Init

1 files changed, 141 insertions, 0 deletions

diff --git a/.config/mpv/mpv.conf b/.config/mpv/mpv.conf
new file mode 100644
index 0000000..6033687
--- /dev/null
+++ b/.config/mpv/mpv.conf
@@ -0,0 +1,141 @@
+#
+# Example mpv configuration file
+#
+# Warning:
+#
+# The commented example options usually do _not_ set the default values. Call
+# mpv with --list-options to see the default values for most options. There is
+# no builtin or example mpv.conf with all the defaults.
+#
+#
+# Configuration files are read system-wide from /usr/local/etc/mpv.conf
+# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
+# system-wide settings, all of which are overridden by the command line.
+#
+# Configuration file settings and the command line options use the same
+# underlying mechanisms. Most options can be put into the configuration file
+# by dropping the preceding '--'. See the man page for a complete list of
+# options.
+#
+# Lines starting with '#' are comments and are ignored.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+#
+# Profiles should be placed at the bottom of the configuration file to ensure
+# that settings wanted as defaults are not restricted to specific profiles.
+
+## ATC
+ytdl-format=bestvideo[height<=?1080]+bestaudio/best
+
+##################
+# video settings #
+##################
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# force starting with centered window
+#geometry=50%:50%
+
+# don't allow a new window to have a size larger than 90% of the screen size
+#autofit-larger=90%x90%
+
+# Do not close the window on exit.
+#keep-open=yes
+
+# Do not wait with showing the video window until it has loaded. (This will
+# resize the window once video is loaded. Also always shows a window with
+# audio.)
+#force-window=immediate
+
+# Disable the On Screen Controller (OSC).
+#osc=no
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+# Specify high quality video rendering preset (for --vo=gpu only)
+# Can cause performance problems with some drivers and GPUs.
+#profile=gpu-hq
+
+# Force video to lock on the display's refresh rate, and change video and audio
+# speed to some degree to ensure synchronous playback - can cause problems
+# with some drivers and desktop environments.
+video-sync=display-resample
+
+# Enable hardware decoding if available. Often, this does not work with all
+# video outputs, but should work well with default settings on most systems.
+# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
+# may or may not help.
+#hwdec=auto
+
+##################
+# audio settings #
+##################
+
+# Specify default audio device. You can list devices with: --audio-device=help
+# The option takes the device string (the stuff between the '...').
+#audio-device=alsa/default
+
+# Do not filter audio to keep pitch when changing playback speed.
+#audio-pitch-correction=no
+
+# Output 5.1 audio natively, and upmix/downmix audio with a different format.
+#audio-channels=5.1
+# Disable any automatic remix, _if_ the audio output accepts the audio format.
+# of the currently played file. See caveats mentioned in the manpage.
+# (The default is "auto-safe", see manpage.)
+#audio-channels=auto
+
+##################
+# other settings #
+##################
+
+# Pretend to be a web browser. Might fix playback with some streaming sites,
+# but also will break with shoutcast streams.
+#user-agent="Mozilla/5.0"
+
+# cache settings
+#
+# Use a large seekable RAM cache even for local input.
+#cache=yes
+#
+# Use extra large RAM cache (needs cache=yes to make it useful).
+#demuxer-max-bytes=500M
+#demuxer-max-back-bytes=100M
+#
+# Disable the behavior that the player will pause if the cache goes below a
+# certain fill size.
+#cache-pause=no
+#
+# Store cache payload on the hard disk instead of in RAM. (This may negatively
+# impact performance unless used for slow input such as network.)
+#cache-dir=~/.cache/
+#cache-on-disk=yes
+
+# Display English subtitles if available.
+#slang=en
+
+# Play Finnish audio if available, fall back to English otherwise.
+#alang=fi,en
+
+# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
+# If the file seems to be valid UTF-8, prefer UTF-8.
+# (You can add '+' in front of the codepage to force it.)
+#sub-codepage=cp1256
+
+# You can also include other configuration files.
+#include=/path/to/the/file/you/want/to/include
+
+############
+# Profiles #
+############
+
+# The options declared as part of profiles override global default settings,
+# but only take effect when the profile is active.
+
+# The following profile can be enabled on the command line with: --profile=eye-cancer
+
+#[eye-cancer]
+#sharpen=5