VAR environment variable - - The String value of any environment variable. When it is not defined, - the result is an empty string. - - Examples: - - 'This is my $PATH env: ' . $PATH - 'vifmrc at ' . $MYVIFMRC . ' is used.' - - builtin variable - -------------------- - v:var builtin variable - - Information exposed by vifm for use in scripting. - - v:count - count passed to : command, 0 by default. Can be used in mappings to - pass - count to a different command. - v:count1 - same as v:count, but 1 by default. - v:servername - See below. - - function call - ------------- - function(expr1, ...) function call - - See "Functions" section below. - - Examples: - - "'" . filetype('.') . "'" - filetype('.') == 'reg' - - expression nesting - ------------------ - (expr1) nested expression - - Groups any other expression of arbitrary complexity enforcing order in - which operators are applied. - - -Functions - USAGE RESULT DESCRIPTION - - chooseopt({opt}) String Queries choose parameters passed on - startup. - executable({expr}) Integer Checks whether {expr} command - available. - expand({expr}) String Expands special keywords in {expr}. - filetype({fnum} [, {resolve}]) - String Returns file type from position. - fnameescape({expr}) String Escapes {expr} for use in a :command. - getpanetype() String Returns type of current pane. - has({property}) Integer Checks whether instance has - {property}. - layoutis({type}) Integer Checks whether layout is of type - {type}. - paneisat({loc}) Integer Checks whether current pane is at - {loc}. - system({command}) String Executes shell command and returns - its output. - tabpagenr([{arg}]) Integer Returns number of current or last - tab. - term({command}) String Like system(), but for interactive - commands. - - chooseopt({opt}) - - Retrieves values of options related to file choosing. {opt} can be one - of: - files returns argument of --choose-files or empty string - dir returns argument of --choose-dir or empty string - cmd returns argument of --on-choose or empty string - delimiter returns argument of --delimiter or the default one (\n) - - executable({expr}) - - If {expr} is absolute or relative path, checks whether path destination - exists and refers to an executable, otherwise checks whether command - named {expr} is present in directories listed in $PATH. Checks for - various executable extensions on Windows. Returns boolean value - describing result of the check. - - Example: - - " use custom default viewer script if it's available and installed - " in predefined system directory, otherwise try to find it elsewhere - if executable('/usr/local/bin/defviewer') - fileview * /usr/local/bin/defviewer %c - else - if executable('defviewer') - fileview * defviewer %c - endif - endif - - expand({expr}) - - Expands environment variables and macros in {expr} just like it's done - for command-line commands. Returns a string. See "Command macros" - section above. - - Examples: - - " percent sign - :echo expand('%%') - " the last part of directory name of the other pane - :echo expand('%D:t') - " $PATH environment variable (same as `:echo $PATH`) - :echo expand('$PATH') - - filetype({fnum}[,{resolve}]) - - The result is a string, which represents file type and is one of the - list: - exe executables - reg regular files - link symbolic links - broken broken symbolic links (appears only when resolving) - dir directories - char character devices - block block devices - fifo pipes - sock *nix domain sockets - ? unknown file type (should not normally appear) - - The result can also be an empty string in case of invalid argument. - - Parameter {fnum} can have following values: - - '.' to get type of file under the cursor in the active pane - - numerical value base 1 to get type of file on specified line - number - - Optional parameter {resolve} is treated as a boolean and specifies - whether symbolic links should be resolved. - - fnameescape({expr}) - - Escapes parameter to make it suitable for use as an argument of a - :command. List of escaped characters includes %, which is doubled. - - Usage example: - - " navigate to most recently modified file in current directory - execute 'goto' fnameescape(system('ls -t | head -1')) - - getpanetype() - - Retrieves string describing type of current pane. Possible return - values: - regular regular file listing of some directory - custom custom file list (%u) - very-custom very custom file list (%U) - tree tree view - - has({property}) - - Allows examining internal parameters from scripts to e.g. figure out - environment in which application is running. Returns 1 if property is - true/present, otherwise 0 is returned. Currently the following - properties are supported (anything else will yield 0): - unix runs in *nix-like environment (including Cygwin) - win runs on Windows - - Usage example: - - " skip user/group on Windows - if !has('win') - let $RIGHTS = '%10u:%-7g ' - endif - - execute 'set' 'statusline=" %t%= %A '.$RIGHTS.'%15E %20d "' - - layoutis({type}) - - Checks whether current interface layout is {type} or not, where {type} - can be: - only single-pane mode - split double-pane mode (either vertical or horizon split) - vsplit vertical split (left and right panes) - hsplit horizontal split (top and bottom panes) - - Usage example: - - " automatically split vertically before enabling preview - :nnoremap w :if layoutis('only') | vsplit | endif | view! - - paneisat({loc}) - - Checks whether position of active pane in current layout matches one of - the following locations: - top pane reaches top border - bottom pane reaches bottom border - left pane reaches left border - right pane reaches right border - - system({command}) - - Runs the command in shell and returns its output (joined standard - output and standard error streams). All trailing newline characters - are stripped to allow easy appending to command output. Ctrl-C should - interrupt the command. - - Use this function to consume output of external commands that don't - require user interaction and term() for interactive commands that make - use of terminal and are capable of handling stream redirection. - - Usage example: - - " command to enter .git/ directory of git-repository (when ran inside one) - command! cdgit :execute 'cd' system('git rev-parse --git-dir') - - tabpagenr([{arg}]) - - When called without arguments returns number of current tab page base - one. - - When called with "$" as an argument returns number of the last tab page - base one, which is the same as number of tabs. - - term({command}) - - Same as system() function, but user interface is shutdown during the - execution of the command, which makes sure that external interactive - applications won't affect the way terminal is used by vifm. - - Usage example: - - " command to change directory by picking it via fzf - command! fzfcd :execute 'cd' "'".term('find -type d | fzf 2> /dev/tty')."'" - -Menus and dialogs - When navigating to some path from a menu there is a difference in end - location depending on whether path has trailing slash or not. Files - normally don't have trailing slashes so "file/" won't work and one can - only navigate to a file anyway. On the other hand with directories - there are two options: navigate to a directory or inside of it. To - allow both use cases, the first one is used on paths like "dir" and the - second one for "dir/". - - Commands - - :range navigate to a menu line. - - :exi[t][!] :q[uit][!] :x[it][!] - leave menu mode. - - :noh[lsearch] - reset search match highlighting. - - :w[rite] {dest} - write all menu lines into file specified by {dest}. - - General - - j, Ctrl-N - move down. - k, Ctrl-P - move up. - Enter, l - select and exit the menu. - Ctrl-L - redraw the menu. - - Escape, Ctrl-C, ZZ, ZQ, q - quit. - - In all menus - - The following set of keys has the same meaning as in normal mode. - - Ctrl-B, Ctrl-F - Ctrl-D, Ctrl-U - Ctrl-E, Ctrl-Y - /, ? - n, N - [count]G, [count]gg - H, M, L - zb, zt, zz - - zh - scroll menu items [count] characters to the right. - zl - scroll menu items [count] characters to the left. - zH - scroll menu items half of screen width characters to the right. - zL - scroll menu items half of screen width characters to the left. - - : - enter command line mode for menus (currently only :exi[t], :q[uit], - :x[it] and :{range} are supported). - - b - interpret content of the menu as list of paths and use it to create - custom view in place of previously active pane. See "Custom views" - section below. - B - same as above, but creates unsorted view. - - v - load menu content into quickfix list of the editor (Vim compatible - by assumption) or if list doesn't have separators after file names - (colons) open each line as a file name. - - - Below is description of additional commands and reaction on selection - in some menus and dialogs. - - Apropos menu - - Selecting menu item runs man on a given topic. Menu won't be closed - automatically to allow view several pages one by one. - - Command-line mode abbreviations menu - - Type dd on an abbreviation to remove it. - - c leaves menu preserving file selection and inserts right-hand side of - selected command into command-line. - - Color scheme menu - - Selecting name of a color scheme applies it the same way as if - ":colorscheme " was executed on the command-line. - - Commands menu - - Selecting command executes it with empty arguments (%a). - - dd on a command to remove. - - Marks menu - - Selecting mark navigates to it. - - dd on a mark to remove it. - - Bookmarks menu - - Selecting a bookmark navigates to it. - - Type dd on a bookmark to remove it. - - gf and e also work to make it more convenient to bookmark files. - - Trash (:lstrash) menu - - r on a file name to restore it from trash. - - dd deletes file under the cursor. - - Trashes menu - - dd empties selected trash in background. - - Directory history and Trashes menus - - Selecting directory name will change directory of the current view as - if :cd command was used. - - Directory stack menu - - Selecting directory name will rotate stack to put selected directory - pair at the top of the stack. - - Filetype menu - - Commands from vifmrc or typed in command-line are displayed above empty - line. All commands below empty line are from .desktop files. - - c leaves menu preserving file selection and inserts command after :! in - command-line mode. - - Grep, find, locate, bookmarks and user menu with navigation (%M macro) - - gf - navigate previously active view to currently selected item. - Leaves menu mode except for grep menu. Pressing Enter key has the same - effect. - - e - open selected path in the editor, stays in menu mode. - - c - leave menu preserving file selection and insert file name after :! - in command-line mode. - - User menu without navigation (%m macro) - - c leaves menu preserving file selection and inserts whole line after :! - in command-line mode. - - Grep menu - - Selecting file (via Enter or l key) opens it in editor set by 'vicmd' - at given line number. Menu won't be closed automatically to allow - viewing more than one result. - - See above for "gf" and "e" keys description. - - Command-line history menu - - Selecting an item executes it as command-line command, search query or - local filter. - - c leaves menu preserving file selection and inserts line into command- - line of appropriate kind. - - Volumes menu - - Selecting a drive navigates previously active pane to the root of that - drive. - - Fileinfo dialog - - Enter, q - close dialog - - Sort dialog - - h, Space - switch ascending/descending. - q - close dialog - - One shortcut per sorting key (see the dialog). - - Attributes (permissions or properties) dialog - - h, Space - check/uncheck. - q - close dialog - - Item states: - - - * - checked flag. - - - X - means that it has different value for files in selection. - - - d (*nix only) - (only for execute flags) means u-x+X, g-x+X or o-x+X - argument for the chmod program. If you're not on OS X and want to - remove execute permission bit from all files, but preserve it for - directories, set all execute flags to 'd' and check 'Set Recursively' - flag. - - Jobs menu - - dd requests cancellation of job under cursor. The job won't be removed - from the list, but marked as being cancelled (if cancellation was - successfully requested). A message will pop up if the job has already - stopped. Note that on Windows cancelling external programs like this - might not work, because their parent shell doesn't have any windows. - - e key displays errors of selected job if any were collected. They are - displayed in a new menu, but you can get back to jobs menu by pressing - h. - - - Undolist menu - - r - reset undo position to group under the cursor. - - - Media menu - - r - reload the list. - - m - mount/unmount device (cursor should be positioned on lines under - device information). - - -Custom views - Definition - - Normally file views contain list of files from a single directory, but - sometimes it's useful to populate them with list of files that do not - belong to the same directory, which is what custom views are for. - - Presentation - - Custom views are still related to directory they were in before custom - list was loaded. Path to that directory (original directory) can be - seen in the title of a custom view. - - Files in same directory have to be named differently, this doesn't hold - for custom views thus seeing just file names might be rather confusing. - In order to give an idea where files come from and when possible, - relative paths to original directory of the view is displayed, - otherwise full path is used instead. - - Custom views normally don't contain any inexistent files. - - Navigation - - Custom views have some differences related to navigation in regular - views. - - gf - acts similar to gf on symbolic links and navigates to the file at - its real - location. - - h - go to closes parent node in tree view, otherwise return to the - original directory. - - gh - return to the original directory. - - Opening ".." entry also causes return to the original directory. - - History - - Custom list exists only while it's visible, once left one can't return - to it, so there is no appearances of it in any history. - - Filters - - Only local filter affects content of the view. This is intentional, - presumably if one loads list, precisely that list should be displayed - (except for inexistent paths, which are ignored). - - Search - - Although directory names are visible in listing, they are not - searchable. Only file names are taken into account (might be changed - in future, searching whole lines seems quite reasonable). - - Sorting - - Contrary to search sorting by name works on whole visible part of file - path. - - Highlight - - Whole file name is highlighted as one entity, even if there are - directory elements. - - Updates - - Reloads can occur, though they are not automatic due to files being - scattered among different places. On a reload, inexistent files are - removed and meta-data of all other files is updated. - - Once custom view forgets about the file, it won't add it back even if - it's created again. So not seeing file previously affected by an - operation, which was undone is normal. - - Operations - - All operations that add files are forbidden for custom views. For - example, moving/copying/putting files into a custom view doesn't work, - because it doesn't make much sense. - - On the other hand, operations that use files of a custom view as a - source (e.g. yanking, copying, moving file from custom view, deletion) - and operations that modify names are all allowed. - -Compare views - Kinds - - :compare can produce four different results depending on arguments: - - single compare view (ofone and either listall or listdups); - - single custom view (ofone and listunique); - - two compare views (ofboth and either listall or listdups); - - two custom views (ofboth and listunique). - - The first two display files of one file system tree. Here duplicates - are files that have at least one copy in the same tree. The other two - kinds of operation compare two trees, in which duplicates are files - that are found in both trees. - - Lists of unique files are presented in custom views because there is no - file grouping to preserve as all file ids are guaranteed to be - distinct. - - Creation - - Arguments passed to :compare form four categories each with its own - prefix and is responsible for particular property of operation. - - Which files to compare: - - ofboth - compares files of two panes against each other; - - ofone - compares files of the same directory. - - How files are compared: - - byname - by their name only; - - bysize - only by their size; - - bycontents - by combination of size and hash of file contents. - - Which files to display: - - listall - all files; - - listunique - unique files only; - - listdups - only duplicated files. - - How results are grouped (has no effect if "ofone" specified): - - groupids - files considered identical are always adjacent in - output; - - grouppaths - file system ordering is preferred (this also enables - displaying identically named files as mismatches). - - Which files to omit: - - skipempty - ignore empty files. - - Each argument can appear multiple times, the rightmost one of the group - is considered. Arguments alter default behaviour instead of - substituting it. - - Examples - - The defaults corresponds to probably the most common use case of - comparing files in two trees with grouping by paths, so the following - are equivalent: - - :compare - :compare bycontents grouppaths - :compare bycontents listall ofboth grouppaths - - Another use case is to find duplicates in the current sub-tree: - - :compare listdups ofone - - The following command lists files that are unique to each pane: - - :compare listunique - - Look - - The view can't switch to ls-like view as it's unable to display diff- - like data. - - Comparison views have second column displaying id of the file, files - with same id are considered to be equal. The view columns - configuration is predefined. - - Behaviour - - When two views are being compared against each other the following - changes to the regular behaviour apply: - - views are scrolled synchronously (as if 'scrollbind' was set); - - views' cursors are synchronized; - - local filtering is disabled (its results wouldn't be meaningful); - - zd excludes groups of adjacent identical files, 1zd gives usual - behaviour; - - sorting is permanently disabled (ordering is fixed); - - removed files hide their counter pairs; - - exiting one of the views terminates the other immediately; - - renaming files isn't blocked, but isn't taken into account and might - require regeneration of comparison; - - entries which indicate absence of equivalent file have empty names - and can be matched as such; - - when unique files of both views are listed custom views can be - empty, this absence of unique files is stated clearly. - - One compare view has similar properties (those that are applicable for - single pane). - - Files are gathered in this way: - - recursively starting at current location of the view; - - dot files are excluded if view hides them at the moment of - comparison; - - directories are not taken into account; - - symbolic links to directories are ignored. - -Startup - On startup vifm determines several variables that are used during the - session. They are determined in the order they appear below. - - On *nix systems $HOME is normally present and used as is. On Windows - systems vifm tries to find correct home directory in the following - order: - - $HOME variable; - - $USERPROFILE variable (on Windows only); - - a combination of $HOMEDRIVE and $HOMEPATH variables (on Windows - only). - - vifm tries to find correct configuration directory by checking the - following places: - - $VIFM variable; - - parent directory of the executable file (on Windows only); - - $HOME/.vifm directory; - - $APPDATA/Vifm directory (on Windows only); - - $XDG_CONFIG_HOME/vifm directory; - - $HOME/.config/vifm directory. - - vifm tries to find correct configuration file by checking the following - places: - - $MYVIFMRC variable; - - vifmrc in parent directory of the executable file (on Windows only); - - $VIFM/vifmrc file. - -Configure - See "Startup" section above for the explanations on $VIFM and - $MYVIFMRC. - - The vifmrc file contains commands that will be executed on vifm - startup. There are two such files: global and local. Global one is at - {prefix}/etc/vifm/vifmrc, see $MYVIFMRC variable description for the - search algorithm used to find local vifmrc. Global vifmrc is loaded - before the local one, so that the later one can redefine anything - configured globally. - - Use vifmrc to set settings, mappings, filetypes etc. To use multi line - commands precede each next line with a slash (whitespace before slash - is ignored, but all spaces at the end of the lines are saved). For - example: - - set - \smartcase - - equals "setsmartcase". When - - set - \ smartcase - - equals "set smartcase". - - The $VIFM/vifminfo file contains session settings. You may edit it by - hand to change the settings, but it's not recommended to do that, edit - vifmrc instead. You can control what settings will be saved in - vifminfo by setting 'vifminfo' option. Vifm always writes this file on - exit unless 'vifminfo' option is empty. Marks, bookmarks, commands, - histories, filetypes, fileviewers and registers in the file are merged - with vifm configuration (which has bigger priority). - - Generally, runtime configuration has bigger priority during merging, - but there are some exceptions: - - - directory stack stored in the file is not overwritten unless - something is changed in vifm session that performs merge; - - - each mark or bookmark is marked with a timestamp, so that newer - value is not overwritten by older one, thus no matter from where it - comes, the newer one wins. - - The $VIFM/scripts directory can contain shell scripts. vifm modifies - its PATH environment variable to let user run those scripts without - specifying full path. All subdirectories of the $VIFM/scripts will be - added to PATH too. Script in a subdirectory overlaps script with the - same name in all its parent directories. - - The $VIFM/colors/ and {prefix}/etc/vifm/colors/ directories contain - color schemes. Available color schemes are searched in that order, so - on name conflict the one in $VIFM/colors/ wins. - - Each color scheme should have ".vifm" extension. This wasn't the case - before and for this reason the following rules apply during lookup: - - - if there is no file with .vifm extension, all regular files are - listed; - - - otherwise only files with .vifm extension are listed (with the - extension being truncated). - -Automatic FUSE mounts - vifm has a builtin support of automated FUSE file system mounts. It is - implemented using file associations mechanism. To enable automated - mounts, one needs to use a specially formatted program line in filetype - or filextype commands. Currently two formats are supported: - - 1) FUSE_MOUNT This format should be used in case when all information - needed for mounting all files of a particular type is the same. E.g. - mounting of tar files don't require any file specific options. - - Format line: - FUSE_MOUNT|mounter %SOURCE_FILE %DESTINATION_DIR [%FOREGROUND] - - Example filetype command: - - :filetype FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR - - 2) FUSE_MOUNT2 This format allows one to use specially formatted files - to perform mounting and is useful for mounting remotes, for example - remote file systems over ftp or ssh. - - Format line: - FUSE_MOUNT2|mounter %PARAM %DESTINATION_DIR [%FOREGROUND] - - Example filetype command: - - :filetype FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR - - Example file content: - - root@127.0.0.1:/ - - All % macros are expanded by vifm at runtime and have the following - meaning: - - %SOURCE_FILE is replaced by full path to selected file; - - %DESTINATION_DIR is replaced by full path to mount directory, which - is created by vifm basing on the value of 'fusehome' option; - - %PARAM value is filled from the first line of file (whole line), - though in the future it can be changed to whole file content; - - %FOREGROUND means that you want to run mount command as a regular - command (required to be able to provide input for communication with - mounter in interactive way). - - %FOREGROUND is an optional macro. Other macros are not mandatory, but - mount commands likely won't work without them. - - %CLEAR is obsolete name of %FOREGROUND, which is still supported, but - might be removed in future. Its use is discouraged. - - The mounted FUSE file systems will be automatically unmounted in two - cases: - - - when vifm quits (with ZZ, :q, etc. or when killed by signal); - - - when you explicitly leave mount point going up to its parent - directory (with h, Enter on "../" or ":cd ..") and other pane is - not in the same directory or its child directories. - -View look - vifm supports displaying of file list view in two different ways: - - - in a table mode, when multiple columns can be set using - 'viewcolumns' option (see "Column view" section below for details); - - - in a multicolumn list manner which looks almost like `ls -x` - command output (see "ls-like view" section below for details). - - The look is local for each view and can be chosen by changing value of - the 'lsview' boolean option. - - Depending on view look some of keys change their meaning to allow more - natural cursor moving. This concerns mainly h, j, k, l and other - similar navigation keys. - - Also some of options can be ignored if they don't affect view - displaying in selected look. For example value of 'viewcolumns' when - 'lsview' is set. - -ls-like view - When this view look is enabled by setting 'lsview' option on, vifm will - display files in multiple columns. Number of columns depends on the - length of the longest file name present in current directory of the - view. Whole file list is automatically reflowed on directory change, - terminal or view resize. - - View looks close to output of `ls -x` command, so files are listed left - to right in rows. - - In this mode file manipulation commands (e.g. d) don't work line-wise - like they do in Vim, since such operations would be uncommon for file - manipulation tasks. Thus, for example, dd will remove only current - file. - - By default the view is filled by lines, 'lsoptions' can be used to get - filling by columns. - - Note that tree-view and compare view inhibit ls-like view. - -Column view - View columns are described by a comma-separated list of column - descriptions, each of which has the following format - [ '-' ] [ fw ( [ '.' tw ] | '%' ) ] '{' type '}' '.'{0,3} - where fw stands for full width and tw stands for text width. - - So it basically consists of four parts: - 1. Optional alignment specifier - 2. Optional width specifier - 3. Mandatory column name - 4. Optional cropping specifier - - Alignment specifier - - It's an optional minus or asterisk sign as the first symbol of the - string. - - Specifies type of text alignment within a column. Three types are - supported: - - - left align - - set viewcolumns=-{name} - - - right align (default) - - set viewcolumns={name} - - - dynamic align - - It's like left alignment, but when the text is bigger than the - column, the alignment is made at the right (so the part of the field - is always visible). - - set viewcolumns=*{name} - - Width specifier - - It's a number followed by a percent sign, two numbers (second one - should be less than or equal to the first one) separated with a dot or - a single number. - - Specifies column width and its units. There are three size types: - - - absolute size - column width is specified in characters - - set viewcolumns=-100{name},20.15{ext} - - results in two columns with lengths of 100 and 20 and a reserved - space of five characters on the left of second column. - - - relative (percent) size - column width is specified in percents of - view width - - set viewcolumns=-80%{name},15%{ext},5%{mtime} - - results in three columns with lengths of 80/100, 15/100 and 5/100 of - view width. - - - auto size (default) - column width is automatically determined - - set viewcolumns=-{name},{ext},{mtime} - - results in three columns with length of one third of view width. - There is no size adjustment to content, since it will slow down - rendering. - - Columns of different sizing types can be freely mixed in one view. - Though sometimes some of columns can be seen partly or be completely - invisible if there is not enough space to display them. - - Column name - - This is just a sort key surrounded with curly braces or {root}, e.g. - - {name},{ext},{mtime} - - {name} and {iname} keys are the same and present both for consistency - with 'sort' option. - - Following keys don't have corresponding sorting keys: - - - {root} - display name without extension (as a complement for {ext}) - - Empty curly braces ({}) are replaced with the default secondary column - for primary sort key. So after the next command view will be displayed - almost as if 'viewcolumns' is empty, but adding ellipsis for long file - names: - - set viewcolumns=-{name}..,6{}. - - Cropping specifier - - It's from one to three dots after closing curly brace in column format. - - Specifies type of text truncation if it doesn't fit in the column. - Currently three types are supported: - - - truncation - text is truncated - - set viewcolumns=-{name}. - - results in truncation of names that are too long too fit in the - view. - - - adding of ellipsis - ellipsis on the left or right are added when - needed - - set viewcolumns=-{name}.. - - results in that ellipsis are added at the end of too long file - names. - - - none (default) - text can pass column boundaries - - set viewcolumns=-{name}...,{ext} - - results in that long file names can partially be written on the ext - column. - -Color schemes - The color schemes in vifm can be applied in two different ways: - - - as the primary color scheme; - - - as local to a pane color scheme. - - Both types are set using :colorscheme command, but of different forms: - - - :colorscheme color_scheme_name - for the primary color scheme; - - - :colorscheme color_scheme_name directory - for local color schemes. - - Look of different parts of the TUI (Text User Interface) is determined - in this way: - - - Border, TabLine, TabLineSel, TopLineSel, TopLine, CmdLine, - ErrorMsg, StatusLine, JobLine, SuggestBox and WildMenu are always - determined by the primary color scheme; - - - CurrLine, Selected, Directory, Link, BrokenLink, Socket, Device, - Executable, Fifo, CmpMismatch, Win and AuxWin are determined by - primary color scheme and a set of local color schemes, which can be - empty. - - There might be a set of local color schemes because they are structured - hierarchically according to file system structure. For example, having - the following piece of file system: - - ~ - `-- bin - | - `-- my - - Two color schemes: - - # ~/.vifm/colors/for_bin - highlight Win cterm=none ctermfg=white ctermbg=red - highlight CurrLine cterm=none ctermfg=red ctermbg=black - - # ~/.vifm/colors/for_bin_my - highlight CurrLine cterm=none ctermfg=green ctermbg=black - - And these three commands in the vifmrc file: - - colorscheme Default - colorscheme for_bin ~/bin - colorscheme for_bin_my ~/bin/my - - File list will look in the following way for each level: - - - ~/ - Default color scheme - black background - cursor with blue background - - - ~/bin/ - mix of Default and for_bin color schemes - red background - cursor with black background and red foreground - - - ~/bin/my/ - mix of Default, for_bin and for_bin_my color schemes - red background - cursor with black background and green foreground - -Trash directory - vifm has support of trash directory, which is used as temporary storage - for deleted files or files that were cut. Using trash is controlled by - the 'trash' option, and exact path to the trash can be set with - 'trashdir' option. Trash directory in vifm differs from the system- - wide one by default, because of possible incompatibilities of storing - deleted files among different file managers. But one can set - 'trashdir' to "~/.local/share/Trash" to use a "standard" trash - directory. - - There are two scenarios of using trash in vifm: - - 1. As a place for storing files that were cut by "d" and may be - inserted to some other place in file system. - - 2. As a storage of files, that are deleted but not purged yet. - - The first scenario uses deletion ("d") operations to put files to trash - and put ("p") operations to restore files from trash directory. Note - that such operations move files to and from trash directory, which can - be long term operations in case of different partitions or remote - drives mounted locally. - - The second scenario uses deletion ("d") operations for moving files to - trash directory and :empty command-line command to purge all previously - deleted files. - - Deletion and put operations depend on registers, which can point to - files in trash directory. Normally, there are no nonexistent files in - registers, but vifm doesn't keep track of modifications under trash - directory, so one shouldn't expect value of registers to be absolutely - correct if trash directory was modified not by operation that are meant - for it. But this won't lead to any issues with operations, since they - ignore nonexistent files. - -Client-Server - vifm supports remote execution of command-line mode commands, remote - changing of directories and expression evaluation. This is possible - using --remote and --remote-expr command-line arguments. - - To execute a command remotely combine --remote argument with -c - or +. For example: - - vifm --remote -c 'cd /' - vifm --remote '+cd /' - - To change directory not using command-line mode commands one can - specify paths right after --remote argument, like this: - - vifm --remote / - vifm --remote ~ - vifm --remote /usr/bin /tmp - - Evaluating expression remotely might be useful to query information - about an instance, for example its location: - - vifm --remote-expr 'expand("%d")' - - If there are several running instances, the target can be specified - with --server-name option (otherwise, the first one lexicographically - is used): - - vifm --server-name work --remote ~/work/project - - List of names of running instances can be obtained via --server-list - option. Name of the current one is available via v:servername. - - - v:servername - server name of the running vifm instance. Empty if client- - server feature is disabled. - -Plugin - Plugin for using vifm in vim as a file selector. - - Commands: - - :EditVifm select a file or files to open in the current buffer. - :SplitVifm split buffer and select a file or files to open. - :VsplitVifm vertically split buffer and select a file or files to - open. - :DiffVifm select a file or files to compare to the current file - with - :vert diffsplit. - :TabVifm select a file or files to open in tabs. - - Each command accepts up to two arguments: left pane directory and right - pane directory. After arguments are checked, vifm process is spawned - in a special "file-picker" mode. To pick files just open them either - by pressing l, i or Enter keys, or by running :edit command. If no - files are selected, file under the cursor is opened, otherwise whole - selection is passed to the plugin and opened in vim. - - The plugin have only two settings. It's a string variable named - g:vifm_term to let user specify command to run GUI terminal. By - default it's equal to 'xterm -e'. And another string variable named - g:vifm_exec, which equals "vifm" by default and specifies path to - vifm's executable. To pass arguments to vifm use g:vifm_exec_args, - which is empty by default. - - To use the plugin copy the vifm.vim file to either the system wide - vim/plugin directory or into ~/.vim/plugin. - - If you would prefer not to use the plugin and it is in the system wide - plugin directory add - - let loaded_vifm=1 - - to your ~/.vimrc file. - -Reserved - The following command names are reserved and shouldn't be used for user - commands. - - g[lobal] - v[global] - -ENVIRONMENT - VIFM Points to main configuration directory (usually ~/.vifm/). - - MYVIFMRC - Points to main configuration file (usually ~/.vifm/vifmrc). - - These environment variables are valid inside vifm and also can be used - to configure it by setting some of them before running vifm. - - When $MYVIFMRC isn't set, it's made as $VIFM/vifmrc (exception for - Windows: vifmrc in the same directory as vifm.exe has higher priority - than $VIFM/vifmrc). - - See "Startup" section above for more details. - - VIFM_FUSE_FILE - On execution of external commands this variable is set to the - full path of file used to initiate FUSE mount of the closes - mount point from current pane directory up. It's not set when - outside FUSE mount point. When vifm is used inside terminal - multiplexer, it tries to set this variable as well (it doesn't - work this way on its own). - -SEE ALSO - vifm-convert-dircolors(1), vifm-pause(1) - - Website: https://vifm.info/ - Wiki: https://wiki.vifm.info/ - - Esperanto translation of the documentation by Sebastian Cyprych: - http://cyprych.neostrada.pl/tekstoj/komputiloj/vifm-help.eo.html - -AUTHOR - Vifm was written by ksteen - And currently is developed by xaizek - - - -vifm 0.10 November 11, 2018 VIFM(1) diff --git a/.config/vifm/vifminfo b/.config/vifm/vifminfo deleted file mode 100644 index c2e3d4f..0000000 --- a/.config/vifm/vifminfo +++ /dev/null @@ -1,920 +0,0 @@ -# You can edit this file by hand, but it's recommended not to do that. - -# Marks: -'H - /home/atc/downloads - Desperation-thatgamecompany-journey_art1600.jpg -1600976053 -'a - /usr/home/atc/pictures/franklin-cruise - DSC_0001.JPG -1603579572 -'b - /home/atc/bin/ - .. -1589372309 -'h - /home/atc/ - .. -1589372309 -'v - /usr/home/atc/downloads - resize:1600:900 -1596298552 - -# Bookmarks: - -# TUI: -al -q1 -v2 -ov -m-1 -l2 -r2 - -# Left window history (oldest to newest): -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - title_t00.mkv -9 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - title_t00.mkv -9 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - title_t00.mkv -9 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - title_t00.mkv -1 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - title_t00.mkv -1 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - title_t00.mkv -9 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 1 -1 -d/mnt/scratch/1 - Avatar: The Last Airbender Book Three: Fire Disc 3-004.mkv -8 -d/mnt/scratch - 2 -2 -d/mnt/scratch/2 - .. -0 -d/mnt/scratch - 3 -3 -d/mnt/scratch/3 - .. -0 -d/mnt/scratch - .. -0 -d/home/atc - downloads -4 -d/home/atc/downloads - amy-policy-changes.txt -5 -d/home/atc - pictures -8 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - entities -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities - .. -0 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - new_photo.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - dtos -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/dtos - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - .. -0 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - entities -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - entities -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - handlers.rs -8 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - repo -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - entities -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - repo -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - mod.rs -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - dtos -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/dtos - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - dtos -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/dtos - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - dtos -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/dtos - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - dtos -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - repo -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - entities -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo/entities - mod.rs -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - mod.rs -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - repo -3 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - entities -1 -d/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo/entities - photo_set_form.rs -3 -d/usr/home/atc/pictures/franklin-cruise - DSC_0001.JPG -1 -d - -# Right window history (oldest to newest): -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - assets -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/assets - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - components -2 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/components - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - models -3 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/models - category.js -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - views -6 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/views - About.vue -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - components -2 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/components - Footer.vue -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - assets -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/assets - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - models -3 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/models - category.js -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - router -4 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/router - index.js -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - store -5 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src/store - index.js -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/src - store -5 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak - public -2 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak/public - favicon.ico -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence.bak - public -2 -D/usr/home/atc/src/sites/com/theglassyladies - iridescence.bak -3 -D/usr/home/atc/src/sites/com - theglassyladies -2 -D/usr/home/atc/src/sites/com/theglassyladies - dichroism -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies - dichroism -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies - dichroism -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence - src -3 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence/src - components -3 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence/src/components - admin -1 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence/src/components/admin - .. -0 -D/mnt/scratch - .. -0 -D/mnt - scratch -1 -D/mnt/scratch - The Amazing World of War Machines (2017) s01e01.mkv -19 -D/mnt - scratch -1 -D/ - mnt -8 -D/mnt - scratch -1 -D/mnt/scratch - .. -0 -D/mnt - scratch -1 -D/ - mnt -8 -D/mnt - scratch -1 -D/home/atc - lego -5 -D/home/atc/lego - .. -0 -D/home/atc - pictures -7 -D/home/atc/pictures - .. -0 -D/home/atc - documents -3 -D/home/atc/documents - hudson -1 -D/home/atc/documents/hudson - HUDSON PARTS LIST.xlsx -1 -D/home/atc/documents - hudson -1 -D/home/atc/documents/hudson - HUDSON PARTS LIST.xlsx -1 -D/home/atc/documents - juiz -2 -D/home/atc/documents/juiz - .. -0 -D/home/atc/documents - juiz -2 -D/home/atc - documents -3 -D/home/atc/documents - juiz -2 -D/home/atc/documents/juiz - .. -0 -D/home/atc/documents - juiz -2 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence/src - components -3 -D/mnt/scratch - Be Cool (2005).mkv -16 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence - src -3 -D/usr/home/atc/src/sites/com/theglassyladies/iridescence/src - components -3 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - main.rs -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - test_uri.txt -4 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - test -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/test - data -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/test/data - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/test - mod.rs -2 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - tests -3 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/tests - integration_tests.rs -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - mod.rs -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - mod.rs -1 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -2 -D/mnt/scratch - 1 -1 -D/mnt/scratch/1 - .. -0 -D/mnt/scratch - 2 -2 -D/mnt/scratch/2 - .. -0 -D/mnt/scratch - 3 -3 -D/mnt/scratch/3 - .. -0 -D/mnt/scratch - s06e06.mkv -32 -D/mnt - scratch -1 -D/mnt/scratch - .. -0 -D/home/atc - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models - photo.rs -4 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - models -2 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - src -2 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src - repo -4 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism/src/repo - .. -0 -D/usr/home/atc/src/sites/com/theglassyladies/dichroism - -0 -D - -# Command line history (oldest to newest): -:!gimp preview -:!gimp preview* -:e ~/.config/vifm/vifmrc -:redraw -:delbmarks -:delete -:cd ~/src/sites/net/53hor/cobalt-site/posts/ -:cd ~ ~ -:!docx -:!doas move %f -:unzip -:!themer.sh Stoneship\ Lighthouse\ Alt.jpg -:!themer.sh -s Stoneship\ Lighthouse\ Alt.jpg -:cd ~/downloads/ -:!reset -:!doas rm -r xp -:mkdir iridescence -:cd ~/src/sites/com/theglassyladies/ -:copy! -:grep sass-loader -:grep -r sass-loader -:!rg sass-loader -:cd ~/pictures/ -:rename -:!mpv Avatar-\ The\ Last\ Airbender\ Book\ Three-\ Fire\ Disc\ 2_t04.mkv -:!bzcat -:!s -:!mpv f0060832_pid_0.m2ts -:` -:movw -:mo0ve -:!themer.sh -a clu.jpg -:!themer.sh -s . -:!themer.sh -s -:cd /tmp -:!toggle-screencast.sh -:!ffmpeg -i $f -vcodec h264 -:cd /zroot/calibre-test/ -:!chown atc:atc . -:cd .config/ -:cd .cal -:ls /var/ -:!rm * -:copyt -:!yarn add bulma -:copy -:!sxiv %f -:mkdir services -:!rg -:touch test -:touch Categoryjjj -:mkdir admin -:touch -:touch ProductEditList.vue -:e -:e NewProduct.vue -:e NewProduct -:e NewProductModal.vue -:!themer.sh -a . -:rm *jpg -:delete *jpg -:help -:help mark -:mkdir -:mkdir documents -:mkdir hudson -:mkdir juiz -:m -:e ~/src/sc -:mkdir test -:mkdir data -:mopve -:mkdir -:e .gitignore -:mkdir models -:reload -:cd ~/src/dotfiles/ -:touch -:touch product_image.rs -:!di -:!cargo check -:cd /mnt/scratch/ -:empty -:cd -:mkdir dtos -:e -:e . -:!gs -:mkdir repo -:move -:e mod.rs -:!git status -:!./serve_debug.sh -:!cargo run -:e src/handlers.rs -:!touch product_form.rs -:touch photo_set_form.rs -:!man sxiv -:Q -:q - -# Search history (oldest to newest): -/journ -/scre -/pic -/Subar -/wpg -/th -/font -/down -/age -/myst -/setu -/stud -/6 -/lxf -/mp4 -/atc.tar -/xcf -/now -/atc -/From -/Cus -/cast -/vid -/ups -/jpg -/lego -/leg -/doc -/sr -/Be -/image_a -/vif -/sc -/sch -/mod -/dow - -# Prompt history (oldest to newest): -ppreview -ppreview.xcf -pShowBillImage.pdf -pdominion-energy -presize.png -punix-system-i-know-this -piridescence.new -piridescence -piridescence.bak -pPearl Harbor (2001) -pVictory at Sea (1952) s01e13-16 -pIdentity (2003) -pThe Shawshank Redemption (1994) -pThe Green Mile (1999) -pMunich (2005) -pBad Boys II (2003) -pL -pVictory at Sea (1952) s01e13-e16 -pCrusade in the Pacific (1951) s01e05-e06 -pCrusade in the Pacific (1951) s01e07-e08 -pDirty Rotten Scoundrels (1988) -pAmerican Gangster (2007) -pMeet the Parents (2000) -pBreach (2007) -pRoad to Perdition (2002) -pMonster's Ball (2001) -ps03e09 -ps03e13 -ps03e16 -ps03e12 -ps03e01 -ps03e02 -ps03e03 -ps03e04 -ps03e05 -ps03e06 -ps03e07 -ps03e08 -pe17 -pAvatar The Last Airbender (2006) s03e17 -pe10 -pAvatar The Last Airbender (2006) s03e10 -pThe Whole Nine Yards (2000) -pPacific Heights (1990) -pThe Prince And The Pauper The Movie (2007) -pCharlie's Angels (2000) -pWe Were Soldiers (2002) -pMaid in Manhattan (200) -pMaid in Manhattan (2002) -pLethal Weapon 4 (1998) -pSnatch (2000) -pGangs of New York (2002) -pWhat Lies Beneath (2000) -pKiss the Girls (1997) -pKiss the Girls (1997).mkv -pThe Hunted (2003) -pSea of Love (1989) -pErin Brockovich (2000) -pLetters from Iwo Jima -pLetters from Iwo Jima (2006) -pclu -pflynn -pAdmin.vue -pindex.html.bak -papi -pProductCard -pProductSearch -pProductFilter -pProductList -pCategoryEditor.vue -pProductEditCard.vue -pProductEditCard -pIce Age The Meltdown (2006) -pTHE BATMAN TRAINING FOR POWER (split into 3 eps) -pA Fistful of Dollars (1964) -pHitch (2011) -pBe Cool (2005) -pWhite Noise (2005) -pGood Luck Chuck (2007) -pCalendar Girls (2003) -ptest_uri -pmod -ptests -pintegration_tests.rs -pintegration_tests -punit_test_data -pimg_data_uri -pserve_debug -pnew_product_images -pproduct_img.rs -pproduct_img -pimage -pnew_product_set -pnew_image -pnew_image_data -pnew_image_set -pimage_set -pHogan's Heroes (1965) s02e31 -- actually s03e05 -pproduct_repo -prepo - -# Local filter history (oldest to newest): - -# Registers: -""/home/atc/.local/share/vifm/Trash/000_product.rs - -# Directory stack (oldest to newest): - -# Trash content: -t/home/atc/.local/share/vifm/Trash/000_2 - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities/2 -t/home/atc/.local/share/vifm/Trash/000_models.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/dtos/models.rs -t/home/atc/.local/share/vifm/Trash/000_photo_repo.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/photo_repo.rs -t/home/atc/.local/share/vifm/Trash/000_new_photo.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models/new_photo.rs -t/home/atc/.local/share/vifm/Trash/000_new_photo_data.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models/new_photo_data.rs -t/home/atc/.local/share/vifm/Trash/000_new_photo_set.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/models/new_photo_set.rs -t/home/atc/.local/share/vifm/Trash/000_photo.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities/photo.rs -t/home/atc/.local/share/vifm/Trash/000_photo_set.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities/photo_set.rs -t/home/atc/.local/share/vifm/Trash/000_product.rs - /usr/home/atc/src/sites/com/theglassyladies/dichroism/src/entities/product.rs - -# State: -f -i1 -[.1 -[F -F -I1 -].1 -]F -s0 diff --git a/.config/vifm/vifmrc b/.config/vifm/vifmrc deleted file mode 100644 index 2275960..0000000 --- a/.config/vifm/vifmrc +++ /dev/null @@ -1,451 +0,0 @@ -" vim: filetype=vifm : -" Sample configuration file for vifm (last updated: 2 June, 2019) -" You can edit this file by hand. -" The " character at the beginning of a line comments out the line. -" Blank lines are ignored. -" The basic format for each item is shown with an example. -" -" **** Modified by ATC **** - -" ------------------------------------------------------------------------------ - -" Command used to edit files in various contexts. The default is vim. -" If you would like to use another vi clone such as Elvis or Vile -" you will need to change this setting. - -set vicmd=vim - -" Miller-style views - -set millerview - -" This makes vifm perform file operations on its own instead of relying on -" standard utilities like `cp`. While using `cp` and alike is a more universal -" solution, it's also much slower when processing large amounts of files and -" doesn't support progress measuring. - -set syscalls - -" Trash Directory -" The default is to move files that are deleted with dd or :d to -" the trash directory. If you change this you will not be able to move -" files by deleting them and then using p to put the file in the new location. -" I recommend not changing this until you are familiar with vifm. -" This probably shouldn't be an option. - -set trash - -" This is how many directories to store in the directory history. - -set history=100 - -" Automatically resolve symbolic links on l or Enter. - -set nofollowlinks - -" With this option turned on you can run partially entered commands with -" unambiguous beginning using :! (e.g. :!Te instead of :!Terminal or :!Te). - -" set fastrun - -" Natural sort of (version) numbers within text. - -set sortnumbers - -" Maximum number of changes that can be undone. - -set undolevels=100 - -" Use Vim's format of help file (has highlighting and "hyperlinks"). -" If you would rather use a plain text help file set novimhelp. - -set vimhelp - -" If you would like to run an executable file when you -" press return on the file name set this. - -set norunexec - -" Selected color scheme - -colorscheme Default - -" Format for displaying time in file list. For example: -" TIME_STAMP_FORMAT=%m/%d-%H:%M -" See man date or man strftime for details. - -set timefmt=%m/%d\ %H:%M - -" Show list of matches on tab completion in command-line mode - -set wildmenu - -" Display completions in a form of popup with descriptions of the matches - -set wildstyle=popup - -" Display suggestions in normal, visual and view modes for keys, marks and -" registers (at most 5 files). In other view, when available. - -set suggestoptions=normal,visual,view,otherpane,keys,marks,registers - -" Ignore case in search patterns unless it contains at least one uppercase -" letter - -set ignorecase -set smartcase - -" Don't highlight search results automatically - -set nohlsearch - -" Use increment searching (search while typing) -set incsearch - -" Try to leave some space from cursor to upper/lower border in lists - -set scrolloff=4 - -" Don't do too many requests to slow file systems - -if !has('win') - set slowfs=curlftpfs -endif - -" Set custom status line look - -set statusline=" Hint: %z%= %A %10u:%-7g %15s %20d " - -" ------------------------------------------------------------------------------ - -" :mark mark /full/directory/path [filename] - -mark b ~/bin/ -mark h ~/ - -" ------------------------------------------------------------------------------ - -" :com[mand][!] command_name action -" The following macros can be used in a command -" %a is replaced with the user arguments. -" %c the current file under the cursor. -" %C the current file under the cursor in the other directory. -" %f the current selected file, or files. -" %F the current selected file, or files in the other directory. -" %b same as %f %F. -" %d the current directory name. -" %D the other window directory name. -" %m run the command in a menu window - -command! df df -h %m 2> /dev/null -command! diff vim -d %f %F -command! zip zip -r %f.zip %f -command! run !! ./%f -command! make !!make %a -command! mkcd :mkdir %a | cd %a -command! vgrep vim "+grep %a" -command! reload :write | restart - -" ------------------------------------------------------------------------------ - -" The file type is for the default programs to be used with -" a file extension. -" :filetype pattern1,pattern2 defaultprogram,program2 -" :fileviewer pattern1,pattern2 consoleviewer -" The other programs for the file type can be accessed with the :file command -" The command macros %f, %F, %d, %F may be used in the commands. -" The %a macro is ignored. To use a % you must put %%. - -" For automated FUSE mounts, you must register an extension with :file[x]type -" in one of following formats: -" -" :filetype extensions FUSE_MOUNT|some_mount_command using %SOURCE_FILE and %DESTINATION_DIR variables -" %SOURCE_FILE and %DESTINATION_DIR are filled in by vifm at runtime. -" A sample line might look like this: -" :filetype *.zip,*.jar,*.war,*.ear FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR -" -" :filetype extensions FUSE_MOUNT2|some_mount_command using %PARAM and %DESTINATION_DIR variables -" %PARAM and %DESTINATION_DIR are filled in by vifm at runtime. -" A sample line might look like this: -" :filetype *.ssh FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR -" %PARAM value is filled from the first line of file (whole line). -" Example first line for SshMount filetype: root@127.0.0.1:/ -" -" You can also add %CLEAR if you want to clear screen before running FUSE -" program. - -" Pdf -filextype *.pdf mupdf %c %i & -fileviewer *.pdf mutool draw -F txt %c - -" Audio -filetype *.wav,*.mp3,*.flac,*.m4a,*.wma,*.ape,*.ac3,*.og[agx],*.spx,*.opus - \ mpv --no-video %f 2>/dev/null -fileviewer *.mp3 mp3info -fileviewer *.flac soxi - -" Video -filextype *.avi,*.mp4,*.wmv,*.dat,*.3gp,*.ogv,*.mkv,*.mpg,*.mpeg,*.vob, - \*.fl[icv],*.m2v,*.mov,*.webm,*.ts,*.mts,*.m4v,*.r[am],*.qt,*.divx, - \*.as[fx] - \ mpv %f 2>/dev/null & -fileviewer *.avi,*.mp4,*.wmv,*.dat,*.3gp,*.ogv,*.mkv,*.mpg,*.mpeg,*.vob, - \*.fl[icv],*.m2v,*.mov,*.webm,*.ts,*.mts,*.m4v,*.r[am],*.qt,*.divx, - \*.as[fx] - \ ffprobe -hide_banner -pretty %c 2>&1 - -" Web -filextype *.html,*.htm - \ firefox %f &, - -" Object -filetype *.o nm %f | less - -" Man page -filetype *.[1-8] man ./%c -fileviewer *.[1-8] man ./%c | col -b - -" Images -filextype *.bmp,*.jpg,*.jpeg,*.png,*.gif,*.xpm,*.webp - \ {View in sxiv} - \ imager.sh %f, -fileviewer *.bmp,*.png,*.gif,*.xpm - \ identify %f -fileviewer *.jpg,*.jpeg,*.tiff - \ exif %f - -" Image editing -filextype *.xcf - \ { Open in Gimp } - \ gimp %f 2>/dev/null & - -" MD5 -filetype *.md5 - \ {Check MD5 hash sum} - \ md5sum -c %f %S, - -" SHA1 -filetype *.sha1 - \ {Check SHA1 hash sum} - \ sha1sum -c %f %S, - -" SHA256 -filetype *.sha256 - \ {Check SHA256 hash sum} - \ sha256sum -c %f %S, - -" SHA512 -filetype *.sha512 - \ {Check SHA512 hash sum} - \ sha512sum -c %f %S, - -" GPG signature -filetype *.asc - \ {Check signature} - \ !!gpg --verify %c, - -" FuseZipMount -filetype *.zip,*.jar,*.war,*.ear,*.oxt,*.apkg - \ {Extract here} - \ unzip -o %c -fileviewer *.zip,*.jar,*.war,*.ear,*.oxt zip -sf %c - -" ArchiveMount -filetype *.tar,*.tar.bz2,*.tbz2,*.tgz,*.tar.gz,*.tar.xz,*.txz - \ {Mount with archivemount} - \ FUSE_MOUNT|archivemount %SOURCE_FILE %DESTINATION_DIR, -fileviewer *.tgz,*.tar.gz tar -tzf %c -fileviewer *.tar.bz2,*.tbz2 tar -tjf %c -fileviewer *.tar.txz,*.txz xz --list %c -fileviewer *.tar tar -tf %c - -" Rar2FsMount and rar archives -filetype *.rar - \ {Mount with rar2fs} - \ FUSE_MOUNT|rar2fs %SOURCE_FILE %DESTINATION_DIR, -fileviewer *.rar unrar v %c - -" IsoMount -filetype *.iso - \ {Mount with fuseiso} - \ FUSE_MOUNT|fuseiso %SOURCE_FILE %DESTINATION_DIR, - -" SshMount -filetype *.ssh - \ {Mount with sshfs} - \ FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR %FOREGROUND, - -" FtpMount -filetype *.ftp - \ {Mount with curlftpfs} - \ FUSE_MOUNT2|curlftpfs -o ftp_port=-,,disable_eprt %PARAM %DESTINATION_DIR %FOREGROUND, - -" Fuse7z and 7z archives -filetype *.7z - \ {Mount with fuse-7z} - \ FUSE_MOUNT|fuse-7z %SOURCE_FILE %DESTINATION_DIR, -fileviewer *.7z 7z l %c - -" Word Processing -filextype *.doc catdoc %c | vim - -filextype *.docx docx2txt %f | vim - -fileviewer *.doc catdoc %c -fileviewer *.docx docx2txt.pl %f - - -" Spreadsheets -filextype *.xls,*.xlsx,*.csv sc-im %f - -" LEGO -filextype *.lcd,*.ldr,*.mpd leocad %f & - -" TuDu files -filetype *.tudu tudu -f %c - -" Qt projects -filextype *.pro qtcreator %f & - -" Directories -filextype */ - \ {View in thunar} - \ Thunar %f &, - -" Syntax highlighting in preview -" -" Explicitly set highlight type for some extensions -" -" 256-color terminal -" fileviewer *.[ch],*.[ch]pp highlight -O xterm256 -s dante --syntax c %c -" fileviewer Makefile,Makefile.* highlight -O xterm256 -s dante --syntax make %c -" -" 16-color terminal -" fileviewer *.c,*.h highlight -O ansi -s dante %c -" -" Or leave it for automatic detection -" -" fileviewer *[^/] pygmentize -O style=monokai -f console256 -g - -" Displaying pictures in terminal -" -" fileviewer *.jpg,*.png shellpic %c - -" Open all other files with default system programs (you can also remove all -" :file[x]type commands above to ensure they don't interfere with system-wide -" settings). By default all unknown files are opened with 'vi[x]cmd' -" uncommenting one of lines below will result in ignoring 'vi[x]cmd' option -" for unknown file types. -" For *nix: -" filetype * xdg-open -" For OS X: -" filetype * open -" For Windows: -" filetype * start, explorer - -" ------------------------------------------------------------------------------ - -" What should be saved automatically between vifm sessions. Drop "savedirs" -" value if you don't want vifm to remember last visited directories for you. -set vifminfo=dhistory,savedirs,chistory,state,tui,shistory, - \phistory,fhistory,dirstack,registers,bookmarks,bmarks - -" ------------------------------------------------------------------------------ - -" Examples of configuring both panels - -" Customize view columns a bit (enable ellipsis for truncated file names) -" -" set viewcolumns=-{name}..,6{}. - -" Filter-out build and temporary files -" -" filter! /^.*\.(lo|o|d|class|py[co])$|.*~$/ - -" ------------------------------------------------------------------------------ - -" Sample mappings - -" Start shell in current directory -nnoremap s :shell - -" Display sorting dialog -nnoremap S :sort - -" Toggle visibility of preview window -nnoremap w :view -vnoremap w :viewgv - -" Open file in existing instance of gvim -nnoremap o :!gvim --remote-tab-silent %f -" Open file in new instance of gvim -nnoremap O :!gvim %f - -" Open file in the background using its default program -nnoremap gb :file &l - -" Interaction with system clipboard -if has('win') - " Yank current directory path to Windows clipboard with forward slashes - nnoremap yp :!echo %"d:gs!\!/! %i | clip - " Yank path to current file to Windows clipboard with forward slashes - nnoremap yf :!echo %"c:gs!\!/! %i | clip -elseif executable('xclip') - " Yank current directory path into the clipboard - nnoremap yd :!echo %d | xclip %i - " Yank current file path into the clipboard - nnoremap yf :!echo %c:p | xclip %i -elseif executable('xsel') - " Yank current directory path into primary and selection clipboards - nnoremap yd :!echo -n %d | xsel --input --primary %i && - \ echo -n %d | xsel --clipboard --input %i - " Yank current file path into into primary and selection clipboards - nnoremap yf :!echo -n %c:p | xsel --input --primary %i && - \ echo -n %c:p | xsel --clipboard --input %i -endif - -" Mappings for faster renaming -nnoremap I cw -nnoremap cc cw -nnoremap A cw - -" Open console in current directory -nnoremap ,t :!xterm & - -" Open editor to edit vifmrc and apply settings after returning to vifm -nnoremap ,c :write | edit $MYVIFMRC | restart -" Open gvim to edit vifmrc -nnoremap ,C :!gvim --remote-tab-silent $MYVIFMRC & - -" Toggle wrap setting on ,w key -nnoremap ,w :set wrap! - -" Example of standard two-panel file managers mappings -nnoremap :!less %f -nnoremap :edit -nnoremap :copy -nnoremap :move -nnoremap :mkdir -nnoremap :delete - -" ------------------------------------------------------------------------------ - -" Various customization examples - -" Use ag (the silver searcher) instead of grep -" -" set grepprg='ag --line-numbers %i %a %s' - -" Add additional place to look for executables -" -" let $PATH = $HOME.'/bin/fuse:'.$PATH - -" Block particular shortcut -" -" nnoremap - -" Export IPC name of current instance as environment variable and use it to -" communicate with the instance later. -" -" It can be used in some shell script that gets run from inside vifm, for -" example, like this: -" vifm --server-name "$VIFM_SERVER_NAME" --remote +"cd '$PWD'" -" -" let $VIFM_SERVER_NAME = v:servername diff --git a/.config/wpg/sequences b/.config/wpg/sequences index 6d2716a..3385133 100644 --- a/.config/wpg/sequences +++ b/.config/wpg/sequences @@ -1 +1 @@ -]4;0;#0c0c0e\]4;1;#A0999F\]4;2;#738738\]4;3;#AE9545\]4;4;#676995\]4;5;#8C75A7\]4;6;#6E909F\]4;7;#d4cddc\]4;8;#222229\]4;9;#e4b2dd\]4;10;#9bbb3c\]4;11;#f2c949\]4;12;#7579d2\]4;13;#b485eb\]4;14;#7dc1e0\]4;15;#fef5ff\]10;#fef5ff\]11;[90]#0c0c0e\]12;#fef5ff\]13;#fef5ff\]17;#fef5ff\]19;#0c0c0e\]4;232;#0c0c0e\]4;256;#fef5ff\]708;[90]#0c0c0e\ \ No newline at end of file +]4;0;#0a0b0a\]4;1;#8B755C\]4;2;#778655\]4;3;#B49E5C\]4;4;#44648F\]4;5;#9C9264\]4;6;#728EAE\]4;7;#c5c4c4\]4;8;#212521\]4;9;#c39968\]4;10;#a0bc60\]4;11;#fbd665\]4;12;#4a7fc7\]4;13;#dbc871\]4;14;#81b7f4\]4;15;#fffefe\]10;#fffefe\]11;[90]#0a0b0a\]12;#fffefe\]13;#fffefe\]17;#fffefe\]19;#0a0b0a\]4;232;#0a0b0a\]4;256;#fffefe\]708;[90]#0a0b0a\ \ No newline at end of file diff --git a/.config/wpg/templates/i3.base b/.config/wpg/templates/i3.base index 79f0238..062a215 100644 --- a/.config/wpg/templates/i3.base +++ b/.config/wpg/templates/i3.base @@ -3,10 +3,16 @@ ## Please see https://i3wm.org/docs/userguide.html for a complete reference! ## GENERAL +default_border pixel 2 +default_floating_border pixel 2 font pango:sans-serif 13 +force_display_urgency_hint 500 ms +hide_edge_borders smart set $locker xautolock -locknow set $mod Mod1 set $sigaudio pkill -75 i3blocks +title_align center +workspace_auto_back_and_forth yes ## WORKSPACES set $ws1 "1:󰖟" @@ -45,13 +51,6 @@ bindsym $mod+shift+8 move container to workspace $ws8 bindsym $mod+shift+9 move container to workspace $ws9 bindsym $mod+shift+0 move container to workspace $ws10 -## BORDERS -default_border pixel 2 -default_floating_border pixel 2 -hide_edge_borders smart -title_align center -workspace_auto_back_and_forth yes - ## COLORS # base colors -- set by WPG set $coloract "{active}" @@ -119,8 +118,8 @@ bindsym $mod+space focus mode_toggle bindsym $mod+shift+F1 exec firefox /usr/local/share/doc/freebsd/handbook/book.html bindsym $mod+F2 exec firefox bindsym $mod+shift+F2 exec firefox --private-window -bindsym $mod+F3 exec alacritty -e zsh -i -c "vifm ~ ~/downloads" -bindsym $mod+F4 exec alacritty -t "Reading Email" -e zsh -i -c "mutt" && mbsync -c ~/.config/mbsync/mbsyncrc -a && pkill -77 i3blocks +#bindsym $mod+F3 exec alacritty -e zsh -i -c "vifm ~ ~/downloads" +bindsym $mod+F4 exec alacritty -t "Reading Email" -e sh -i -c 'OLDPWD="$PWD" && cd ~/downloads/ && mutt && cd "$OLDPWD"' && mbsync -c ~/.config/mbsync/mbsyncrc -a && pkill -77 i3blocks bindsym $mod+F5 exec alacritty -t "Reading News" -e zsh -i -c newsboat && pkill -78 i3blocks bindsym $mod+F6 exec --no-startup-id url_handler.sh bindsym $mod+F7 exec --no-startup-id dict.sh -- cgit v1.2.3