diff options
Diffstat (limited to 'posts')
| -rw-r--r-- | posts/2021-10-01-shroud-your-rad-for-an-ice-cold-hudson.php | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/posts/2021-10-01-shroud-your-rad-for-an-ice-cold-hudson.php b/posts/2021-10-01-shroud-your-rad-for-an-ice-cold-hudson.php index d546554..35a226f 100644 --- a/posts/2021-10-01-shroud-your-rad-for-an-ice-cold-hudson.php +++ b/posts/2021-10-01-shroud-your-rad-for-an-ice-cold-hudson.php @@ -39,7 +39,7 @@ include($_SERVER['DOCUMENT_ROOT'] . '/includes/head.php'); </p> <p> - Second, we decreased the overall depth of the rectangular shroud body. We did this pretty drastically, about an inch, to allow for an AC condenser in front of the Dodge rad. The depth is only important to getting the circular shroud ring completely around the fan blades without the fan sticking too far forward into the rectangular body of the shroud, or so far out that it's completely outside of the shroud. See the picture below for a good idea of the shroud depth in relation to fan insertion. + Second, we decreased the overall depth of the rectangular shroud body. We did this pretty drastically, about an inch, to allow for an AC condenser in front of the Dodge rad. The depth is only important to getting the circular shroud ring completely around the fan blades without the fan sticking too far forward into the rectangular body of the shroud, or so far out that it's completely outside of the shroud. See the picture below for a good idea of the shroud depth in relation to fan insertion. To make sure the fan blades were absolutely where we wanted them to be, we added a fan spacer on the water pump pulley. </p> <p> |