diff options
| author | Adam T. Carpenter <atc@53hor.net> | 2020-11-24 08:11:46 -0500 |
|---|---|---|
| committer | Adam T. Carpenter <atc@53hor.net> | 2020-11-24 08:11:46 -0500 |
| commit | 208ecf206edaa6426128d9999563af5c3e18fadd (patch) | |
| tree | a2cbb6d09a5a6a5caa0f6a7ac99826f30283b775 /.config/mutt | |
| download | dotfiles-208ecf206edaa6426128d9999563af5c3e18fadd.tar.xz dotfiles-208ecf206edaa6426128d9999563af5c3e18fadd.zip | |
Init
Diffstat (limited to '.config/mutt')
| -rw-r--r-- | .config/mutt/mailcap | 1 | ||||
| -rw-r--r-- | .config/mutt/muttrc | 6379 |
2 files changed, 6380 insertions, 0 deletions
diff --git a/.config/mutt/mailcap b/.config/mutt/mailcap new file mode 100644 index 0000000..8603537 --- /dev/null +++ b/.config/mutt/mailcap @@ -0,0 +1 @@ +text/html; w3m -I %{charset} -T text/html; copiousoutput; diff --git a/.config/mutt/muttrc b/.config/mutt/muttrc new file mode 100644 index 0000000..d732932 --- /dev/null +++ b/.config/mutt/muttrc @@ -0,0 +1,6379 @@ +# +# System configuration file for Mutt +# + +#mailboxes = +INBOX +auto_view text/html +alternative_order text/plain text/html + +# Default list of header fields to weed when displaying. +# Ignore all lines by default... +ignore * + +# ... then allow these through. +unignore from: subject to cc date x-mailer x-url user-agent + +# Display the fields in this order +hdr_order date from to cc subject + +# imitate the old search-body function +macro index \eb "<search>~b " "search in message bodies" + +# simulate the old url menu +macro index,pager,attach,compose \cb "\ +<enter-command> set my_pipe_decode=\$pipe_decode pipe_decode<Enter>\ +<pipe-message> urlview<Enter>\ +<enter-command> set pipe_decode=\$my_pipe_decode; unset my_pipe_decode<Enter>" \ +"call urlview to extract URLs out of a message" + +# Show documentation when pressing F1 +macro generic,pager <F1> "<shell-escape> less /usr/local/share/doc/mutt/manual.txt<Enter>" "show Mutt documentation" + +# show the incoming mailboxes list (just like "mutt -y") and back when pressing "y" +# note: these macros have been subsumed by the <browse-mailboxes> function. +# macro index y "<change-folder>?<toggle-mailboxes>" "show incoming mailboxes list" +# macro pager y "<exit><change-folder>?<toggle-mailboxes>" "show incoming mailboxes list" +bind browser y exit + +# Handler for gzip compressed mailboxes +# open-hook '\.gz$' "gzip -cd '%f' > '%t'" +# close-hook '\.gz$' "gzip -c '%t' > '%f'" +# append-hook '\.gz$' "gzip -c '%t' >> '%f'" + +# If Mutt is unable to determine your site's domain name correctly, you can +# set the default here. +# +# set hostname=cs.hmc.edu + +# If your sendmail supports the -B8BITMIME flag, enable the following +# +# set use_8bitmime + +# Use mime.types to look up handlers for application/octet-stream. Can +# be undone with unmime_lookup. +mime_lookup application/octet-stream + +## +## *** DEFAULT SETTINGS FOR THE ATTACHMENTS PATCH *** +## + +## +## Please see the manual (section "attachments") for detailed +## documentation of the "attachments" command. +## +## Removing a pattern from a list removes that pattern literally. It +## does not remove any type matching the pattern. +## +## attachments +A */.* +## attachments +A image/jpeg +## unattachments +A */.* +## +## This leaves "attached" image/jpeg files on the allowed attachments +## list. It does not remove all items, as you might expect, because the +## second */.* is not a matching expression at this time. +## +## Remember: "unattachments" only undoes what "attachments" has done! +## It does not trigger any matching on actual messages. + +## Qualify any MIME part with an "attachment" disposition, EXCEPT for +## text/x-vcard and application/pgp parts. (PGP parts are already known +## to mutt, and can be searched for with ~g, ~G, and ~k.) +## +## I've added x-pkcs7 to this, since it functions (for S/MIME) +## analogously to PGP signature attachments. S/MIME isn't supported +## in a stock mutt build, but we can still treat it specially here. +## +attachments +A */.* +attachments -A text/x-vcard application/pgp.* +attachments -A application/x-pkcs7-.* + +## Discount all MIME parts with an "inline" disposition, unless they're +## text/plain. (Why inline a text/plain part unless it's external to the +## message flow?) +## +attachments +I text/plain + +## These two lines make Mutt qualify MIME containers. (So, for example, +## a message/rfc822 forward will count as an attachment.) The first +## line is unnecessary if you already have "attach-allow */.*", of +## course. These are off by default! The MIME elements contained +## within a message/* or multipart/* are still examined, even if the +## containers themselves don't qualify. +## +#attachments +A message/.* multipart/.* +#attachments +I message/.* multipart/.* + +## You probably don't really care to know about deleted attachments. +attachments -A message/external-body +attachments -I message/external-body + +## +## More settings +## + + +# set abort_noattach=no +# +# Name: abort_noattach +# Type: quadoption +# Default: no +# +# +# When the body of the message matches $abort_noattach_regexp and +# there are no attachments, this quadoption controls whether to +# abort sending the message. +# +# +# set abort_noattach_regexp="attach" +# +# Name: abort_noattach_regexp +# Type: regular expression +# Default: "attach" +# +# +# Specifies a regular expression to match against the body of the +# message, to determine if an attachment was mentioned but +# mistakenly forgotten. If it matches, $abort_noattach will be +# consulted to determine if message sending will be aborted. +# +# Like other regular expressions in Mutt, the search is case +# sensitive if the pattern contains at least one upper case letter, +# and case insensitive otherwise. +# +# +# set abort_nosubject=ask-yes +# +# Name: abort_nosubject +# Type: quadoption +# Default: ask-yes +# +# +# If set to yes, when composing messages and no subject is given +# at the subject prompt, composition will be aborted. If set to +# no, composing messages with no subject given at the subject +# prompt will never be aborted. +# +# +set abort_unmodified=yes +# +# Name: abort_unmodified +# Type: quadoption +# Default: yes +# +# +# If set to yes, composition will automatically abort after +# editing the message body if no changes are made to the file (this +# check only happens after the first edit of the file). When set +# to no, composition will never be aborted. +# +# +# set alias_file="~/.muttrc" +# +# Name: alias_file +# Type: path +# Default: "~/.muttrc" +# +# +# The default file in which to save aliases created by the +# <create-alias> function. Entries added to this file are +# encoded in the character set specified by $config_charset if it +# is set or the current character set otherwise. +# +# Note: Mutt will not automatically source this file; you must +# explicitly use the ``source'' command for it to be executed in case +# this option points to a dedicated alias file. +# +# The default for this option is the currently used muttrc file, or +# ``~/.muttrc'' if no user muttrc was found. +# +# +# set alias_format="%4n %2f %t %-10a %r" +# +# Name: alias_format +# Type: string +# Default: "%4n %2f %t %-10a %r" +# +# +# Specifies the format of the data displayed for the ``alias'' menu. The +# following printf(3)-style sequences are available: +# %a alias name +# %f flags - currently, a ``d'' for an alias marked for deletion +# %n index number +# %r address which alias expands to +# %t character which indicates if the alias is tagged for inclusion +# +# +# set allow_8bit=yes +# +# Name: allow_8bit +# Type: boolean +# Default: yes +# +# +# Controls whether 8-bit data is converted to 7-bit using either Quoted- +# Printable or Base64 encoding when sending mail. +# +# +# set allow_ansi=no +# +# Name: allow_ansi +# Type: boolean +# Default: no +# +# +# Controls whether ANSI color codes in messages (and color tags in +# rich text messages) are to be interpreted. +# Messages containing these codes are rare, but if this option is set, +# their text will be colored accordingly. Note that this may override +# your color choices, and even present a security problem, since a +# message could include a line like +# [-- PGP output follows ... +# +# and give it the same color as your attachment color (see also +# $crypt_timestamp). +# +# +# set arrow_cursor=no +# +# Name: arrow_cursor +# Type: boolean +# Default: no +# +# +# When set, an arrow (``->'') will be used to indicate the current entry +# in menus instead of highlighting the whole line. On slow network or modem +# links this will make response faster because there is less that has to +# be redrawn on the screen when moving to the next or previous entries +# in the menu. +# +# +# set ascii_chars=no +# +# Name: ascii_chars +# Type: boolean +# Default: no +# +# +# If set, Mutt will use plain ASCII characters when displaying thread +# and attachment trees, instead of the default ACS characters. +# +# +# set askbcc=no +# +# Name: askbcc +# Type: boolean +# Default: no +# +# +# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients +# before editing an outgoing message. +# +# +# set askcc=no +# +# Name: askcc +# Type: boolean +# Default: no +# +# +# If set, Mutt will prompt you for carbon-copy (Cc) recipients before +# editing the body of an outgoing message. +# +# +# set assumed_charset="" +# +# Name: assumed_charset +# Type: string +# Default: "" +# +# +# This variable is a colon-separated list of character encoding +# schemes for messages without character encoding indication. +# Header field values and message body content without character encoding +# indication would be assumed that they are written in one of this list. +# By default, all the header fields and message body without any charset +# indication are assumed to be in ``us-ascii''. +# +# For example, Japanese users might prefer this: +# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" +# +# However, only the first content is valid for the message body. +# +# +# set attach_charset="" +# +# Name: attach_charset +# Type: string +# Default: "" +# +# +# This variable is a colon-separated list of character encoding +# schemes for text file attachments. Mutt uses this setting to guess +# which encoding files being attached are encoded in to convert them to +# a proper character set given in $send_charset. +# +# If unset, the value of $charset will be used instead. +# For example, the following configuration would work for Japanese +# text handling: +# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" +# +# Note: for Japanese users, ``iso-2022-*'' must be put at the head +# of the value as shown above if included. +# +# +# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " +# +# Name: attach_format +# Type: string +# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " +# +# +# This variable describes the format of the ``attachment'' menu. The +# following printf(3)-style sequences are understood: +# %C charset +# %c requires charset conversion (``n'' or ``c'') +# %D deleted flag +# %d description (if none, falls back to %F) +# %e MIME content-transfer-encoding +# %F filename in content-disposition header (if none, falls back to %f) +# %f filename +# %I disposition (``I'' for inline, ``A'' for attachment) +# %m major MIME type +# %M MIME subtype +# %n attachment number +# %Q ``Q'', if MIME part qualifies for attachment counting +# %s size (see formatstrings-size) +# %t tagged flag +# %T graphic tree characters +# %u unlink (=to delete) flag +# %X number of qualifying MIME parts in this part and its children +# (please see the ``attachments'' section for possible speed effects) +# %>X right justify the rest of the string and pad with character ``X'' +# %|X pad to the end of the line with character ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# For an explanation of ``soft-fill'', see the $index_format documentation. +# +# +# set attach_sep="\n" +# +# Name: attach_sep +# Type: string +# Default: "\n" +# +# +# The separator to add between attachments when operating (saving, +# printing, piping, etc) on a list of tagged attachments. +# +# +# set attach_split=yes +# +# Name: attach_split +# Type: boolean +# Default: yes +# +# +# If this variable is unset, when operating (saving, printing, piping, +# etc) on a list of tagged attachments, Mutt will concatenate the +# attachments and will operate on them as a single attachment. The +# $attach_sep separator is added after each attachment. When set, +# Mutt will operate on the attachments one by one. +# +# +# set attribution="On %d, %n wrote:" +# +# Name: attribution +# Type: string +# Default: "On %d, %n wrote:" +# +# +# This is the string that will precede a message which has been included +# in a reply. For a full listing of defined printf(3)-like sequences see +# the section on $index_format. +# +# +# set attribution_locale="" +# +# Name: attribution_locale +# Type: string +# Default: "" +# +# +# The locale used by strftime(3) to format dates in the +# attribution string. Legal values are the strings your system +# accepts for the locale environment variable $LC_TIME. +# +# This variable is to allow the attribution date format to be +# customized by recipient or folder using hooks. By default, Mutt +# will use your locale environment, so there is no need to set +# this except to override that default. +# +# +# set auto_subscribe=no +# +# Name: auto_subscribe +# Type: boolean +# Default: no +# +# +# When set, Mutt assumes the presence of a List-Post header +# means the recipient is subscribed to the list. Unless the mailing list +# is in the ``unsubscribe'' or ``unlist'' lists, it will be added +# to the ``subscribe'' list. Parsing and checking these things slows +# header reading down, so this option is disabled by default. +# +# +# set auto_tag=no +# +# Name: auto_tag +# Type: boolean +# Default: no +# +# +# When set, functions in the index menu which affect a message +# will be applied to all tagged messages (if there are any). When +# unset, you must first use the <tag-prefix> function (bound to ``;'' +# by default) to make the next function apply to all tagged messages. +# +# +# set autocrypt=no +# +# Name: autocrypt +# Type: boolean +# Default: no +# +# +# When set, enables autocrypt, which provides +# passive encryption protection with keys exchanged via headers. +# See ``autocryptdoc'' for more details. +# (Autocrypt only) +# +# +# set autocrypt_acct_format="%4n %-30a %20p %10s" +# +# Name: autocrypt_acct_format +# Type: string +# Default: "%4n %-30a %20p %10s" +# +# +# This variable describes the format of the ``autocrypt account'' menu. +# The following printf(3)-style sequences are understood +# %a email address +# %k gpg keyid +# %n current entry number +# %p prefer-encrypt flag +# %s status flag (active/inactive) +# +# +# (Autocrypt only) +# +# +# set autocrypt_dir="~/.mutt/autocrypt" +# +# Name: autocrypt_dir +# Type: path +# Default: "~/.mutt/autocrypt" +# +# +# This variable sets where autocrypt files are stored, including the GPG +# keyring and sqlite database. See ``autocryptdoc'' for more details. +# (Autocrypt only) +# +# +# set autocrypt_reply=yes +# +# Name: autocrypt_reply +# Type: boolean +# Default: yes +# +# +# When set, replying to an autocrypt email automatically +# enables autocrypt in the reply. You may want to unset this if you're using +# the same key for autocrypt as normal web-of-trust, so that autocrypt +# isn't forced on for all encrypted replies. +# (Autocrypt only) +# +# +# set autoedit=no +# +# Name: autoedit +# Type: boolean +# Default: no +# +# +# When set along with $edit_headers, Mutt will skip the initial +# send-menu (prompting for subject and recipients) and allow you to +# immediately begin editing the body of your +# message. The send-menu may still be accessed once you have finished +# editing the body of your message. +# +# Note: when this option is set, you cannot use send-hooks that depend +# on the recipients when composing a new (non-reply) message, as the initial +# list of recipients is empty. +# +# Also see $fast_reply. +# +# +# set background_edit=no +# +# Name: background_edit +# Type: boolean +# Default: no +# +# +# When set, Mutt will run $editor in the background during +# message composition. A landing page will display, waiting for +# the $editor to exit. The landing page may be exited, allowing +# perusal of the mailbox, or even for other messages to be +# composed. Backgrounded sessions may be returned to via the +# <background-compose-menu> function. +# +# For background editing to work properly, $editor must be set to +# an editor that does not try to use the Mutt terminal: for example +# a graphical editor, or a script launching (and waiting for) the +# editor in another Gnu Screen window. +# +# For more details, see ``bgedit'' ("Background Editing" in the manual). +# +# +# set background_confirm_quit=yes +# +# Name: background_confirm_quit +# Type: boolean +# Default: yes +# +# +# When set, if there are any background edit sessions, you +# will be prompted to confirm exiting Mutt, in addition to the +# $quit prompt. +# +# +# set background_format="%10S %7p %s" +# +# Name: background_format +# Type: string +# Default: "%10S %7p %s" +# +# +# This variable describes the format of the ``background compose'' +# menu. The following printf(3)-style sequences are +# understood: +# %i parent message id (for replies and forwarded messages) +# %n the running number on the menu +# %p pid of the $editor process +# %r comma separated list of ``To:'' recipients +# %R comma separated list of ``Cc:'' recipients +# %s subject of the message +# %S status of the $editor process: running/finished +# +# +# set beep=yes +# +# Name: beep +# Type: boolean +# Default: yes +# +# +# When this variable is set, mutt will beep when an error occurs. +# +# +# set beep_new=no +# +# Name: beep_new +# Type: boolean +# Default: no +# +# +# When this variable is set, mutt will beep whenever it prints a message +# notifying you of new mail. This is independent of the setting of the +# $beep variable. +# +# +# set bounce=ask-yes +# +# Name: bounce +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether you will be asked to confirm bouncing messages. +# If set to yes you don't get asked if you want to bounce a +# message. Setting this variable to no is not generally useful, +# and thus not recommended, because you are unable to bounce messages. +# +# +# set bounce_delivered=yes +# +# Name: bounce_delivered +# Type: boolean +# Default: yes +# +# +# When this variable is set, mutt will include Delivered-To headers when +# bouncing messages. Postfix users may wish to unset this variable. +# +# +# set braille_friendly=no +# +# Name: braille_friendly +# Type: boolean +# Default: no +# +# +# When this variable is set, mutt will place the cursor at the beginning +# of the current line in menus, even when the $arrow_cursor variable +# is unset, making it easier for blind persons using Braille displays to +# follow these menus. The option is unset by default because many +# visual terminals don't permit making the cursor invisible. +# +# +# set browser_abbreviate_mailboxes=yes +# +# Name: browser_abbreviate_mailboxes +# Type: boolean +# Default: yes +# +# +# When this variable is set, mutt will abbreviate mailbox +# names in the browser mailbox list, using '~' and '=' +# shortcuts. +# +# The default "alpha" setting of $sort_browser uses +# locale-based sorting (using strcoll(3)), which ignores some +# punctuation. This can lead to some situations where the order +# doesn't make intuitive sense. In those cases, it may be +# desirable to unset this variable. +# +# +# set browser_sticky_cursor=yes +# +# Name: browser_sticky_cursor +# Type: boolean +# Default: yes +# +# +# When this variable is set, the browser will attempt to keep +# the cursor on the same mailbox when performing various functions. +# These include moving up a directory, toggling between mailboxes +# and directory listing, creating/renaming a mailbox, toggling +# subscribed mailboxes, and entering a new mask. +# +# +# set certificate_file="~/.mutt_certificates" +# +# Name: certificate_file +# Type: path +# Default: "~/.mutt_certificates" +# +# +# This variable specifies the file where the certificates you trust +# are saved. When an unknown certificate is encountered, you are asked +# if you accept it or not. If you accept it, the certificate can also +# be saved in this file and further connections are automatically +# accepted. +# +# You can also manually add CA certificates in this file. Any server +# certificate that is signed with one of these CA certificates is +# also automatically accepted. +# +# Example: +# set certificate_file=~/.mutt/certificates +# +# +# set change_folder_next=no +# +# Name: change_folder_next +# Type: boolean +# Default: no +# +# +# When this variable is set, the <change-folder> function +# mailbox suggestion will start at the next folder in your ``mailboxes'' +# list, instead of starting at the first folder in the list. +# +# +# set charset="" +# +# Name: charset +# Type: string +# Default: "" +# +# +# Character set your terminal uses to display and enter textual data. +# It is also the fallback for $send_charset. +# +# Upon startup Mutt tries to derive this value from environment variables +# such as $LC_CTYPE or $LANG. +# +# Note: It should only be set in case Mutt isn't able to determine the +# character set used correctly. +# +# +# set check_mbox_size=no +# +# Name: check_mbox_size +# Type: boolean +# Default: no +# +# +# When this variable is set, mutt will use file size attribute instead of +# access time when checking for new mail in mbox and mmdf folders. +# +# This variable is unset by default and should only be enabled when +# new mail detection for these folder types is unreliable or doesn't work. +# +# Note that enabling this variable should happen before any ``mailboxes'' +# directives occur in configuration files regarding mbox or mmdf folders +# because mutt needs to determine the initial new mail status of such a +# mailbox by performing a fast mailbox scan when it is defined. +# Afterwards the new mail status is tracked by file size changes. +# +# +# set check_new=yes +# +# Name: check_new +# Type: boolean +# Default: yes +# +# +# Note: this option only affects maildir and MH style +# mailboxes. +# +# When set, Mutt will check for new mail delivered while the +# mailbox is open. Especially with MH mailboxes, this operation can +# take quite some time since it involves scanning the directory and +# checking each file to see if it has already been looked at. If +# this variable is unset, no check for new mail is performed +# while the mailbox is open. +# +# +# set collapse_unread=yes +# +# Name: collapse_unread +# Type: boolean +# Default: yes +# +# +# When unset, Mutt will not collapse a thread if it contains any +# unread messages. +# +# +# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" +# +# Name: compose_format +# Type: string +# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" +# +# +# Controls the format of the status line displayed in the ``compose'' +# menu. This string is similar to $status_format, but has its own +# set of printf(3)-like sequences: +# %a total number of attachments +# %h local hostname +# %l approximate size (in bytes) of the current message (see formatstrings-size) +# %v Mutt version string +# +# +# See the text describing the $status_format option for more +# information on how to set $compose_format. +# +# +# set config_charset="" +# +# Name: config_charset +# Type: string +# Default: "" +# +# +# When defined, Mutt will recode commands in rc files from this +# encoding to the current character set as specified by $charset +# and aliases written to $alias_file from the current character set. +# +# Please note that if setting $charset it must be done before +# setting $config_charset. +# +# Recoding should be avoided as it may render unconvertable +# characters as question marks which can lead to undesired +# side effects (for example in regular expressions). +# +# +# set confirmappend=yes +# +# Name: confirmappend +# Type: boolean +# Default: yes +# +# +# When set, Mutt will prompt for confirmation when appending messages to +# an existing mailbox. +# +# +# set confirmcreate=yes +# +# Name: confirmcreate +# Type: boolean +# Default: yes +# +# +# When set, Mutt will prompt for confirmation when saving messages to a +# mailbox which does not yet exist before creating it. +# +# +# set connect_timeout=30 +# +# Name: connect_timeout +# Type: number +# Default: 30 +# +# +# Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this +# many seconds if the connection is not able to be established. A negative +# value causes Mutt to wait indefinitely for the connection attempt to succeed. +# +# +# set content_type="text/plain" +# +# Name: content_type +# Type: string +# Default: "text/plain" +# +# +# Sets the default Content-Type for the body of newly composed messages. +# +# +# set copy=yes +# +# Name: copy +# Type: quadoption +# Default: yes +# +# +# This variable controls whether or not copies of your outgoing messages +# will be saved for later references. Also see $record, +# $save_name, $force_name and ``fcc-hook''. +# +# +# set count_alternatives=no +# +# Name: count_alternatives +# Type: boolean +# Default: no +# +# +# When set, Mutt will recurse inside multipart/alternatives while +# performing attachment searching and counting (see attachments). +# +# Traditionally, multipart/alternative parts have simply represented +# different encodings of the main content of the email. Unfortunately, +# some mail clients have started to place email attachments inside +# one of alternatives. Setting this will allow Mutt to find +# and count matching attachments hidden there, and include them +# in the index via %X or through ~X pattern matching. +# +# +# set crypt_autoencrypt=no +# +# Name: crypt_autoencrypt +# Type: boolean +# Default: no +# +# +# Setting this variable will cause Mutt to always attempt to PGP +# encrypt outgoing messages. This is probably only useful in +# connection to the ``send-hook'' command. It can be overridden +# by use of the pgp menu, when encryption is not required or +# signing is requested as well. If $smime_is_default is set, +# then OpenSSL is used instead to create S/MIME messages and +# settings can be overridden by use of the smime menu instead. +# (Crypto only) +# +# +# set crypt_autopgp=yes +# +# Name: crypt_autopgp +# Type: boolean +# Default: yes +# +# +# This variable controls whether or not mutt may automatically enable +# PGP encryption/signing for messages. See also $crypt_autoencrypt, +# $crypt_replyencrypt, +# $crypt_autosign, $crypt_replysign and $smime_is_default. +# +# +# set crypt_autosign=no +# +# Name: crypt_autosign +# Type: boolean +# Default: no +# +# +# Setting this variable will cause Mutt to always attempt to +# cryptographically sign outgoing messages. This can be overridden +# by use of the pgp menu, when signing is not required or +# encryption is requested as well. If $smime_is_default is set, +# then OpenSSL is used instead to create S/MIME messages and settings can +# be overridden by use of the smime menu instead of the pgp menu. +# (Crypto only) +# +# +# set crypt_autosmime=yes +# +# Name: crypt_autosmime +# Type: boolean +# Default: yes +# +# +# This variable controls whether or not mutt may automatically enable +# S/MIME encryption/signing for messages. See also $crypt_autoencrypt, +# $crypt_replyencrypt, +# $crypt_autosign, $crypt_replysign and $smime_is_default. +# +# +# set crypt_confirmhook=yes +# +# Name: crypt_confirmhook +# Type: boolean +# Default: yes +# +# +# If set, then you will be prompted for confirmation of keys when using +# the crypt-hook command. If unset, no such confirmation prompt will +# be presented. This is generally considered unsafe, especially where +# typos are concerned. +# +# +# set crypt_opportunistic_encrypt=no +# +# Name: crypt_opportunistic_encrypt +# Type: boolean +# Default: no +# +# +# Setting this variable will cause Mutt to automatically enable and +# disable encryption, based on whether all message recipient keys +# can be located by Mutt. +# +# When this option is enabled, Mutt will enable/disable encryption +# each time the TO, CC, and BCC lists are edited. If +# $edit_headers is set, Mutt will also do so each time the message +# is edited. +# +# While this is set, encryption can't be manually enabled/disabled. +# The pgp or smime menus provide a selection to temporarily disable +# this option for the current message. +# +# If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for +# a message, this option will be disabled for that message. It can +# be manually re-enabled in the pgp or smime menus. +# (Crypto only) +# +# +# set crypt_opportunistic_encrypt_strong_keys=no +# +# Name: crypt_opportunistic_encrypt_strong_keys +# Type: boolean +# Default: no +# +# +# When set, this modifies the behavior of $crypt_opportunistic_encrypt +# to only search for "strong keys", that is, keys with full validity +# according to the web-of-trust algorithm. A key with marginal or no +# validity will not enable opportunistic encryption. +# +# For S/MIME, the behavior depends on the backend. Classic S/MIME will +# filter for certificates with the 't' (trusted) flag in the .index file. +# The GPGME backend will use the same filters as with OpenPGP, and depends +# on GPGME's logic for assigning the GPGME_VALIDITY_FULL and +# GPGME_VALIDITY_ULTIMATE validity flag. +# +# +# set crypt_protected_headers_read=yes +# +# Name: crypt_protected_headers_read +# Type: boolean +# Default: yes +# +# +# When set, Mutt will display protected headers ("Memory Hole") in the pager, +# and will update the index and header cache with revised headers. +# Protected headers are stored inside the encrypted or signed part of an +# an email, to prevent disclosure or tampering. +# For more information see https://github.com/autocrypt/memoryhole. +# Currently Mutt only supports the Subject header. +# +# Encrypted messages using protected headers often substitute the exposed +# Subject header with a dummy value (see $crypt_protected_headers_subject). +# Mutt will update its concept of the correct subject after the +# message is opened, i.e. via the <display-message> function. +# If you reply to a message before opening it, Mutt will end up using +# the dummy Subject header, so be sure to open such a message first. +# (Crypto only) +# +# +# set crypt_protected_headers_save=no +# +# Name: crypt_protected_headers_save +# Type: boolean +# Default: no +# +# +# When $crypt_protected_headers_read is set, and a message with a +# protected Subject is opened, Mutt will save the updated Subject +# into the header cache by default. This allows searching/limiting +# based on the protected Subject header if the mailbox is +# re-opened, without having to re-open the message each time. +# However, for mbox/mh mailbox types, or if header caching is not +# set up, you would need to re-open the message each time the +# mailbox was reopened before you could see or search/limit on the +# protected subject again. +# +# When this variable is set, Mutt additionally saves the protected +# Subject back in the clear-text message headers. This +# provides better usability, but with the tradeoff of reduced +# security. The protected Subject header, which may have +# previously been encrypted, is now stored in clear-text in the +# message headers. Copying the message elsewhere, via Mutt or +# external tools, could expose this previously encrypted data. +# Please make sure you understand the consequences of this before +# you enable this variable. +# (Crypto only) +# +# +# set crypt_protected_headers_subject="Encrypted subject" +# +# Name: crypt_protected_headers_subject +# Type: string +# Default: "Encrypted subject" +# +# +# When $crypt_protected_headers_write is set, and the message is marked +# for encryption, this will be substituted into the Subject field in the +# message headers. +# To prevent a subject from being substituted, unset this variable, or set it +# to the empty string. +# (Crypto only) +# +# +# set crypt_protected_headers_write=no +# +# Name: crypt_protected_headers_write +# Type: boolean +# Default: no +# +# +# When set, Mutt will generate protected headers ("Memory Hole") for +# signed and encrypted emails. +# Protected headers are stored inside the encrypted or signed part of an +# an email, to prevent disclosure or tampering. +# For more information see https://github.com/autocrypt/memoryhole. +# Currently Mutt only supports the Subject header. +# (Crypto only) +# +# +# set crypt_replyencrypt=yes +# +# Name: crypt_replyencrypt +# Type: boolean +# Default: yes +# +# +# If set, automatically PGP or OpenSSL encrypt replies to messages which are +# encrypted. +# (Crypto only) +# +# +# set crypt_replysign=no +# +# Name: crypt_replysign +# Type: boolean +# Default: no +# +# +# If set, automatically PGP or OpenSSL sign replies to messages which are +# signed. +# +# Note: this does not work on messages that are encrypted +# and signed! +# (Crypto only) +# +# +# set crypt_replysignencrypted=no +# +# Name: crypt_replysignencrypted +# Type: boolean +# Default: no +# +# +# If set, automatically PGP or OpenSSL sign replies to messages +# which are encrypted. This makes sense in combination with +# $crypt_replyencrypt, because it allows you to sign all +# messages which are automatically encrypted. This works around +# the problem noted in $crypt_replysign, that mutt is not able +# to find out whether an encrypted message is also signed. +# (Crypto only) +# +# +# set crypt_timestamp=yes +# +# Name: crypt_timestamp +# Type: boolean +# Default: yes +# +# +# If set, mutt will include a time stamp in the lines surrounding +# PGP or S/MIME output, so spoofing such lines is more difficult. +# If you are using colors to mark these lines, and rely on these, +# you may unset this setting. +# (Crypto only) +# +# +# set crypt_use_gpgme=no +# +# Name: crypt_use_gpgme +# Type: boolean +# Default: no +# +# +# This variable controls the use of the GPGME-enabled crypto backends. +# If it is set and Mutt was built with gpgme support, the gpgme code for +# S/MIME and PGP will be used instead of the classic code. Note that +# you need to set this option in .muttrc; it won't have any effect when +# used interactively. +# +# Note that the GPGME backend does not support creating old-style inline +# (traditional) PGP encrypted or signed messages (see $pgp_autoinline). +# +# +# set crypt_use_pka=no +# +# Name: crypt_use_pka +# Type: boolean +# Default: no +# +# +# Controls whether mutt uses PKA +# (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature +# verification (only supported by the GPGME backend). +# +# +# set crypt_verify_sig=yes +# +# Name: crypt_verify_sig +# Type: quadoption +# Default: yes +# +# +# If ``yes'', always attempt to verify PGP or S/MIME signatures. +# If ``ask-*'', ask whether or not to verify the signature. +# If ``no'', never attempt to verify cryptographic signatures. +# (Crypto only) +# +# +# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z" +# +# Name: date_format +# Type: string +# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z" +# +# +# This variable controls the format of the date printed by the ``%d'' +# sequence in $index_format. This is passed to the strftime(3) +# function to process the date, see the man page for the proper syntax. +# +# Unless the first character in the string is a bang (``!''), the month +# and week day names are expanded according to the locale. +# If the first character in the string is a +# bang, the bang is discarded, and the month and week day names in the +# rest of the string are expanded in the C locale (that is in US +# English). +# +# +# set default_hook="~f %s !~P | (~P ~C %s)" +# +# Name: default_hook +# Type: string +# Default: "~f %s !~P | (~P ~C %s)" +# +# +# This variable controls how ``message-hook'', ``reply-hook'', ``send-hook'', +# ``send2-hook'', ``save-hook'', and ``fcc-hook'' will +# be interpreted if they are specified with only a simple regexp, +# instead of a matching pattern. The hooks are expanded when they are +# declared, so a hook will be interpreted according to the value of this +# variable at the time the hook is declared. +# +# The default value matches +# if the message is either from a user matching the regular expression +# given, or if it is from you (if the from address matches +# ``alternates'') and is to or cc'ed to a user matching the given +# regular expression. +# +# +# set delete=ask-yes +# +# Name: delete +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether or not messages are really deleted when closing or +# synchronizing a mailbox. If set to yes, messages marked for +# deleting will automatically be purged without prompting. If set to +# no, messages marked for deletion will be kept in the mailbox. +# +# +# set delete_untag=yes +# +# Name: delete_untag +# Type: boolean +# Default: yes +# +# +# If this option is set, mutt will untag messages when marking them +# for deletion. This applies when you either explicitly delete a message, +# or when you save it to another folder. +# +# +# set digest_collapse=yes +# +# Name: digest_collapse +# Type: boolean +# Default: yes +# +# +# If this option is set, mutt's received-attachments menu will not show the subparts of +# individual messages in a multipart/digest. To see these subparts, press ``v'' on that menu. +# +# +# set display_filter="" +# +# Name: display_filter +# Type: path +# Default: "" +# +# +# When set, specifies a command used to filter messages. When a message +# is viewed it is passed as standard input to $display_filter, and the +# filtered message is read from the standard output. +# +# +# set dotlock_program="/usr/local/bin/mutt_dotlock" +# +# Name: dotlock_program +# Type: path +# Default: "/usr/local/bin/mutt_dotlock" +# +# +# Contains the path of the mutt_dotlock(8) binary to be used by +# mutt. +# +# +# set dsn_notify="" +# +# Name: dsn_notify +# Type: string +# Default: "" +# +# +# This variable sets the request for when notification is returned. The +# string consists of a comma separated list (no spaces!) of one or more +# of the following: never, to never request notification, +# failure, to request notification on transmission failure, +# delay, to be notified of message delays, success, to be +# notified of successful transmission. +# +# Example: +# set dsn_notify="failure,delay" +# +# Note: when using $sendmail for delivery, you should not enable +# this unless you are either using Sendmail 8.8.x or greater or a MTA +# providing a sendmail(1)-compatible interface supporting the -N option +# for DSN. For SMTP delivery, DSN support is auto-detected so that it +# depends on the server whether DSN will be used or not. +# +# +# set dsn_return="" +# +# Name: dsn_return +# Type: string +# Default: "" +# +# +# This variable controls how much of your message is returned in DSN +# messages. It may be set to either hdrs to return just the +# message header, or full to return the full message. +# +# Example: +# set dsn_return=hdrs +# +# Note: when using $sendmail for delivery, you should not enable +# this unless you are either using Sendmail 8.8.x or greater or a MTA +# providing a sendmail(1)-compatible interface supporting the -R option +# for DSN. For SMTP delivery, DSN support is auto-detected so that it +# depends on the server whether DSN will be used or not. +# +# +# set duplicate_threads=yes +# +# Name: duplicate_threads +# Type: boolean +# Default: yes +# +# +# This variable controls whether mutt, when $sort is set to threads, threads +# messages with the same Message-Id together. If it is set, it will indicate +# that it thinks they are duplicates of each other with an equals sign +# in the thread tree. +# +# +# set edit_headers=no +# +# Name: edit_headers +# Type: boolean +# Default: no +# +# +# This option allows you to edit the header of your outgoing messages +# along with the body of your message. +# +# Although the compose menu may have localized header labels, the +# labels passed to your editor will be standard RFC 2822 headers, +# (e.g. To:, Cc:, Subject:). Headers added in your editor must +# also be RFC 2822 headers, or one of the pseudo headers listed in +# ``edit-header''. Mutt will not understand localized header +# labels, just as it would not when parsing an actual email. +# +# Note that changes made to the References: and Date: headers are +# ignored for interoperability reasons. +# +# +# set editor="" +# +# Name: editor +# Type: path +# Default: "" +# +# +# This variable specifies which editor is used by mutt. +# It defaults to the value of the $VISUAL, or $EDITOR, environment +# variable, or to the string ``vi'' if neither of those are set. +# +# The $editor string may contain a %s escape, which will be replaced by the name +# of the file to be edited. If the %s escape does not appear in $editor, a +# space and the name to be edited are appended. +# +# The resulting string is then executed by running +# sh -c 'string' +# +# where string is the expansion of $editor described above. +# +# +# set encode_from=no +# +# Name: encode_from +# Type: boolean +# Default: no +# +# +# When set, mutt will quoted-printable encode messages when +# they contain the string ``From '' (note the trailing space) in the beginning of a line. +# This is useful to avoid the tampering certain mail delivery and transport +# agents tend to do with messages (in order to prevent tools from +# misinterpreting the line as a mbox message separator). +# +# +# set entropy_file="" +# +# Name: entropy_file +# Type: path +# Default: "" +# +# +# The file which includes random data that is used to initialize SSL +# library functions. +# +# +# set envelope_from_address="" +# +# Name: envelope_from_address +# Type: e-mail address +# Default: "" +# +# +# Manually sets the envelope sender for outgoing messages. +# This value is ignored if $use_envelope_from is unset. +# +# +# set error_history=30 +# +# Name: error_history +# Type: number +# Default: 30 +# +# +# This variable controls the size (in number of strings remembered) +# of the error messages displayed by mutt. These can be shown with +# the <error-history> function. The history is cleared each +# time this variable is set. +# +# +# set escape="~" +# +# Name: escape +# Type: string +# Default: "~" +# +# +# Escape character to use for functions in the built-in editor. +# +# +# set fast_reply=no +# +# Name: fast_reply +# Type: boolean +# Default: no +# +# +# When set, the initial prompt for recipients and subject are skipped +# when replying to messages, and the initial prompt for subject is +# skipped when forwarding messages. +# +# Note: this variable has no effect when the $autoedit +# variable is set. +# +# +# set fcc_attach=yes +# +# Name: fcc_attach +# Type: quadoption +# Default: yes +# +# +# This variable controls whether or not attachments on outgoing messages +# are saved along with the main body of your message. +# +# +# set fcc_before_send=no +# +# Name: fcc_before_send +# Type: boolean +# Default: no +# +# +# When this variable is set, FCCs will occur before sending +# the message. Before sending, the message cannot be manipulated, +# so it will be stored the exact same as sent: +# $fcc_attach and $fcc_clear will be ignored (using their default +# values). +# +# When unset, the default, FCCs will occur after sending. +# Variables $fcc_attach and $fcc_clear will be respected, allowing +# it to be stored without attachments or encryption/signing if +# desired. +# +# +# set fcc_clear=no +# +# Name: fcc_clear +# Type: boolean +# Default: no +# +# +# When this variable is set, FCCs will be stored unencrypted and +# unsigned, even when the actual message is encrypted and/or +# signed. +# (PGP only) +# +# +# set fcc_delimiter="" +# +# Name: fcc_delimiter +# Type: string +# Default: "" +# +# +# When specified, this allows the ability to Fcc to more than one +# mailbox. The fcc value will be split by this delimiter and Mutt +# will evaluate each part as a mailbox separately. +# +# See $record, ``fcc-hook'', and ``fcc-save-hook''. +# +# +# set flag_safe=no +# +# Name: flag_safe +# Type: boolean +# Default: no +# +# +# If set, flagged messages cannot be deleted. +# +# +#set folder="imaps://imap.gmail.com/" +set folder="~/.mail/gmail/Inbox" +# +# Name: folder +# Type: path +# Default: "~/Mail" +# +# +# Specifies the default location of your mailboxes. A ``+'' or ``='' at the +# beginning of a pathname will be expanded to the value of this +# variable. Note that if you change this variable (from the default) +# value you need to make sure that the assignment occurs before +# you use ``+'' or ``='' for any other variables since expansion takes place +# when handling the ``mailboxes'' command. +# +# +# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" +# +# Name: folder_format +# Type: string +# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" +# +# +# This variable allows you to customize the file browser display to your +# personal taste. This string is similar to $index_format, but has +# its own set of printf(3)-like sequences: +# %C current file number +# %d date/time folder was last modified +# %D date/time folder was last modified using $date_format. +# %f filename (``/'' is appended to directory names, +# ``@'' to symbolic links and ``*'' to executable +# files) +# %F file permissions +# %g group name (or numeric gid, if missing) +# %l number of hard links +# %m number of messages in the mailbox * +# %n number of unread messages in the mailbox * +# %N N if mailbox has new mail, blank otherwise +# %s size in bytes (see formatstrings-size) +# %t ``*'' if the file is tagged, blank otherwise +# %u owner name (or numeric uid, if missing) +# %>X right justify the rest of the string and pad with character ``X'' +# %|X pad to the end of the line with character ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# For an explanation of ``soft-fill'', see the $index_format documentation. +# +# * = can be optionally printed if nonzero +# +# %m, %n, and %N only work for monitored mailboxes. +# %m requires $mail_check_stats to be set. +# %n requires $mail_check_stats to be set (except for IMAP mailboxes). +# +# +# set followup_to=yes +# +# Name: followup_to +# Type: boolean +# Default: yes +# +# +# Controls whether or not the ``Mail-Followup-To:'' header field is +# generated when sending mail. When set, Mutt will generate this +# field when you are replying to a known mailing list, specified with +# the ``subscribe'' or ``lists'' commands. +# +# This field has two purposes. First, preventing you from +# receiving duplicate copies of replies to messages which you send +# to mailing lists, and second, ensuring that you do get a reply +# separately for any messages sent to known lists to which you are +# not subscribed. +# +# The header will contain only the list's address +# for subscribed lists, and both the list address and your own +# email address for unsubscribed lists. Without this header, a +# group reply to your message sent to a subscribed list will be +# sent to both the list and your address, resulting in two copies +# of the same email for you. +# +# +# set force_name=no +# +# Name: force_name +# Type: boolean +# Default: no +# +# +# This variable is similar to $save_name, except that Mutt will +# store a copy of your outgoing message by the username of the address +# you are sending to even if that mailbox does not exist. +# +# Also see the $record variable. +# +# +# set forward_attachments=ask-yes +# +# Name: forward_attachments +# Type: quadoption +# Default: ask-yes +# +# +# When forwarding inline (i.e. $mime_forward unset or +# answered with ``no'' and $forward_decode set), attachments +# which cannot be decoded in a reasonable manner will be attached +# to the newly composed message if this quadoption is set or +# answered with ``yes''. +# +# +# set forward_attribution_intro="----- Forwarded message from %f -----" +# +# Name: forward_attribution_intro +# Type: string +# Default: "----- Forwarded message from %f -----" +# +# +# This is the string that will precede a message which has been forwarded +# in the main body of a message (when $mime_forward is unset). +# For a full listing of defined printf(3)-like sequences see +# the section on $index_format. See also $attribution_locale. +# +# +# set forward_attribution_trailer="----- End forwarded message -----" +# +# Name: forward_attribution_trailer +# Type: string +# Default: "----- End forwarded message -----" +# +# +# This is the string that will follow a message which has been forwarded +# in the main body of a message (when $mime_forward is unset). +# For a full listing of defined printf(3)-like sequences see +# the section on $index_format. See also $attribution_locale. +# +# +# set forward_decode=yes +# +# Name: forward_decode +# Type: boolean +# Default: yes +# +# +# Controls the decoding of complex MIME messages into text/plain when +# forwarding a message. The message header is also RFC2047 decoded. +# This variable is only used, if $mime_forward is unset, +# otherwise $mime_forward_decode is used instead. +# +# +# set forward_decrypt=yes +# +# Name: forward_decrypt +# Type: boolean +# Default: yes +# +# +# Controls the handling of encrypted messages when forwarding a message. +# When set, the outer layer of encryption is stripped off. This +# variable is only used if $mime_forward is set and +# $mime_forward_decode is unset. +# (PGP only) +# +# +# set forward_edit=yes +# +# Name: forward_edit +# Type: quadoption +# Default: yes +# +# +# This quadoption controls whether or not the user is automatically +# placed in the editor when forwarding messages. For those who always want +# to forward with no modification, use a setting of ``no''. +# +# +# set forward_format="[%a: %s]" +# +# Name: forward_format +# Type: string +# Default: "[%a: %s]" +# +# +# This variable controls the default subject when forwarding a message. +# It uses the same format sequences as the $index_format variable. +# +# +# set forward_quote=no +# +# Name: forward_quote +# Type: boolean +# Default: no +# +# +# When set, forwarded messages included in the main body of the +# message (when $mime_forward is unset) will be quoted using +# $indent_string. +# +# +set from="Adam T. Carpenter <atc@53hor.net>" +# +# Name: from +# Type: e-mail address +# Default: "" +# +# +# When set, this variable contains a default from address. It +# can be overridden using ``my_hdr'' (including from a ``send-hook'') and +# $reverse_name. This variable is ignored if $use_from is unset. +# +# This setting defaults to the contents of the environment variable $EMAIL. +# +# +# set gecos_mask="^[^,]*" +# +# Name: gecos_mask +# Type: regular expression +# Default: "^[^,]*" +# +# +# A regular expression used by mutt to parse the GECOS field of a password +# entry when expanding the alias. The default value +# will return the string up to the first ``,'' encountered. +# If the GECOS field contains a string like ``lastname, firstname'' then you +# should set it to ``.*''. +# +# This can be useful if you see the following behavior: you address an e-mail +# to user ID ``stevef'' whose full name is ``Steve Franklin''. If mutt expands +# ``stevef'' to ``"Franklin" stevef@foo.bar'' then you should set the $gecos_mask to +# a regular expression that will match the whole name so mutt will expand +# ``Franklin'' to ``Franklin, Steve''. +# +# +# set hdrs=yes +# +# Name: hdrs +# Type: boolean +# Default: yes +# +# +# When unset, the header fields normally added by the ``my_hdr'' +# command are not created. This variable must be unset before +# composing a new message or replying in order to take effect. If set, +# the user defined header fields are added to every new message. +# +# +# set header=no +# +# Name: header +# Type: boolean +# Default: no +# +# +# When set, this variable causes Mutt to include the header +# of the message you are replying to into the edit buffer. +# The $weed setting applies. +# +# +set header_cache=~/.cache/mutt +# +# Name: header_cache +# Type: path +# Default: "" +# +# +# This variable points to the header cache database. +# If pointing to a directory Mutt will contain a header cache +# database file per folder, if pointing to a file that file will +# be a single global header cache. By default it is unset so no header +# caching will be used. +# +# Header caching can greatly improve speed when opening POP, IMAP +# MH or Maildir folders, see ``caching'' for details. +# +# +# set header_cache_compress=yes +# +# Name: header_cache_compress +# Type: boolean +# Default: yes +# +# +# When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header +# cache backend, this option determines whether the database will be compressed. +# Compression results in database files roughly being one fifth +# of the usual diskspace, but the decompression can result in a +# slower opening of cached folder(s) which in general is still +# much faster than opening non header cached folders. +# +# +# set header_cache_pagesize=16384 +# +# Name: header_cache_pagesize +# Type: number (long) +# Default: 16384 +# +# +# When mutt is compiled with either gdbm or bdb4 as the header cache backend, +# this option changes the database page size. Too large or too small +# values can waste space, memory, or CPU time. The default should be more +# or less optimal for most use cases. +# +# +# set header_color_partial=no +# +# Name: header_color_partial +# Type: boolean +# Default: no +# +# +# When set, color header regexps behave like color body regexps: +# color is applied to the exact text matched by the regexp. When +# unset, color is applied to the entire header. +# +# One use of this option might be to apply color to just the header labels. +# +# See ``color'' for more details. +# +# +# set help=yes +# +# Name: help +# Type: boolean +# Default: yes +# +# +# When set, help lines describing the bindings for the major functions +# provided by each menu are displayed on the first line of the screen. +# +# Note: The binding will not be displayed correctly if the +# function is bound to a sequence rather than a single keystroke. Also, +# the help line may not be updated if a binding is changed while Mutt is +# running. Since this variable is primarily aimed at new users, neither +# of these should present a major problem. +# +# +# set hidden_host=no +# +# Name: hidden_host +# Type: boolean +# Default: no +# +# +# When set, mutt will skip the host name part of $hostname variable +# when adding the domain part to addresses. This variable does not +# affect the generation of Message-IDs, and it will not lead to the +# cut-off of first-level domains. +# +# +# set hide_limited=no +# +# Name: hide_limited +# Type: boolean +# Default: no +# +# +# When set, mutt will not show the presence of messages that are hidden +# by limiting, in the thread tree. +# +# +# set hide_missing=yes +# +# Name: hide_missing +# Type: boolean +# Default: yes +# +# +# When set, mutt will not show the presence of missing messages in the +# thread tree. +# +# +# set hide_thread_subject=yes +# +# Name: hide_thread_subject +# Type: boolean +# Default: yes +# +# +# When set, mutt will not show the subject of messages in the thread +# tree that have the same subject as their parent or closest previously +# displayed sibling. +# +# +# set hide_top_limited=no +# +# Name: hide_top_limited +# Type: boolean +# Default: no +# +# +# When set, mutt will not show the presence of messages that are hidden +# by limiting, at the top of threads in the thread tree. Note that when +# $hide_limited is set, this option will have no effect. +# +# +# set hide_top_missing=yes +# +# Name: hide_top_missing +# Type: boolean +# Default: yes +# +# +# When set, mutt will not show the presence of missing messages at the +# top of threads in the thread tree. Note that when $hide_missing is +# set, this option will have no effect. +# +# +# set history=10 +# +# Name: history +# Type: number +# Default: 10 +# +# +# This variable controls the size (in number of strings remembered) of +# the string history buffer per category. The buffer is cleared each time the +# variable is set. +# +# +# set history_file="~/.mutthistory" +# +# Name: history_file +# Type: path +# Default: "~/.mutthistory" +# +# +# The file in which Mutt will save its history. +# +# Also see $save_history. +# +# +# set history_remove_dups=no +# +# Name: history_remove_dups +# Type: boolean +# Default: no +# +# +# When set, all of the string history will be scanned for duplicates +# when a new entry is added. Duplicate entries in the $history_file will +# also be removed when it is periodically compacted. +# +# +# set honor_disposition=no +# +# Name: honor_disposition +# Type: boolean +# Default: no +# +# +# When set, Mutt will not display attachments with a +# disposition of ``attachment'' inline even if it could +# render the part to plain text. These MIME parts can only +# be viewed from the attachment menu. +# +# If unset, Mutt will render all MIME parts it can +# properly transform to plain text. +# +# +# set honor_followup_to=yes +# +# Name: honor_followup_to +# Type: quadoption +# Default: yes +# +# +# This variable controls whether or not a Mail-Followup-To header is +# honored when group-replying to a message. +# +# +# set hostname="" +# +# Name: hostname +# Type: string +# Default: "" +# +# +# Specifies the fully-qualified hostname of the system mutt is running on +# containing the host's name and the DNS domain it belongs to. It is used +# as the domain part (after ``@'') for local email addresses as well as +# Message-Id headers. +# +# Its value is determined at startup as follows: the node's +# hostname is first determined by the uname(3) function. The +# domain is then looked up using the gethostname(2) and +# getaddrinfo(3) functions. If those calls are unable to +# determine the domain, the full value returned by uname is used. +# Optionally, Mutt can be compiled with a fixed domain name in +# which case a detected one is not used. +# +# Also see $use_domain and $hidden_host. +# +# +# set idn_decode=yes +# +# Name: idn_decode +# Type: boolean +# Default: yes +# +# +# When set, Mutt will show you international domain names decoded. +# Note: You can use IDNs for addresses even if this is unset. +# This variable only affects decoding. (IDN only) +# +# +# set idn_encode=yes +# +# Name: idn_encode +# Type: boolean +# Default: yes +# +# +# When set, Mutt will encode international domain names using +# IDN. Unset this if your SMTP server can handle newer (RFC 6531) +# UTF-8 encoded domains. (IDN only) +# +# +# set ignore_linear_white_space=no +# +# Name: ignore_linear_white_space +# Type: boolean +# Default: no +# +# +# This option replaces linear-white-space between encoded-word +# and text to a single space to prevent the display of MIME-encoded +# ``Subject:'' field from being divided into multiple lines. +# +# +# set ignore_list_reply_to=no +# +# Name: ignore_list_reply_to +# Type: boolean +# Default: no +# +# +# Affects the behavior of the <reply> function when replying to +# messages from mailing lists (as defined by the ``subscribe'' or +# ``lists'' commands). When set, if the ``Reply-To:'' field is +# set to the same value as the ``To:'' field, Mutt assumes that the +# ``Reply-To:'' field was set by the mailing list to automate responses +# to the list, and will ignore this field. To direct a response to the +# mailing list when this option is set, use the <list-reply> +# function; <group-reply> will reply to both the sender and the +# list. +# +# +# set imap_authenticators="" +# +# Name: imap_authenticators +# Type: string +# Default: "" +# +# +# This is a colon-delimited list of authentication methods mutt may +# attempt to use to log in to an IMAP server, in the order mutt should +# try them. Authentication methods are either ``login'' or the right +# side of an IMAP ``AUTH=xxx'' capability string, e.g. ``digest-md5'', ``gssapi'' +# or ``cram-md5''. This option is case-insensitive. If it's +# unset (the default) mutt will try all available methods, +# in order from most-secure to least-secure. +# +# Example: +# set imap_authenticators="gssapi:cram-md5:login" +# +# Note: Mutt will only fall back to other authentication methods if +# the previous methods are unavailable. If a method is available but +# authentication fails, mutt will not connect to the IMAP server. +# +# +# set imap_check_subscribed=no +# +# Name: imap_check_subscribed +# Type: boolean +# Default: no +# +# +# When set, mutt will fetch the set of subscribed folders from +# your server on connection, and add them to the set of mailboxes +# it polls for new mail just as if you had issued individual ``mailboxes'' +# commands. +# +# +# set imap_condstore=no +# +# Name: imap_condstore +# Type: boolean +# Default: no +# +# +# When set, mutt will use the CONDSTORE extension (RFC 7162) +# if advertised by the server. Mutt's current implementation is basic, +# used only for initial message fetching and flag updates. +# +# For some IMAP servers, enabling this will slightly speed up +# downloading initial messages. Unfortunately, Gmail is not one +# those, and displays worse performance when enabled. Your +# mileage may vary. +# +# +# set imap_deflate=no +# +# Name: imap_deflate +# Type: boolean +# Default: no +# +# +# When set, mutt will use the COMPRESS=DEFLATE extension (RFC +# 4978) if advertised by the server. +# +# In general a good compression efficiency can be achieved, which +# speeds up reading large mailboxes also on fairly good connections. +# +# +# set imap_delim_chars="/." +# +# Name: imap_delim_chars +# Type: string +# Default: "/." +# +# +# This contains the list of characters which you would like to treat +# as folder separators for displaying IMAP paths. In particular it +# helps in using the ``='' shortcut for your folder variable. +# +# +# set imap_fetch_chunk_size=0 +# +# Name: imap_fetch_chunk_size +# Type: number (long) +# Default: 0 +# +# +# When set to a value greater than 0, new headers will be +# downloaded in groups of this many headers per request. If you +# have a very large mailbox, this might prevent a timeout and +# disconnect when opening the mailbox, by sending a FETCH per set +# of this many headers, instead of a single FETCH for all new +# headers. +# +# +# set imap_headers="" +# +# Name: imap_headers +# Type: string +# Default: "" +# +# +# Mutt requests these header fields in addition to the default headers +# (``Date:'', ``From:'', ``Sender:'', ``Subject:'', ``To:'', ``Cc:'', ``Message-Id:'', +# ``References:'', ``Content-Type:'', ``Content-Description:'', ``In-Reply-To:'', +# ``Reply-To:'', ``Lines:'', ``List-Post:'', ``X-Label:'') from IMAP +# servers before displaying the index menu. You may want to add more +# headers for spam detection. +# +# Note: This is a space separated list, items should be uppercase +# and not contain the colon, e.g. ``X-BOGOSITY X-SPAM-STATUS'' for the +# ``X-Bogosity:'' and ``X-Spam-Status:'' header fields. +# +# +# set imap_idle=no +# +# Name: imap_idle +# Type: boolean +# Default: no +# +# +# When set, mutt will attempt to use the IMAP IDLE extension +# to check for new mail in the current mailbox. Some servers +# (dovecot was the inspiration for this option) react badly +# to mutt's implementation. If your connection seems to freeze +# up periodically, try unsetting this. +# +# +set imap_keepalive=300 +# +# Name: imap_keepalive +# Type: number +# Default: 300 +# +# +# This variable specifies the maximum amount of time in seconds that mutt +# will wait before polling open IMAP connections, to prevent the server +# from closing them before mutt has finished with them. The default is +# well within the RFC-specified minimum amount of time (30 minutes) before +# a server is allowed to do this, but in practice the RFC does get +# violated every now and then. Reduce this number if you find yourself +# getting disconnected from your IMAP server due to inactivity. +# +# +# set imap_list_subscribed=no +# +# Name: imap_list_subscribed +# Type: boolean +# Default: no +# +# +# This variable configures whether IMAP folder browsing will look for +# only subscribed folders or all folders. This can be toggled in the +# IMAP browser with the <toggle-subscribed> function. +# +# +# set imap_login="" +# +# Name: imap_login +# Type: string +# Default: "" +# +# +# Your login name on the IMAP server. +# +# This variable defaults to the value of $imap_user. +# +# +# set imap_oauth_refresh_command="" +# +# Name: imap_oauth_refresh_command +# Type: string +# Default: "" +# +# +# The command to run to generate an OAUTH refresh token for +# authorizing your connection to your IMAP server. This command will be +# run on every connection attempt that uses the OAUTHBEARER authentication +# mechanism. See ``oauth'' for details. +# +# +# set imap_pass="" +# +# Name: imap_pass +# Type: string +# Default: "" +# +# +# Specifies the password for your IMAP account. If unset, Mutt will +# prompt you for your password when you invoke the <imap-fetch-mail> function +# or try to open an IMAP folder. +# +# Warning: you should only use this option when you are on a +# fairly secure machine, because the superuser can read your muttrc even +# if you are the only one who can read the file. +# +# +# set imap_passive=no +# +# Name: imap_passive +# Type: boolean +# Default: yes +# +# +# When set, mutt will not open new IMAP connections to check for new +# mail. Mutt will only check for new mail over existing IMAP +# connections. This is useful if you don't want to be prompted for +# user/password pairs on mutt invocation, or if opening the connection +# is slow. +# +# +# set imap_peek=yes +# +# Name: imap_peek +# Type: boolean +# Default: yes +# +# +# When set, mutt will avoid implicitly marking your mail as read whenever +# you fetch a message from the server. This is generally a good thing, +# but can make closing an IMAP folder somewhat slower. This option +# exists to appease speed freaks. +# +# +# set imap_pipeline_depth=15 +# +# Name: imap_pipeline_depth +# Type: number +# Default: 15 +# +# +# Controls the number of IMAP commands that may be queued up before they +# are sent to the server. A deeper pipeline reduces the amount of time +# mutt must wait for the server, and can make IMAP servers feel much +# more responsive. But not all servers correctly handle pipelined commands, +# so if you have problems you might want to try setting this variable to 0. +# +# Note: Changes to this variable have no effect on open connections. +# +# +# set imap_poll_timeout=15 +# +# Name: imap_poll_timeout +# Type: number +# Default: 15 +# +# +# This variable specifies the maximum amount of time in seconds +# that mutt will wait for a response when polling IMAP connections +# for new mail, before timing out and closing the connection. Set +# to 0 to disable timing out. +# +# +# set imap_qresync=no +# +# Name: imap_qresync +# Type: boolean +# Default: no +# +# +# When set, mutt will use the QRESYNC extension (RFC 7162) +# if advertised by the server. Mutt's current implementation is basic, +# used only for initial message fetching and flag updates. +# +# Note: this feature is currently experimental. If you experience +# strange behavior, such as duplicate or missing messages please +# file a bug report to let us know. +# +# +# set imap_servernoise=yes +# +# Name: imap_servernoise +# Type: boolean +# Default: yes +# +# +# When set, mutt will display warning messages from the IMAP +# server as error messages. Since these messages are often +# harmless, or generated due to configuration problems on the +# server which are out of the users' hands, you may wish to suppress +# them at some point. +# +# +# set imap_user= +# +# Name: imap_user +# Type: string +# Default: "" +# +# +# The name of the user whose mail you intend to access on the IMAP +# server. +# +# This variable defaults to your user name on the local machine. +# +# +# set implicit_autoview=no +# +# Name: implicit_autoview +# Type: boolean +# Default: no +# +# +# If set to ``yes'', mutt will look for a mailcap entry with the +# ``copiousoutput'' flag set for every MIME attachment it doesn't have +# an internal viewer defined for. If such an entry is found, mutt will +# use the viewer defined in that entry to convert the body part to text +# form. +# +# +# set include=ask-yes +# +# Name: include +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether or not a copy of the message(s) you are replying to +# is included in your reply. +# +# +# set include_encrypted=no +# +# Name: include_encrypted +# Type: boolean +# Default: no +# +# +# Controls whether or not Mutt includes separately encrypted attachment +# contents when replying. +# +# This variable was added to prevent accidental exposure of encrypted +# contents when replying to an attacker. If a previously encrypted message +# were attached by the attacker, they could trick an unwary recipient into +# decrypting and including the message in their reply. +# +# +# set include_onlyfirst=no +# +# Name: include_onlyfirst +# Type: boolean +# Default: no +# +# +# Controls whether or not Mutt includes only the first attachment +# of the message you are replying. +# +# +# set indent_string="> " +# +# Name: indent_string +# Type: string +# Default: "> " +# +# +# Specifies the string to prepend to each line of text quoted in a +# message to which you are replying. You are strongly encouraged not to +# change this value, as it tends to agitate the more fanatical netizens. +# +# The value of this option is ignored if $text_flowed is set, because +# the quoting mechanism is strictly defined for format=flowed. +# +# This option is a format string, please see the description of +# $index_format for supported printf(3)-style sequences. +# +# +# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" +# +# Name: index_format +# Type: string +# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" +# +# +# This variable allows you to customize the message index display to +# your personal taste. +# +# ``Format strings'' are similar to the strings used in the C +# function printf(3) to format output (see the man page for more details). +# For an explanation of the %? construct, see the $status_format description. +# The following sequences are defined in Mutt: +# %a address of the author +# %A reply-to address (if present; otherwise: address of author) +# %b filename of the original message folder (think mailbox) +# %B the list to which the letter was sent, or else the folder name (%b). +# %c number of characters (bytes) in the message (see formatstrings-size) +# %C current message number +# %d date and time of the message in the format specified by +# $date_format converted to sender's time zone +# %D date and time of the message in the format specified by +# $date_format converted to the local time zone +# %e current message number in thread +# %E number of messages in current thread +# %f sender (address + real name), either From: or Return-Path: +# %F author name, or recipient name if the message is from you +# %H spam attribute(s) of this message +# %i message-id of the current message +# %l number of lines in the unprocessed message (may not work with +# maildir, mh, and IMAP folders) +# %L If an address in the ``To:'' or ``Cc:'' header field matches an address +# defined by the users ``subscribe'' command, this displays +# "To <list-name>", otherwise the same as %F. +# %m total number of message in the mailbox +# %M number of hidden messages if the thread is collapsed. +# %N message score +# %n author's real name (or address if missing) +# %O original save folder where mutt would formerly have +# stashed the message: list name or recipient name +# if not sent to a list +# %P progress indicator for the built-in pager (how much of the file has been displayed) +# %r comma separated list of ``To:'' recipients +# %R comma separated list of ``Cc:'' recipients +# %s subject of the message +# %S single character status of the message (``N''/``O''/``D''/``d''/``!''/``r''/``*'') +# %t ``To:'' field (recipients) +# %T the appropriate character from the $to_chars string +# %u user (login) name of the author +# %v first name of the author, or the recipient if the message is from you +# %X number of attachments +# (please see the ``attachments'' section for possible speed effects) +# %y ``X-Label:'' field, if present +# %Y ``X-Label:'' field, if present, and (1) not at part of a thread tree, +# (2) at the top of a thread, or (3) ``X-Label:'' is different from +# preceding message's ``X-Label:''. +# %Z a three character set of message status flags. +# the first character is new/read/replied flags (``n''/``o''/``r''/``O''/``N''). +# the second is deleted or encryption flags (``D''/``d''/``S''/``P''/``s''/``K''). +# the third is either tagged/flagged (``*''/``!''), or one of the characters +# listed in $to_chars. +# %@name@ insert and evaluate format-string from the matching +# ``index-format-hook'' command +# %{fmt} the date and time of the message is converted to sender's +# time zone, and ``fmt'' is expanded by the library function +# strftime(3); a leading bang disables locales +# %[fmt] the date and time of the message is converted to the local +# time zone, and ``fmt'' is expanded by the library function +# strftime(3); a leading bang disables locales +# %(fmt) the local date and time when the message was received. +# ``fmt'' is expanded by the library function strftime(3); +# a leading bang disables locales +# %<fmt> the current local time. ``fmt'' is expanded by the library +# function strftime(3); a leading bang disables locales. +# %>X right justify the rest of the string and pad with character ``X'' +# %|X pad to the end of the line with character ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# Note that for mbox/mmdf, ``%l'' applies to the unprocessed message, and +# for maildir/mh, the value comes from the ``Lines:'' header field when +# present (the meaning is normally the same). Thus the value depends on +# the encodings used in the different parts of the message and has little +# meaning in practice. +# +# ``Soft-fill'' deserves some explanation: Normal right-justification +# will print everything to the left of the ``%>'', displaying padding and +# whatever lies to the right only if there's room. By contrast, +# soft-fill gives priority to the right-hand side, guaranteeing space +# to display it and showing padding only if there's still room. If +# necessary, soft-fill will eat text leftwards to make room for +# rightward text. +# +# Note that these expandos are supported in +# ``save-hook'', ``fcc-hook'', ``fcc-save-hook'', and +# ``index-format-hook''. +# +# They are also supported in the configuration variables $attribution, +# $forward_attribution_intro, $forward_attribution_trailer, +# $forward_format, $indent_string, $message_format, $pager_format, +# and $post_indent_string. +# +# +# set ispell="ispell" +# +# Name: ispell +# Type: path +# Default: "ispell" +# +# +# How to invoke ispell (GNU's spell-checking software). +# +# +# set keep_flagged=no +# +# Name: keep_flagged +# Type: boolean +# Default: no +# +# +# If set, read messages marked as flagged will not be moved +# from your spool mailbox to your $mbox mailbox, or as a result of +# a ``mbox-hook'' command. +# +# +# set mail_check=30 +# +# Name: mail_check +# Type: number +# Default: 5 +# +# +# This variable configures how often (in seconds) mutt should look for +# new mail. Also see the $timeout variable. +# +# +# set mail_check_recent=yes +# +# Name: mail_check_recent +# Type: boolean +# Default: yes +# +# +# When set, Mutt will only notify you about new mail that has been received +# since the last time you opened the mailbox. When unset, Mutt will notify you +# if any new mail exists in the mailbox, regardless of whether you have visited it +# recently. +# +# When $mark_old is set, Mutt does not consider the mailbox to contain new +# mail if only old messages exist. +# +# +# set mail_check_stats=no +# +# Name: mail_check_stats +# Type: boolean +# Default: no +# +# +# When set, mutt will periodically calculate message +# statistics of a mailbox while polling for new mail. It will +# check for unread, flagged, and total message counts. Because +# this operation is more performance intensive, it defaults to +# unset, and has a separate option, $mail_check_stats_interval, to +# control how often to update these counts. +# +# Message statistics can also be explicitly calculated by invoking the +# <check-stats> +# function. +# +# +# set mail_check_stats_interval=60 +# +# Name: mail_check_stats_interval +# Type: number +# Default: 60 +# +# +# When $mail_check_stats is set, this variable configures +# how often (in seconds) mutt will update message counts. +# +# +set mailcap_path=~/.config/mutt/mailcap +# +# Name: mailcap_path +# Type: string +# Default: "" +# +# +# This variable specifies which files to consult when attempting to +# display MIME bodies not directly supported by Mutt. The default value +# is generated during startup: see the ``mailcap'' section of the manual. +# +# +# set mailcap_sanitize=yes +# +# Name: mailcap_sanitize +# Type: boolean +# Default: yes +# +# +# If set, mutt will restrict possible characters in mailcap % expandos +# to a well-defined set of safe characters. This is the safe setting, +# but we are not sure it doesn't break some more advanced MIME stuff. +# +# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE +# DOING! +# +# +# set maildir_header_cache_verify=yes +# +# Name: maildir_header_cache_verify +# Type: boolean +# Default: yes +# +# +# Check for Maildir unaware programs other than mutt having modified maildir +# files when the header cache is in use. This incurs one stat(2) per +# message every time the folder is opened (which can be very slow for NFS +# folders). +# +# +# set maildir_trash=no +# +# Name: maildir_trash +# Type: boolean +# Default: no +# +# +# If set, messages marked as deleted will be saved with the maildir +# trashed flag instead of unlinked. Note: this only applies +# to maildir-style mailboxes. Setting it will have no effect on other +# mailbox types. +# +# +# set maildir_check_cur=no +# +# Name: maildir_check_cur +# Type: boolean +# Default: no +# +# +# If set, mutt will poll both the new and cur directories of +# a maildir folder for new messages. This might be useful if other +# programs interacting with the folder (e.g. dovecot) are moving new +# messages to the cur directory. Note that setting this option may +# slow down polling for new messages in large folders, since mutt has +# to scan all cur messages. +# +# +# set mark_macro_prefix="'" +# +# Name: mark_macro_prefix +# Type: string +# Default: "'" +# +# +# Prefix for macros created using mark-message. A new macro +# automatically generated with <mark-message>a will be composed +# from this prefix and the letter a. +# +# +# set mark_old=yes +# +# Name: mark_old +# Type: boolean +# Default: yes +# +# +# Controls whether or not mutt marks new unread +# messages as old if you exit a mailbox without reading them. +# With this option set, the next time you start mutt, the messages +# will show up with an ``O'' next to them in the index menu, +# indicating that they are old. +# +# +# set markers=yes +# +# Name: markers +# Type: boolean +# Default: yes +# +# +# Controls the display of wrapped lines in the internal pager. If set, a +# ``+'' marker is displayed at the beginning of wrapped lines. +# +# Also see the $smart_wrap variable. +# +# +# set mask="!^\\.[^.]" +# +# Name: mask +# Type: regular expression +# Default: "!^\\.[^.]" +# +# +# A regular expression used in the file browser, optionally preceded by +# the not operator ``!''. Only files whose names match this mask +# will be shown. The match is always case-sensitive. +# +# +# set mbox="~/mbox" +# +# Name: mbox +# Type: path +# Default: "~/mbox" +# +# +# This specifies the folder into which read mail in your $spoolfile +# folder will be appended. +# +# Also see the $move variable. +# +# +set mbox_type=Maildir +# +# Name: mbox_type +# Type: folder magic +# Default: mbox +# +# +# The default mailbox type used when creating new folders. May be any of +# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overridden by the +# -m command-line option. +# +# +# set menu_context=0 +# +# Name: menu_context +# Type: number +# Default: 0 +# +# +# This variable controls the number of lines of context that are given +# when scrolling through menus. (Similar to $pager_context.) +# +# +# set menu_move_off=yes +# +# Name: menu_move_off +# Type: boolean +# Default: yes +# +# +# When unset, the bottom entry of menus will never scroll up past +# the bottom of the screen, unless there are less entries than lines. +# When set, the bottom entry may move off the bottom. +# +# +# set menu_scroll=no +# +# Name: menu_scroll +# Type: boolean +# Default: no +# +# +# When set, menus will be scrolled up or down one line when you +# attempt to move across a screen boundary. If unset, the screen +# is cleared and the next or previous page of the menu is displayed +# (useful for slow links to avoid many redraws). +# +# +# set message_cache_clean=no +# +# Name: message_cache_clean +# Type: boolean +# Default: no +# +# +# If set, mutt will clean out obsolete entries from the message cache when +# the mailbox is synchronized. You probably only want to set it +# every once in a while, since it can be a little slow +# (especially for large folders). +# +# +set message_cachedir=~/.cache/mutt +# +# Name: message_cachedir +# Type: path +# Default: "" +# +# +# Set this to a directory and mutt will cache copies of messages from +# your IMAP and POP servers here. You are free to remove entries at any +# time. +# +# When setting this variable to a directory, mutt needs to fetch every +# remote message only once and can perform regular expression searches +# as fast as for local folders. +# +# Also see the $message_cache_clean variable. +# +# +# set message_format="%s" +# +# Name: message_format +# Type: string +# Default: "%s" +# +# +# This is the string displayed in the ``attachment'' menu for +# attachments of type message/rfc822. For a full listing of defined +# printf(3)-like sequences see the section on $index_format. +# +# +# set meta_key=no +# +# Name: meta_key +# Type: boolean +# Default: no +# +# +# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) +# set as if the user had pressed the Esc key and whatever key remains +# after having the high bit removed. For example, if the key pressed +# has an ASCII value of 0xf8, then this is treated as if the user had +# pressed Esc then ``x''. This is because the result of removing the +# high bit from 0xf8 is 0x78, which is the ASCII character +# ``x''. +# +# +# set metoo=no +# +# Name: metoo +# Type: boolean +# Default: no +# +# +# If unset, Mutt will remove your address (see the ``alternates'' +# command) from the list of recipients when replying to a message. +# +# +# set mh_purge=no +# +# Name: mh_purge +# Type: boolean +# Default: no +# +# +# When unset, mutt will mimic mh's behavior and rename deleted messages +# to ,<old file name> in mh folders instead of really deleting +# them. This leaves the message on disk but makes programs reading the folder +# ignore it. If the variable is set, the message files will simply be +# deleted. +# +# This option is similar to $maildir_trash for Maildir folders. +# +# +# set mh_seq_flagged="flagged" +# +# Name: mh_seq_flagged +# Type: string +# Default: "flagged" +# +# +# The name of the MH sequence used for flagged messages. +# +# +# set mh_seq_replied="replied" +# +# Name: mh_seq_replied +# Type: string +# Default: "replied" +# +# +# The name of the MH sequence used to tag replied messages. +# +# +# set mh_seq_unseen="unseen" +# +# Name: mh_seq_unseen +# Type: string +# Default: "unseen" +# +# +# The name of the MH sequence used for unseen messages. +# +# +# set mime_forward=no +# +# Name: mime_forward +# Type: quadoption +# Default: no +# +# +# When set, the message you are forwarding will be attached as a +# separate message/rfc822 MIME part instead of included in the main body of the +# message. This is useful for forwarding MIME messages so the receiver +# can properly view the message as it was delivered to you. If you like +# to switch between MIME and not MIME from mail to mail, set this +# variable to ``ask-no'' or ``ask-yes''. +# +# Also see $forward_decode and $mime_forward_decode. +# +# +# set mime_forward_decode=no +# +# Name: mime_forward_decode +# Type: boolean +# Default: no +# +# +# Controls the decoding of complex MIME messages into text/plain when +# forwarding a message while $mime_forward is set. Otherwise +# $forward_decode is used instead. +# +# +# set mime_forward_rest=yes +# +# Name: mime_forward_rest +# Type: quadoption +# Default: yes +# +# +# When forwarding multiple attachments of a MIME message from the attachment +# menu, attachments which cannot be decoded in a reasonable manner will +# be attached to the newly composed message if this option is set. +# +# +# set mime_type_query_command="" +# +# Name: mime_type_query_command +# Type: string +# Default: "" +# +# +# This specifies a command to run, to determine the mime type of a +# new attachment when composing a message. Unless +# $mime_type_query_first is set, this will only be run if the +# attachment's extension is not found in the mime.types file. +# +# The string may contain a ``%s'', which will be substituted with the +# attachment filename. Mutt will add quotes around the string substituted +# for ``%s'' automatically according to shell quoting rules, so you should +# avoid adding your own. If no ``%s'' is found in the string, Mutt will +# append the attachment filename to the end of the string. +# +# The command should output a single line containing the +# attachment's mime type. +# +# Suggested values are ``xdg-mime query filetype'' or +# ``file -bi''. +# +# +# set mime_type_query_first=no +# +# Name: mime_type_query_first +# Type: boolean +# Default: no +# +# +# When set, the $mime_type_query_command will be run before the +# mime.types lookup. +# +# +# set mix_entry_format="%4n %c %-16s %a" +# +# Name: mix_entry_format +# Type: string +# Default: "%4n %c %-16s %a" +# +# +# This variable describes the format of a remailer line on the mixmaster +# chain selection screen. The following printf(3)-like sequences are +# supported: +# %n The running number on the menu. +# %c Remailer capabilities. +# %s The remailer's short name. +# %a The remailer's e-mail address. +# +# +# set mixmaster="mixmaster" +# +# Name: mixmaster +# Type: path +# Default: "mixmaster" +# +# +# This variable contains the path to the Mixmaster binary on your +# system. It is used with various sets of parameters to gather the +# list of known remailers, and to finally send a message through the +# mixmaster chain. +# +# +# set move=no +# +# Name: move +# Type: quadoption +# Default: no +# +# +# Controls whether or not Mutt will move read messages +# from your spool mailbox to your $mbox mailbox, or as a result of +# a ``mbox-hook'' command. +# +# +# set narrow_tree=no +# +# Name: narrow_tree +# Type: boolean +# Default: no +# +# +# This variable, when set, makes the thread tree narrower, allowing +# deeper threads to fit on the screen. +# +# +# set net_inc=10 +# +# Name: net_inc +# Type: number +# Default: 10 +# +# +# Operations that expect to transfer a large amount of data over the +# network will update their progress every $net_inc kilobytes. +# If set to 0, no progress messages will be displayed. +# +# See also $read_inc, $write_inc and $net_inc. +# +# +# set new_mail_command="" +# +# Name: new_mail_command +# Type: path +# Default: "" +# +# +# If set, Mutt will call this command after a new message is received. +# See the $status_format documentation for the values that can be formatted +# into this command. +# +# +# set pager="builtin" +# +# Name: pager +# Type: path +# Default: "builtin" +# +# +# This variable specifies which pager you would like to use to view +# messages. The value ``builtin'' means to use the built-in pager, otherwise this +# variable should specify the pathname of the external pager you would +# like to use. +# +# Using an external pager may have some disadvantages: Additional +# keystrokes are necessary because you can't call mutt functions +# directly from the pager, and screen resizes cause lines longer than +# the screen width to be badly formatted in the help menu. +# +# When using an external pager, also see $prompt_after which defaults +# set. +# +# +# set pager_context=0 +# +# Name: pager_context +# Type: number +# Default: 0 +# +# +# This variable controls the number of lines of context that are given +# when displaying the next or previous page in the internal pager. By +# default, Mutt will display the line after the last one on the screen +# at the top of the next page (0 lines of context). +# +# This variable also specifies the amount of context given for search +# results. If positive, this many lines will be given before a match, +# if 0, the match will be top-aligned. +# +# +# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)" +# +# Name: pager_format +# Type: string +# Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)" +# +# +# This variable controls the format of the one-line message ``status'' +# displayed before each message in either the internal or an external +# pager. The valid sequences are listed in the $index_format +# section. +# +# +# set pager_index_lines=0 +# +# Name: pager_index_lines +# Type: number +# Default: 0 +# +# +# Determines the number of lines of a mini-index which is shown when in +# the pager. The current message, unless near the top or bottom of the +# folder, will be roughly one third of the way down this mini-index, +# giving the reader the context of a few messages before and after the +# message. This is useful, for example, to determine how many messages +# remain to be read in the current thread. One of the lines is reserved +# for the status bar from the index, so a setting of 6 +# will only show 5 lines of the actual index. A value of 0 results in +# no index being shown. If the number of messages in the current folder +# is less than $pager_index_lines, then the index will only use as +# many lines as it needs. +# +# +# set pager_stop=no +# +# Name: pager_stop +# Type: boolean +# Default: no +# +# +# When set, the internal-pager will not move to the next message +# when you are at the end of a message and invoke the <next-page> +# function. +# +# +# set pgp_auto_decode=no +# +# Name: pgp_auto_decode +# Type: boolean +# Default: no +# +# +# If set, mutt will automatically attempt to decrypt traditional PGP +# messages whenever the user performs an operation which ordinarily would +# result in the contents of the message being operated on. For example, +# if the user displays a pgp-traditional message which has not been manually +# checked with the <check-traditional-pgp> function, mutt will automatically +# check the message for traditional pgp. +# +# +# set pgp_autoinline=no +# +# Name: pgp_autoinline +# Type: boolean +# Default: no +# +# +# This option controls whether Mutt generates old-style inline +# (traditional) PGP encrypted or signed messages under certain +# circumstances. This can be overridden by use of the pgp menu, +# when inline is not required. The GPGME backend does not support +# this option. +# +# Note that Mutt might automatically use PGP/MIME for messages +# which consist of more than a single MIME part. Mutt can be +# configured to ask before sending PGP/MIME messages when inline +# (traditional) would not work. +# +# Also see the $pgp_mime_auto variable. +# +# Also note that using the old-style PGP message format is strongly +# deprecated. +# (PGP only) +# +# +# set pgp_check_exit=yes +# +# Name: pgp_check_exit +# Type: boolean +# Default: yes +# +# +# If set, mutt will check the exit code of the PGP subprocess when +# signing or encrypting. A non-zero exit code means that the +# subprocess failed. +# (PGP only) +# +# +# set pgp_check_gpg_decrypt_status_fd=yes +# +# Name: pgp_check_gpg_decrypt_status_fd +# Type: boolean +# Default: yes +# +# +# If set, mutt will check the status file descriptor output +# of $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes +# indicating successful decryption. This will check for the presence of +# DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all +# PLAINTEXT occurs between the BEGIN_DECRYPTION and END_DECRYPTION +# status codes. +# +# If unset, mutt will instead match the status fd output +# against $pgp_decryption_okay. +# (PGP only) +# +# +# set pgp_clearsign_command="" +# +# Name: pgp_clearsign_command +# Type: string +# Default: "" +# +# +# This format is used to create an old-style ``clearsigned'' PGP +# message. Note that the use of this format is strongly +# deprecated. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_decode_command="" +# +# Name: pgp_decode_command +# Type: string +# Default: "" +# +# +# This format strings specifies a command which is used to decode +# application/pgp attachments. +# +# The PGP command formats have their own set of printf(3)-like sequences: +# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty +# string otherwise. Note: This may be used with a %? construct. +# %f Expands to the name of a file containing a message. +# %s Expands to the name of a file containing the signature part +# of a multipart/signed attachment when verifying it. +# %a The value of $pgp_sign_as if set, otherwise the value +# of $pgp_default_key. +# %r One or more key IDs (or fingerprints if available). +# +# +# For examples on how to configure these formats for the various versions +# of PGP which are floating around, see the pgp and gpg sample configuration files in +# the share/examples/mutt subdirectory which has been installed on your system +# alongside the documentation. +# (PGP only) +# +# +# set pgp_decrypt_command="" +# +# Name: pgp_decrypt_command +# Type: string +# Default: "" +# +# +# This command is used to decrypt a PGP encrypted message. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_decryption_okay="" +# +# Name: pgp_decryption_okay +# Type: regular expression +# Default: "" +# +# +# If you assign text to this variable, then an encrypted PGP +# message is only considered successfully decrypted if the output +# from $pgp_decrypt_command contains the text. This is used to +# protect against a spoofed encrypted message, with multipart/encrypted +# headers but containing a block that is not actually encrypted. +# (e.g. simply signed and ascii armored text). +# +# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable +# is ignored. +# (PGP only) +# +# +# set pgp_default_key="" +# +# Name: pgp_default_key +# Type: string +# Default: "" +# +# +# This is the default key-pair to use for PGP operations. It will be +# used for encryption (see $postpone_encrypt and $pgp_self_encrypt). +# +# It will also be used for signing unless $pgp_sign_as is set. +# +# The (now deprecated) pgp_self_encrypt_as is an alias for this +# variable, and should no longer be used. +# (PGP only) +# +# +# set pgp_encrypt_only_command="" +# +# Name: pgp_encrypt_only_command +# Type: string +# Default: "" +# +# +# This command is used to encrypt a body part without signing it. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_encrypt_sign_command="" +# +# Name: pgp_encrypt_sign_command +# Type: string +# Default: "" +# +# +# This command is used to both sign and encrypt a body part. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u" +# +# Name: pgp_entry_format +# Type: string +# Default: "%4n %t%f %4l/0x%k %-4a %2c %u" +# +# +# This variable allows you to customize the PGP key selection menu to +# your personal taste. This string is similar to $index_format, but +# has its own set of printf(3)-like sequences: +# %n number +# %k key id +# %u user id +# %a algorithm +# %l key length +# %f flags +# %c capabilities +# %t trust/validity of the key-uid association +# %[<s>] date of the key where <s> is an strftime(3) expression +# +# +# (PGP only) +# +# +# set pgp_export_command="" +# +# Name: pgp_export_command +# Type: string +# Default: "" +# +# +# This command is used to export a public key from the user's +# key ring. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_getkeys_command="" +# +# Name: pgp_getkeys_command +# Type: string +# Default: "" +# +# +# This command is invoked whenever Mutt needs to fetch the public key associated with +# an email address. Of the sequences supported by $pgp_decode_command, %r is +# the only printf(3)-like sequence used with this format. Note that +# in this case, %r expands to the email address, not the public key ID (the key ID is +# unknown, which is why Mutt is invoking this command). +# (PGP only) +# +# +# set pgp_good_sign="" +# +# Name: pgp_good_sign +# Type: regular expression +# Default: "" +# +# +# If you assign a text to this variable, then a PGP signature is only +# considered verified if the output from $pgp_verify_command contains +# the text. Use this variable if the exit code from the command is 0 +# even for bad signatures. +# (PGP only) +# +# +# set pgp_ignore_subkeys=yes +# +# Name: pgp_ignore_subkeys +# Type: boolean +# Default: yes +# +# +# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, +# the principal key will inherit the subkeys' capabilities. Unset this +# if you want to play interesting key selection games. +# (PGP only) +# +# +# set pgp_import_command="" +# +# Name: pgp_import_command +# Type: string +# Default: "" +# +# +# This command is used to import a key from a message into +# the user's public key ring. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_list_pubring_command="" +# +# Name: pgp_list_pubring_command +# Type: string +# Default: "" +# +# +# This command is used to list the public key ring's contents. The +# output format must be analogous to the one used by +# gpg --list-keys --with-colons --with-fingerprint +# +# This format is also generated by the mutt_pgpring utility which comes +# with mutt. +# +# Note: gpg's fixed-list-mode option should not be used. It +# produces a different date format which may result in mutt showing +# incorrect key generation dates. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# Note that in this case, %r expands to the search string, which is a list of +# one or more quoted values such as email address, name, or keyid. +# (PGP only) +# +# +# set pgp_list_secring_command="" +# +# Name: pgp_list_secring_command +# Type: string +# Default: "" +# +# +# This command is used to list the secret key ring's contents. The +# output format must be analogous to the one used by: +# gpg --list-keys --with-colons --with-fingerprint +# +# This format is also generated by the mutt_pgpring utility which comes +# with mutt. +# +# Note: gpg's fixed-list-mode option should not be used. It +# produces a different date format which may result in mutt showing +# incorrect key generation dates. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# Note that in this case, %r expands to the search string, which is a list of +# one or more quoted values such as email address, name, or keyid. +# (PGP only) +# +# +# set pgp_long_ids=yes +# +# Name: pgp_long_ids +# Type: boolean +# Default: yes +# +# +# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. +# NOTE: Internally, Mutt has transitioned to using fingerprints (or long key IDs +# as a fallback). This option now only controls the display of key IDs +# in the key selection menu and a few other places. +# (PGP only) +# +# +# set pgp_mime_auto=ask-yes +# +# Name: pgp_mime_auto +# Type: quadoption +# Default: ask-yes +# +# +# This option controls whether Mutt will prompt you for +# automatically sending a (signed/encrypted) message using +# PGP/MIME when inline (traditional) fails (for any reason). +# +# Also note that using the old-style PGP message format is strongly +# deprecated. +# (PGP only) +# +# +# set pgp_replyinline=no +# +# Name: pgp_replyinline +# Type: boolean +# Default: no +# +# +# Setting this variable will cause Mutt to always attempt to +# create an inline (traditional) message when replying to a +# message which is PGP encrypted/signed inline. This can be +# overridden by use of the pgp menu, when inline is not +# required. This option does not automatically detect if the +# (replied-to) message is inline; instead it relies on Mutt +# internals for previously checked/flagged messages. +# +# Note that Mutt might automatically use PGP/MIME for messages +# which consist of more than a single MIME part. Mutt can be +# configured to ask before sending PGP/MIME messages when inline +# (traditional) would not work. +# +# Also see the $pgp_mime_auto variable. +# +# Also note that using the old-style PGP message format is strongly +# deprecated. +# (PGP only) +# +# +# set pgp_retainable_sigs=no +# +# Name: pgp_retainable_sigs +# Type: boolean +# Default: no +# +# +# If set, signed and encrypted messages will consist of nested +# multipart/signed and multipart/encrypted body parts. +# +# This is useful for applications like encrypted and signed mailing +# lists, where the outer layer (multipart/encrypted) can be easily +# removed, while the inner multipart/signed part is retained. +# (PGP only) +# +# +# set pgp_self_encrypt=yes +# +# Name: pgp_self_encrypt +# Type: boolean +# Default: yes +# +# +# When set, PGP encrypted messages will also be encrypted +# using the key in $pgp_default_key. +# (PGP only) +# +# +# set pgp_show_unusable=yes +# +# Name: pgp_show_unusable +# Type: boolean +# Default: yes +# +# +# If set, mutt will display non-usable keys on the PGP key selection +# menu. This includes keys which have been revoked, have expired, or +# have been marked as ``disabled'' by the user. +# (PGP only) +# +# +# set pgp_sign_as="" +# +# Name: pgp_sign_as +# Type: string +# Default: "" +# +# +# If you have a different key pair to use for signing, you should +# set this to the signing key. Most people will only need to set +# $pgp_default_key. It is recommended that you use the keyid form +# to specify your key (e.g. 0x00112233). +# (PGP only) +# +# +# set pgp_sign_command="" +# +# Name: pgp_sign_command +# Type: string +# Default: "" +# +# +# This command is used to create the detached PGP signature for a +# multipart/signed PGP/MIME body part. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_sort_keys=address +# +# Name: pgp_sort_keys +# Type: sort order +# Default: address +# +# +# Specifies how the entries in the pgp menu are sorted. The +# following are legal values: +# address sort alphabetically by user id +# keyid sort alphabetically by key id +# date sort by key creation date +# trust sort by the trust of the key +# +# +# If you prefer reverse order of the above values, prefix it with +# ``reverse-''. +# (PGP only) +# +# +# set pgp_strict_enc=yes +# +# Name: pgp_strict_enc +# Type: boolean +# Default: yes +# +# +# If set, Mutt will automatically encode PGP/MIME signed messages as +# quoted-printable. Please note that unsetting this variable may +# lead to problems with non-verifyable PGP signatures, so only change +# this if you know what you are doing. +# (PGP only) +# +# +# set pgp_timeout=300 +# +# Name: pgp_timeout +# Type: number (long) +# Default: 300 +# +# +# The number of seconds after which a cached passphrase will expire if +# not used. +# (PGP only) +# +# +# set pgp_use_gpg_agent=yes +# +# Name: pgp_use_gpg_agent +# Type: boolean +# Default: yes +# +# +# If set, mutt expects a gpg-agent(1) process will handle +# private key passphrase prompts. If unset, mutt will prompt +# for the passphrase and pass it via stdin to the pgp command. +# +# Note that as of version 2.1, GnuPG automatically spawns an agent +# and requires the agent be used for passphrase management. Since +# that version is increasingly prevalent, this variable now +# defaults set. +# +# Mutt works with a GUI or curses pinentry program. A TTY pinentry +# should not be used. +# +# If you are using an older version of GnuPG without an agent running, +# or another encryption program without an agent, you will need to +# unset this variable. +# (PGP only) +# +# +# set pgp_verify_command="" +# +# Name: pgp_verify_command +# Type: string +# Default: "" +# +# +# This command is used to verify PGP signatures. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pgp_verify_key_command="" +# +# Name: pgp_verify_key_command +# Type: string +# Default: "" +# +# +# This command is used to verify key information from the key selection +# menu. +# +# This is a format string, see the $pgp_decode_command command for +# possible printf(3)-like sequences. +# (PGP only) +# +# +# set pipe_decode=no +# +# Name: pipe_decode +# Type: boolean +# Default: no +# +# +# Used in connection with the <pipe-message> command. When unset, +# Mutt will pipe the messages without any preprocessing. When set, Mutt +# will weed headers and will attempt to decode the messages +# first. +# +# +# set pipe_sep="\n" +# +# Name: pipe_sep +# Type: string +# Default: "\n" +# +# +# The separator to add between messages when piping a list of tagged +# messages to an external Unix command. +# +# +# set pipe_split=no +# +# Name: pipe_split +# Type: boolean +# Default: no +# +# +# Used in connection with the <pipe-message> function following +# <tag-prefix>. If this variable is unset, when piping a list of +# tagged messages Mutt will concatenate the messages and will pipe them +# all concatenated. When set, Mutt will pipe the messages one by one. +# In both cases the messages are piped in the current sorted order, +# and the $pipe_sep separator is added after each message. +# +# +# set pop_auth_try_all=yes +# +# Name: pop_auth_try_all +# Type: boolean +# Default: yes +# +# +# If set, Mutt will try all available authentication methods. +# When unset, Mutt will only fall back to other authentication +# methods if the previous methods are unavailable. If a method is +# available but authentication fails, Mutt will not connect to the POP server. +# +# +# set pop_authenticators="" +# +# Name: pop_authenticators +# Type: string +# Default: "" +# +# +# This is a colon-delimited list of authentication methods mutt may +# attempt to use to log in to an POP server, in the order mutt should +# try them. Authentication methods are either ``user'', ``apop'' or any +# SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''. +# This option is case-insensitive. If this option is unset +# (the default) mutt will try all available methods, in order from +# most-secure to least-secure. +# +# Example: +# set pop_authenticators="digest-md5:apop:user" +# +# +# set pop_checkinterval=60 +# +# Name: pop_checkinterval +# Type: number +# Default: 60 +# +# +# This variable configures how often (in seconds) mutt should look for +# new mail in the currently selected mailbox if it is a POP mailbox. +# +# +# set pop_delete=ask-no +# +# Name: pop_delete +# Type: quadoption +# Default: ask-no +# +# +# If set, Mutt will delete successfully downloaded messages from the POP +# server when using the <fetch-mail> function. When unset, Mutt will +# download messages but also leave them on the POP server. +# +# +# set pop_host="" +# +# Name: pop_host +# Type: string +# Default: "" +# +# +# The name of your POP server for the <fetch-mail> function. You +# can also specify an alternative port, username and password, i.e.: +# [pop[s]://][username[:password]@]popserver[:port] +# +# where ``[...]'' denotes an optional part. +# +# +# set pop_last=no +# +# Name: pop_last +# Type: boolean +# Default: no +# +# +# If this variable is set, mutt will try to use the ``LAST'' POP command +# for retrieving only unread messages from the POP server when using +# the <fetch-mail> function. +# +# +# set pop_oauth_refresh_command="" +# +# Name: pop_oauth_refresh_command +# Type: string +# Default: "" +# +# +# The command to run to generate an OAUTH refresh token for +# authorizing your connection to your POP server. This command will be +# run on every connection attempt that uses the OAUTHBEARER authentication +# mechanism. See ``oauth'' for details. +# +# +# set pop_pass="" +# +# Name: pop_pass +# Type: string +# Default: "" +# +# +# Specifies the password for your POP account. If unset, Mutt will +# prompt you for your password when you open a POP mailbox. +# +# Warning: you should only use this option when you are on a +# fairly secure machine, because the superuser can read your muttrc +# even if you are the only one who can read the file. +# +# +# set pop_reconnect=ask-yes +# +# Name: pop_reconnect +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether or not Mutt will try to reconnect to the POP server if +# the connection is lost. +# +# +# set pop_user="" +# +# Name: pop_user +# Type: string +# Default: "" +# +# +# Your login name on the POP server. +# +# This variable defaults to your user name on the local machine. +# +# +# set post_indent_string="" +# +# Name: post_indent_string +# Type: string +# Default: "" +# +# +# Similar to the $attribution variable, Mutt will append this +# string after the inclusion of a message which is being replied to. +# For a full listing of defined printf(3)-like sequences see +# the section on $index_format. +# +# +# set postpone=ask-yes +# +# Name: postpone +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether or not messages are saved in the $postponed +# mailbox when you elect not to send immediately. +# +# Also see the $recall variable. +# +# +# set postponed=+[Gmail]/Drafts +# +# Name: postponed +# Type: path +# Default: "~/postponed" +# +# +# Mutt allows you to indefinitely ``postpone sending a message'' which +# you are editing. When you choose to postpone a message, Mutt saves it +# in the mailbox specified by this variable. +# +# Also see the $postpone variable. +# +# +# set postpone_encrypt=no +# +# Name: postpone_encrypt +# Type: boolean +# Default: no +# +# +# When set, postponed messages that are marked for encryption will be +# self-encrypted. Mutt will first try to encrypt using the value specified +# in $pgp_default_key or $smime_default_key. If those are not +# set, it will try the deprecated $postpone_encrypt_as. +# (Crypto only) +# +# +# set postpone_encrypt_as="" +# +# Name: postpone_encrypt_as +# Type: string +# Default: "" +# +# +# This is a deprecated fall-back variable for $postpone_encrypt. +# Please use $pgp_default_key or $smime_default_key. +# (Crypto only) +# +# +# set preconnect="" +# +# Name: preconnect +# Type: string +# Default: "" +# +# +# If set, a shell command to be executed if mutt fails to establish +# a connection to the server. This is useful for setting up secure +# connections, e.g. with ssh(1). If the command returns a nonzero +# status, mutt gives up opening the server. Example: +# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \ +# sleep 20 < /dev/null > /dev/null" +# +# Mailbox ``foo'' on ``mailhost.net'' can now be reached +# as ``{localhost:1234}foo''. +# +# Note: For this example to work, you must be able to log in to the +# remote machine without having to enter a password. +# +# +# set print=ask-no +# +# Name: print +# Type: quadoption +# Default: ask-no +# +# +# Controls whether or not Mutt really prints messages. +# This is set to ``ask-no'' by default, because some people +# accidentally hit ``p'' often. +# +# +# set print_command="lpr" +# +# Name: print_command +# Type: path +# Default: "lpr" +# +# +# This specifies the command pipe that should be used to print messages. +# +# +# set print_decode=yes +# +# Name: print_decode +# Type: boolean +# Default: yes +# +# +# Used in connection with the <print-message> command. If this +# option is set, the message is decoded before it is passed to the +# external command specified by $print_command. If this option +# is unset, no processing will be applied to the message when +# printing it. The latter setting may be useful if you are using +# some advanced printer filter which is able to properly format +# e-mail messages for printing. +# +# +# set print_split=no +# +# Name: print_split +# Type: boolean +# Default: no +# +# +# Used in connection with the <print-message> command. If this option +# is set, the command specified by $print_command is executed once for +# each message which is to be printed. If this option is unset, +# the command specified by $print_command is executed only once, and +# all the messages are concatenated, with a form feed as the message +# separator. +# +# Those who use the enscript(1) program's mail-printing mode will +# most likely want to set this option. +# +# +# set prompt_after=yes +# +# Name: prompt_after +# Type: boolean +# Default: yes +# +# +# If you use an external $pager, setting this variable will +# cause Mutt to prompt you for a command when the pager exits rather +# than returning to the index menu. If unset, Mutt will return to the +# index menu when the external pager exits. +# +# +# set query_command="" +# +# Name: query_command +# Type: path +# Default: "" +# +# +# This specifies the command Mutt will use to make external address +# queries. The string may contain a ``%s'', which will be substituted +# with the query string the user types. Mutt will add quotes around the +# string substituted for ``%s'' automatically according to shell quoting +# rules, so you should avoid adding your own. If no ``%s'' is found in +# the string, Mutt will append the user's query to the end of the string. +# See ``query'' for more information. +# +# +# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?" +# +# Name: query_format +# Type: string +# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?" +# +# +# This variable describes the format of the ``query'' menu. The +# following printf(3)-style sequences are understood: +# %a destination address +# %c current entry number +# %e extra information * +# %n destination name +# %t ``*'' if current entry is tagged, a space otherwise +# %>X right justify the rest of the string and pad with ``X'' +# %|X pad to the end of the line with ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# For an explanation of ``soft-fill'', see the $index_format documentation. +# +# * = can be optionally printed if nonzero, see the $status_format documentation. +# +# +# set quit=yes +# +# Name: quit +# Type: quadoption +# Default: yes +# +# +# This variable controls whether ``quit'' and ``exit'' actually quit +# from mutt. If this option is set, they do quit, if it is unset, they +# have no effect, and if it is set to ask-yes or ask-no, you are +# prompted for confirmation when you try to quit. +# +# +# set quote_empty= +# +# Name: quote_empty +# Type: boolean +# Default: +# +# +# Controls whether or not empty lines will be quoted using +# ``indent_string''. +# +# +# set quote_quoted= +# +# Name: quote_quoted +# Type: boolean +# Default: +# +# +# Controls how quoted lines will be quoted. If set, one quote +# character will be added to the end of existing prefix. Otherwise, +# quoted lines will be prepended by ``indent_string''. +# +# +# set quote_regexp="^([ \t]*[|>:}#])+" +# +# Name: quote_regexp +# Type: regular expression +# Default: "^([ \t]*[|>:}#])+" +# +# +# A regular expression used in the internal pager to determine quoted +# sections of text in the body of a message. Quoted text may be filtered +# out using the <toggle-quoted> command, or colored according to the +# ``color quoted'' family of directives. +# +# Higher levels of quoting may be colored differently (``color quoted1'', +# ``color quoted2'', etc.). The quoting level is determined by removing +# the last character from the matched text and recursively reapplying +# the regular expression until it fails to produce a match. +# +# Match detection may be overridden by the $smileys regular expression. +# +# +# set read_inc=10 +# +# Name: read_inc +# Type: number +# Default: 10 +# +# +# If set to a value greater than 0, Mutt will display which message it +# is currently on when reading a mailbox or when performing search actions +# such as search and limit. The message is printed after +# this many messages have been read or searched (e.g., if set to 25, Mutt will +# print a message when it is at message 25, and then again when it gets +# to message 50). This variable is meant to indicate progress when +# reading or searching large mailboxes which may take some time. +# When set to 0, only a single message will appear before the reading +# the mailbox. +# +# Also see the $write_inc, $net_inc and $time_inc variables and the +# ``tuning'' section of the manual for performance considerations. +# +# +# set read_only=no +# +# Name: read_only +# Type: boolean +# Default: no +# +# +# If set, all folders are opened in read-only mode. +# +# +# set realname="" +# +# Name: realname +# Type: string +# Default: "" +# +# +# This variable specifies what ``real'' or ``personal'' name should be used +# when sending messages. +# +# By default, this is the GECOS field from /etc/passwd. Note that this +# variable will not be used when the user has set a real name +# in the $from variable. +# +# +# set recall=ask-yes +# +# Name: recall +# Type: quadoption +# Default: ask-yes +# +# +# Controls whether or not Mutt recalls postponed messages +# when composing a new message. +# +# Setting this variable to yes is not generally useful, and thus not +# recommended. Note that the <recall-message> function can be used +# to manually recall postponed messages. +# +# Also see $postponed variable. +# +# +# set record="~/sent" +# +# Name: record +# Type: path +# Default: "~/sent" +# +# +# This specifies the file into which your outgoing messages should be +# appended. (This is meant as the primary method for saving a copy of +# your messages, but another way to do this is using the ``my_hdr'' +# command to create a ``Bcc:'' field with your email address in it.) +# +# The value of $record is overridden by the $force_name and +# $save_name variables, and the ``fcc-hook'' command. Also see $copy +# and $write_bcc. +# +# Multiple mailboxes may be specified if $fcc_delimiter is +# set to a string delimiter. +# +# +# set reflow_space_quotes=yes +# +# Name: reflow_space_quotes +# Type: boolean +# Default: yes +# +# +# This option controls how quotes from format=flowed messages are displayed +# in the pager and when replying (with $text_flowed unset). +# When set, this option adds spaces after each level of quote marks, turning +# ">>>foo" into "> > > foo". +# +# Note: If $reflow_text is unset, this option has no effect. +# Also, this option does not affect replies when $text_flowed is set. +# +# +# set reflow_text=yes +# +# Name: reflow_text +# Type: boolean +# Default: yes +# +# +# When set, Mutt will reformat paragraphs in text/plain +# parts marked format=flowed. If unset, Mutt will display paragraphs +# unaltered from how they appear in the message body. See RFC3676 for +# details on the format=flowed format. +# +# Also see $reflow_wrap, and $wrap. +# +# +# set reflow_wrap=78 +# +# Name: reflow_wrap +# Type: number +# Default: 78 +# +# +# This variable controls the maximum paragraph width when reformatting text/plain +# parts when $reflow_text is set. When the value is 0, paragraphs will +# be wrapped at the terminal's right margin. A positive value sets the +# paragraph width relative to the left margin. A negative value set the +# paragraph width relative to the right margin. +# +# Also see $wrap. +# +# +# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*" +# +# Name: reply_regexp +# Type: regular expression +# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*" +# +# +# A regular expression used to recognize reply messages when threading +# and replying. The default value corresponds to the English "Re:" and +# the German "Aw:". +# +# +# set reply_self=no +# +# Name: reply_self +# Type: boolean +# Default: no +# +# +# If unset and you are replying to a message sent by you, Mutt will +# assume that you want to reply to the recipients of that message rather +# than to yourself. +# +# Also see the ``alternates'' command. +# +# +# set reply_to=ask-yes +# +# Name: reply_to +# Type: quadoption +# Default: ask-yes +# +# +# If set, when replying to a message, Mutt will use the address listed +# in the Reply-to: header as the recipient of the reply. If unset, +# it will use the address in the From: header field instead. This +# option is useful for reading a mailing list that sets the Reply-To: +# header field to the list address and you want to send a private +# message to the author of a message. +# +# +# set resolve=yes +# +# Name: resolve +# Type: boolean +# Default: yes +# +# +# When set, the cursor will be automatically advanced to the next +# (possibly undeleted) message whenever a command that modifies the +# current message is executed. +# +# +# set resume_draft_files=no +# +# Name: resume_draft_files +# Type: boolean +# Default: no +# +# +# If set, draft files (specified by -H on the command +# line) are processed similarly to when resuming a postponed +# message. Recipients are not prompted for; send-hooks are not +# evaluated; no alias expansion takes place; user-defined headers +# and signatures are not added to the message. +# +# +# set resume_edited_draft_files=yes +# +# Name: resume_edited_draft_files +# Type: boolean +# Default: yes +# +# +# If set, draft files previously edited (via -E -H on +# the command line) will have $resume_draft_files automatically +# set when they are used as a draft file again. +# +# The first time a draft file is saved, mutt will add a header, +# X-Mutt-Resume-Draft to the saved file. The next time the draft +# file is read in, if mutt sees the header, it will set +# $resume_draft_files. +# +# This option is designed to prevent multiple signatures, +# user-defined headers, and other processing effects from being +# made multiple times to the draft file. +# +# +# set reverse_alias=no +# +# Name: reverse_alias +# Type: boolean +# Default: no +# +# +# This variable controls whether or not Mutt will display the ``personal'' +# name from your aliases in the index menu if it finds an alias that +# matches the message's sender. For example, if you have the following +# alias: +# alias juser abd30425@somewhere.net (Joe User) +# +# and then you receive mail which contains the following header: +# From: abd30425@somewhere.net +# +# It would be displayed in the index menu as ``Joe User'' instead of +# ``abd30425@somewhere.net.'' This is useful when the person's e-mail +# address is not human friendly. +# +# +# set reverse_name=no +# +# Name: reverse_name +# Type: boolean +# Default: no +# +# +# It may sometimes arrive that you receive mail to a certain machine, +# move the messages to another machine, and reply to some the messages +# from there. If this variable is set, the default From: line of +# the reply messages is built using the address where you received the +# messages you are replying to if that address matches your +# ``alternates''. If the variable is unset, or the address that would be +# used doesn't match your ``alternates'', the From: line will use +# your address on the current machine. +# +# Also see the ``alternates'' command and $reverse_realname. +# +# +# set reverse_realname=yes +# +# Name: reverse_realname +# Type: boolean +# Default: yes +# +# +# This variable fine-tunes the behavior of the $reverse_name feature. +# +# When it is unset, Mutt will remove the real name part of a +# matching address. This allows the use of the email address +# without having to also use what the sender put in the real name +# field. +# +# When it is set, Mutt will use the matching address as-is. +# +# In either case, a missing real name will be filled in afterwards +# using the value of $realname. +# +# +# set reverse_reply=no +# +# Name: reverse_reply +# Type: boolean +# Default: no +# +# +# When set, this variable uses the name from your aliases in the To and Cc +# headers of reply mails you send, like reverse_alias does in the index. +# When unset, the headers taken from the original mail are left unchanged. +# +# +# set rfc2047_parameters=no +# +# Name: rfc2047_parameters +# Type: boolean +# Default: no +# +# +# When this variable is set, Mutt will decode RFC2047-encoded MIME +# parameters. You want to set this variable when mutt suggests you +# to save attachments to files named like: +# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= +# +# When this variable is set interactively, the change won't be +# active until you change folders. +# +# Note that this use of RFC2047's encoding is explicitly +# prohibited by the standard, but nevertheless encountered in the +# wild. +# +# Also note that setting this parameter will not have the effect +# that mutt generates this kind of encoding. Instead, mutt will +# unconditionally use the encoding specified in RFC2231. +# +# +# set save_address=no +# +# Name: save_address +# Type: boolean +# Default: no +# +# +# If set, mutt will take the sender's full address when choosing a +# default folder for saving a mail. If $save_name or $force_name +# is set too, the selection of the Fcc folder will be changed as well. +# +# +# set save_empty=yes +# +# Name: save_empty +# Type: boolean +# Default: yes +# +# +# When unset, mailboxes which contain no saved messages will be removed +# when closed (the exception is $spoolfile which is never removed). +# If set, mailboxes are never removed. +# +# Note: This only applies to mbox and MMDF folders, Mutt does not +# delete MH and Maildir directories. +# +# +# set save_history=0 +# +# Name: save_history +# Type: number +# Default: 0 +# +# +# This variable controls the size of the history (per category) saved in the +# $history_file file. +# +# +# set save_name=no +# +# Name: save_name +# Type: boolean +# Default: no +# +# +# This variable controls how copies of outgoing messages are saved. +# When set, a check is made to see if a mailbox specified by the +# recipient address exists (this is done by searching for a mailbox in +# the $folder directory with the username part of the +# recipient address). If the mailbox exists, the outgoing message will +# be saved to that mailbox, otherwise the message is saved to the +# $record mailbox. +# +# Also see the $force_name variable. +# +# +# set score=yes +# +# Name: score +# Type: boolean +# Default: yes +# +# +# When this variable is unset, scoring is turned off. This can +# be useful to selectively disable scoring for certain folders when the +# $score_threshold_delete variable and related are used. +# +# +# set score_threshold_delete=-1 +# +# Name: score_threshold_delete +# Type: number +# Default: -1 +# +# +# Messages which have been assigned a score equal to or lower than the value +# of this variable are automatically marked for deletion by mutt. Since +# mutt scores are always greater than or equal to zero, the default setting +# of this variable will never mark a message for deletion. +# +# +# set score_threshold_flag=9999 +# +# Name: score_threshold_flag +# Type: number +# Default: 9999 +# +# +# Messages which have been assigned a score greater than or equal to this +# variable's value are automatically marked "flagged". +# +# +# set score_threshold_read=-1 +# +# Name: score_threshold_read +# Type: number +# Default: -1 +# +# +# Messages which have been assigned a score equal to or lower than the value +# of this variable are automatically marked as read by mutt. Since +# mutt scores are always greater than or equal to zero, the default setting +# of this variable will never mark a message read. +# +# +# set search_context=0 +# +# Name: search_context +# Type: number +# Default: 0 +# +# +# For the pager, this variable specifies the number of lines shown +# before search results. By default, search results will be top-aligned. +# +# +# set send_charset="us-ascii:iso-8859-1:utf-8" +# +# Name: send_charset +# Type: string +# Default: "us-ascii:iso-8859-1:utf-8" +# +# +# A colon-delimited list of character sets for outgoing messages. Mutt will use the +# first character set into which the text can be converted exactly. +# If your $charset is not ``iso-8859-1'' and recipients may not +# understand ``UTF-8'', it is advisable to include in the list an +# appropriate widely used standard character set (such as +# ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after +# ``iso-8859-1''. +# +# In case the text cannot be converted into one of these exactly, +# mutt uses $charset as a fallback. +# +# +# set send_multipart_alternative=no +# +# Name: send_multipart_alternative +# Type: quadoption +# Default: no +# +# +# If set, Mutt will generate a multipart/alternative +# container and an alternative part using the filter script specified in +# $send_multipart_alternative_filter. +# See the section ``MIME Multipart/Alternative'' (alternative-order). +# +# Note that enabling multipart/alternative is not compatible with inline +# PGP encryption. Mutt will prompt to use PGP/MIME in that case. +# +# +# set send_multipart_alternative_filter="" +# +# Name: send_multipart_alternative_filter +# Type: path +# Default: "" +# +# +# This specifies a filter script, which will convert the main +# (composed) message of the email to an alternative format. The +# message will be piped to the filter's stdin. The expected output +# of the filter is the generated mime type, e.g. text/html, +# followed by a blank line, and then the converted content. +# See the section ``MIME Multipart/Alternative'' (alternative-order). +# +# +# set sendmail="/usr/sbin/sendmail -oem -oi" +# +# Name: sendmail +# Type: path +# Default: "/usr/sbin/sendmail -oem -oi" +# +# +# Specifies the program and arguments used to deliver mail sent by Mutt. +# Mutt expects that the specified program interprets additional +# arguments as recipient addresses. Mutt appends all recipients after +# adding a -- delimiter (if not already present). Additional +# flags, such as for $use_8bitmime, $use_envelope_from, +# $dsn_notify, or $dsn_return will be added before the delimiter. +# +# See also: $write_bcc. +# +# +# set sendmail_wait=0 +# +# Name: sendmail_wait +# Type: number +# Default: 0 +# +# +# Specifies the number of seconds to wait for the $sendmail process +# to finish before giving up and putting delivery in the background. +# +# Mutt interprets the value of this variable as follows: +# >0 number of seconds to wait for sendmail to finish before continuing +# 0 wait forever for sendmail to finish +# <0 always put sendmail in the background without waiting +# +# +# Note that if you specify a value other than 0, the output of the child +# process will be put in a temporary file. If there is some error, you +# will be informed as to where to find the output. +# +# +# set shell="" +# +# Name: shell +# Type: path +# Default: "" +# +# +# Command to use when spawning a subshell. By default, the user's login +# shell from /etc/passwd is used. +# +# +# set sidebar_delim_chars="/." +# +# Name: sidebar_delim_chars +# Type: string +# Default: "/." +# +# +# This contains the list of characters which you would like to treat +# as folder separators for displaying paths in the sidebar. +# +# Local mail is often arranged in directories: `dir1/dir2/mailbox'. +# set sidebar_delim_chars='/' +# +# IMAP mailboxes are often named: `folder1.folder2.mailbox'. +# set sidebar_delim_chars='.' +# +# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string. +# +# +# set sidebar_divider_char="|" +# +# Name: sidebar_divider_char +# Type: string +# Default: "|" +# +# +# This specifies the characters to be drawn between the sidebar (when +# visible) and the other Mutt panels. ASCII and Unicode line-drawing +# characters are supported. +# +# +# set sidebar_folder_indent=no +# +# Name: sidebar_folder_indent +# Type: boolean +# Default: no +# +# +# Set this to indent mailboxes in the sidebar. +# +# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars. +# +# +# set sidebar_format="%B%* %n" +# +# Name: sidebar_format +# Type: string +# Default: "%B%* %n" +# +# +# This variable allows you to customize the sidebar display. This string is +# similar to $index_format, but has its own set of printf(3)-like +# sequences: +# %B Name of the mailbox +# %S * Size of mailbox (total number of messages) +# %N * Number of unread messages in the mailbox +# %n N if mailbox has new mail, blank otherwise +# %F * Number of Flagged messages in the mailbox +# %! ``!'' : one flagged message; +# ``!!'' : two flagged messages; +# ``n!'' : n flagged messages (for n > 2). +# Otherwise prints nothing. +# %d * @ Number of deleted messages +# %L * @ Number of messages after limiting +# %t * @ Number of tagged messages +# %>X right justify the rest of the string and pad with ``X'' +# %|X pad to the end of the line with ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# * = Can be optionally printed if nonzero +# @ = Only applicable to the current folder +# +# In order to use %S, %N, %F, and %!, $mail_check_stats must +# be set. When thus set, a suggested value for this option is +# "%B%?F? [%F]?%* %?N?%N/?%S". +# +# +# set sidebar_indent_string=" " +# +# Name: sidebar_indent_string +# Type: string +# Default: " " +# +# +# This specifies the string that is used to indent mailboxes in the sidebar. +# It defaults to two spaces. +# +# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars. +# +# +# set sidebar_new_mail_only=no +# +# Name: sidebar_new_mail_only +# Type: boolean +# Default: no +# +# +# When set, the sidebar will only display mailboxes containing new, or +# flagged, mail. +# +# See also: sidebar_whitelist. +# +# +# set sidebar_next_new_wrap=no +# +# Name: sidebar_next_new_wrap +# Type: boolean +# Default: no +# +# +# When set, the <sidebar-next-new> command will not stop and the end of +# the list of mailboxes, but wrap around to the beginning. The +# <sidebar-prev-new> command is similarly affected, wrapping around to +# the end of the list. +# +# +# set sidebar_relative_shortpath_indent=no +# +# Name: sidebar_relative_shortpath_indent +# Type: boolean +# Default: no +# +# +# When set, this option changes how $sidebar_short_path and +# $sidebar_folder_indent perform shortening and indentation: both +# will look at the previous sidebar entries and shorten/indent +# relative to the most recent parent. +# +# An example of this option set/unset for mailboxes listed in this +# order, with $sidebar_short_path=yes, +# $sidebar_folder_indent=yes, and $sidebar_indent_string="→": +# mailbox set unset +# =a.b =a.b →b +# =a.b.c.d →c.d →→→d +# =a.b.e →e →→e +# +# +# The second line illustrates most clearly. With this option set, +# =a.b.c.d is shortened relative to =a.b, becoming +# c.d; it is also indented one place relative to =a.b. +# With this option unset =a.b.c.d is always shortened to the +# last part of the mailbox, d and is indented three places, +# with respect to $folder (represented by '='). +# +# When set, the third line will also be indented and shortened +# relative to the first line. +# +# +# set sidebar_short_path=no +# +# Name: sidebar_short_path +# Type: boolean +# Default: no +# +# +# By default the sidebar will show the mailbox's path, relative to the +# $folder variable. Setting sidebar_shortpath=yes will shorten the +# names relative to the previous name. Here's an example: +# shortpath=no shortpath=yes shortpath=yes, folderindent=yes, indentstr=".." +# fruit fruit fruit +# fruit.apple apple ..apple +# fruit.banana banana ..banana +# fruit.cherry cherry ..cherry +# +# +# See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string. +# +# +# set sidebar_sort_method=order +# +# Name: sidebar_sort_method +# Type: sort order +# Default: order +# +# +# Specifies how to sort entries in the file browser. By default, the +# entries are sorted alphabetically. Valid values: +# - alpha (alphabetically) +# - count (all message count) +# - flagged (flagged message count) +# - name (alphabetically) +# - new (unread message count) +# - path (alphabetically) +# - unread (unread message count) +# - unsorted +# +# +# You may optionally use the ``reverse-'' prefix to specify reverse sorting +# order (example: ``set sort_browser=reverse-date''). +# +# +# set sidebar_use_mailbox_shortcuts=no +# +# Name: sidebar_use_mailbox_shortcuts +# Type: boolean +# Default: no +# +# +# When set, sidebar mailboxes will be displayed with mailbox shortcut prefixes +# "=" or "~". +# +# When unset, the sidebar will trim off a matching $folder prefix +# but otherwise not use mailbox shortcuts. +# +# +# set sidebar_visible=no +# +# Name: sidebar_visible +# Type: boolean +# Default: no +# +# +# This specifies whether or not to show sidebar. The sidebar shows a list of +# all your mailboxes. +# +# See also: $sidebar_format, $sidebar_width +# +# +# set sidebar_width=30 +# +# Name: sidebar_width +# Type: number +# Default: 30 +# +# +# This controls the width of the sidebar. It is measured in screen columns. +# For example: sidebar_width=20 could display 20 ASCII characters, or 10 +# Chinese characters. +# +# +# set sig_dashes=yes +# +# Name: sig_dashes +# Type: boolean +# Default: yes +# +# +# If set, a line containing ``-- '' (note the trailing space) will be inserted before your +# $signature. It is strongly recommended that you not unset +# this variable unless your signature contains just your name. The +# reason for this is because many software packages use ``-- \n'' to +# detect your signature. For example, Mutt has the ability to highlight +# the signature in a different color in the built-in pager. +# +# +# set sig_on_top=no +# +# Name: sig_on_top +# Type: boolean +# Default: no +# +# +# If set, the signature will be included before any quoted or forwarded +# text. It is strongly recommended that you do not set this variable +# unless you really know what you are doing, and are prepared to take +# some heat from netiquette guardians. +# +# +# set signature="~/.signature" +# +# Name: signature +# Type: path +# Default: "~/.signature" +# +# +# Specifies the filename of your signature, which is appended to all +# outgoing messages. If the filename ends with a pipe (``|''), it is +# assumed that filename is a shell command and input should be read from +# its standard output. +# +# +# set simple_search="~f %s | ~s %s" +# +# Name: simple_search +# Type: string +# Default: "~f %s | ~s %s" +# +# +# Specifies how Mutt should expand a simple search into a real search +# pattern. A simple search is one that does not contain any of the ``~'' pattern +# operators. See ``patterns'' for more information on search patterns. +# +# For example, if you simply type ``joe'' at a search or limit prompt, Mutt +# will automatically expand it to the value specified by this variable by +# replacing ``%s'' with the supplied string. +# For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''. +# +# +# set size_show_bytes=no +# +# Name: size_show_bytes +# Type: boolean +# Default: no +# +# +# If set, message sizes will display bytes for values less than +# 1 kilobyte. See formatstrings-size. +# +# +# set size_show_fractions=yes +# +# Name: size_show_fractions +# Type: boolean +# Default: yes +# +# +# If set, message sizes will be displayed with a single decimal value +# for sizes from 0 to 10 kilobytes and 1 to 10 megabytes. +# See formatstrings-size. +# +# +# set size_show_mb=yes +# +# Name: size_show_mb +# Type: boolean +# Default: yes +# +# +# If set, message sizes will display megabytes for values greater than +# or equal to 1 megabyte. See formatstrings-size. +# +# +# set size_units_on_left=no +# +# Name: size_units_on_left +# Type: boolean +# Default: no +# +# +# If set, message sizes units will be displayed to the left of the number. +# See formatstrings-size. +# +# +# set sleep_time=1 +# +# Name: sleep_time +# Type: number +# Default: 1 +# +# +# Specifies time, in seconds, to pause while displaying certain informational +# messages, while moving from folder to folder and after expunging +# messages from the current folder. The default is to pause one second, so +# a value of zero for this option suppresses the pause. +# +# +# set smart_wrap=yes +# +# Name: smart_wrap +# Type: boolean +# Default: yes +# +# +# Controls the display of lines longer than the screen width in the +# internal pager. If set, long lines are wrapped at a word boundary. If +# unset, lines are simply wrapped at the screen edge. Also see the +# $markers variable. +# +# +# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])" +# +# Name: smileys +# Type: regular expression +# Default: "(>From )|(:[-^]?[][)(><}{|/DP])" +# +# +# The pager uses this variable to catch some common false +# positives of $quote_regexp, most notably smileys and not consider +# a line quoted text if it also matches $smileys. This mostly +# happens at the beginning of a line. +# +# +# set smime_ask_cert_label=yes +# +# Name: smime_ask_cert_label +# Type: boolean +# Default: yes +# +# +# This flag controls whether you want to be asked to enter a label +# for a certificate about to be added to the database or not. It is +# set by default. +# (S/MIME only) +# +# +# set smime_ca_location="" +# +# Name: smime_ca_location +# Type: path +# Default: "" +# +# +# This variable contains the name of either a directory, or a file which +# contains trusted certificates for use with OpenSSL. +# (S/MIME only) +# +# +# set smime_certificates="" +# +# Name: smime_certificates +# Type: path +# Default: "" +# +# +# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle +# storage and retrieval of keys by itself. This is very basic right +# now, and keys and certificates are stored in two different +# directories, both named as the hash-value retrieved from +# OpenSSL. There is an index file which contains mailbox-address +# keyid pairs, and which can be manually edited. This option points to +# the location of the certificates. +# (S/MIME only) +# +# +# set smime_decrypt_command="" +# +# Name: smime_decrypt_command +# Type: string +# Default: "" +# +# +# This format string specifies a command which is used to decrypt +# application/x-pkcs7-mime attachments. +# +# The OpenSSL command formats have their own set of printf(3)-like sequences +# similar to PGP's: +# %f Expands to the name of a file containing a message. +# %s Expands to the name of a file containing the signature part +# of a multipart/signed attachment when verifying it. +# %k The key-pair specified with $smime_default_key +# %c One or more certificate IDs. +# %a The algorithm used for encryption. +# %d The message digest algorithm specified with $smime_sign_digest_alg. +# %C CA location: Depending on whether $smime_ca_location +# points to a directory or file, this expands to +# ``-CApath $smime_ca_location'' or ``-CAfile $smime_ca_location''. +# +# +# For examples on how to configure these formats, see the smime.rc in +# the share/examples/mutt subdirectory which has been installed on your system +# alongside the documentation. +# (S/MIME only) +# +# +# set smime_decrypt_use_default_key=yes +# +# Name: smime_decrypt_use_default_key +# Type: boolean +# Default: yes +# +# +# If set (default) this tells mutt to use the default key for decryption. Otherwise, +# if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address +# to determine the key to use. It will ask you to supply a key, if it can't find one. +# (S/MIME only) +# +# +# set smime_dont_check_sender=no +# +# Name: smime_dont_check_sender +# Type: boolean +# Default: no +# +# +# This flag controls wether you want the skip the check for the sender's +# email address against the email address stored in the certificate. +# This can be useful if most of your email senders use SMIMEv3 which no +# longer needs email-addresses as part of the certificates. +# It is not set by default. +# +# +# set smime_default_key="" +# +# Name: smime_default_key +# Type: string +# Default: "" +# +# +# This is the default key-pair to use for S/MIME operations, and must be +# set to the keyid (the hash-value that OpenSSL generates) to work properly. +# +# It will be used for encryption (see $postpone_encrypt and +# $smime_self_encrypt). +# +# It will be used for decryption unless $smime_decrypt_use_default_key +# is unset. +# +# It will also be used for signing unless $smime_sign_as is set. +# +# The (now deprecated) smime_self_encrypt_as is an alias for this +# variable, and should no longer be used. +# (S/MIME only) +# +# +# set smime_encrypt_command="" +# +# Name: smime_encrypt_command +# Type: string +# Default: "" +# +# +# This command is used to create encrypted S/MIME messages. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_encrypt_with="aes256" +# +# Name: smime_encrypt_with +# Type: string +# Default: "aes256" +# +# +# This sets the algorithm that should be used for encryption. +# Valid choices are ``aes128'', ``aes192'', ``aes256'', ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''. +# (S/MIME only) +# +# +# set smime_get_cert_command="" +# +# Name: smime_get_cert_command +# Type: string +# Default: "" +# +# +# This command is used to extract X509 certificates from a PKCS7 structure. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_get_cert_email_command="" +# +# Name: smime_get_cert_email_command +# Type: string +# Default: "" +# +# +# This command is used to extract the mail address(es) used for storing +# X509 certificates, and for verification purposes (to check whether the +# certificate was issued for the sender's mailbox). +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_get_signer_cert_command="" +# +# Name: smime_get_signer_cert_command +# Type: string +# Default: "" +# +# +# This command is used to extract only the signers X509 certificate from a S/MIME +# signature, so that the certificate's owner may get compared to the +# email's ``From:'' field. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_import_cert_command="" +# +# Name: smime_import_cert_command +# Type: string +# Default: "" +# +# +# This command is used to import a certificate via smime_keys. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_is_default=no +# +# Name: smime_is_default +# Type: boolean +# Default: no +# +# +# The default behavior of mutt is to use PGP on all auto-sign/encryption +# operations. To override and to use OpenSSL instead this must be set. +# However, this has no effect while replying, since mutt will automatically +# select the same application that was used to sign/encrypt the original +# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.) +# (S/MIME only) +# +# +# set smime_keys="" +# +# Name: smime_keys +# Type: path +# Default: "" +# +# +# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle +# storage and retrieval of keys/certs by itself. This is very basic right now, +# and stores keys and certificates in two different directories, both +# named as the hash-value retrieved from OpenSSL. There is an index file +# which contains mailbox-address keyid pair, and which can be manually +# edited. This option points to the location of the private keys. +# (S/MIME only) +# +# +# set smime_pk7out_command="" +# +# Name: smime_pk7out_command +# Type: string +# Default: "" +# +# +# This command is used to extract PKCS7 structures of S/MIME signatures, +# in order to extract the public X509 certificate(s). +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_self_encrypt=yes +# +# Name: smime_self_encrypt +# Type: boolean +# Default: yes +# +# +# When set, S/MIME encrypted messages will also be encrypted +# using the certificate in $smime_default_key. +# (S/MIME only) +# +# +# set smime_sign_as="" +# +# Name: smime_sign_as +# Type: string +# Default: "" +# +# +# If you have a separate key to use for signing, you should set this +# to the signing key. Most people will only need to set $smime_default_key. +# (S/MIME only) +# +# +# set smime_sign_command="" +# +# Name: smime_sign_command +# Type: string +# Default: "" +# +# +# This command is used to created S/MIME signatures of type +# multipart/signed, which can be read by all mail clients. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. NOTE: %c and %k will default +# to $smime_sign_as if set, otherwise $smime_default_key. +# (S/MIME only) +# +# +# set smime_sign_digest_alg="sha256" +# +# Name: smime_sign_digest_alg +# Type: string +# Default: "sha256" +# +# +# This sets the algorithm that should be used for the signature message digest. +# Valid choices are ``md5'', ``sha1'', ``sha224'', ``sha256'', ``sha384'', ``sha512''. +# (S/MIME only) +# +# +# set smime_sign_opaque_command="" +# +# Name: smime_sign_opaque_command +# Type: string +# Default: "" +# +# +# This command is used to created S/MIME signatures of type +# application/x-pkcs7-signature, which can only be handled by mail +# clients supporting the S/MIME extension. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_timeout=300 +# +# Name: smime_timeout +# Type: number (long) +# Default: 300 +# +# +# The number of seconds after which a cached passphrase will expire if +# not used. +# (S/MIME only) +# +# +# set smime_verify_command="" +# +# Name: smime_verify_command +# Type: string +# Default: "" +# +# +# This command is used to verify S/MIME signatures of type multipart/signed. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smime_verify_opaque_command="" +# +# Name: smime_verify_opaque_command +# Type: string +# Default: "" +# +# +# This command is used to verify S/MIME signatures of type +# application/x-pkcs7-mime. +# +# This is a format string, see the $smime_decrypt_command command for +# possible printf(3)-like sequences. +# (S/MIME only) +# +# +# set smtp_authenticators="" +# +# Name: smtp_authenticators +# Type: string +# Default: "" +# +# +# This is a colon-delimited list of authentication methods mutt may +# attempt to use to log in to an SMTP server, in the order mutt should +# try them. Authentication methods are any SASL mechanism, e.g. +# ``digest-md5'', ``gssapi'' or ``cram-md5''. +# This option is case-insensitive. If it is ``unset'' +# (the default) mutt will try all available methods, in order from +# most-secure to least-secure. +# +# Example: +# set smtp_authenticators="digest-md5:cram-md5" +# +# +# set smtp_oauth_refresh_command="" +# +# Name: smtp_oauth_refresh_command +# Type: string +# Default: "" +# +# +# The command to run to generate an OAUTH refresh token for +# authorizing your connection to your SMTP server. This command will be +# run on every connection attempt that uses the OAUTHBEARER authentication +# mechanism. See ``oauth'' for details. +# +# +# set smtp_pass="" +# +# Name: smtp_pass +# Type: string +# Default: "" +# +# +# Specifies the password for your SMTP account. If unset, Mutt will +# prompt you for your password when you first send mail via SMTP. +# See $smtp_url to configure mutt to send mail via SMTP. +# +# Warning: you should only use this option when you are on a +# fairly secure machine, because the superuser can read your muttrc even +# if you are the only one who can read the file. +# +# +# set smtp_url="" +# +# Name: smtp_url +# Type: string +# Default: "" +# +# +# Defines the SMTP smarthost where sent messages should relayed for +# delivery. This should take the form of an SMTP URL, e.g.: +# smtp[s]://[user[:pass]@]host[:port] +# +# where ``[...]'' denotes an optional part. +# Setting this variable overrides the value of the $sendmail +# variable. +# +# Also see $write_bcc. +# +# +set sort=reverse-date +# +# Name: sort +# Type: sort order +# Default: date +# +# +# Specifies how to sort messages in the ``index'' menu. Valid values +# are: +# - date or date-sent +# - date-received +# - from +# - mailbox-order (unsorted) +# - score +# - size +# - spam +# - subject +# - threads +# - to +# +# +# You may optionally use the ``reverse-'' prefix to specify reverse sorting +# order (example: ``set sort=reverse-date-sent''). +# +# +# set sort_alias=alias +# +# Name: sort_alias +# Type: sort order +# Default: alias +# +# +# Specifies how the entries in the ``alias'' menu are sorted. The +# following are legal values: +# - address (sort alphabetically by email address) +# - alias (sort alphabetically by alias name) +# - unsorted (leave in order specified in .muttrc) +# +# +# set sort_aux=date +# +# Name: sort_aux +# Type: sort order +# Default: date +# +# +# This provides a secondary sort for messages in the ``index'' menu, used +# when the $sort value is equal for two messages. +# +# When sorting by threads, this variable controls how threads are sorted +# in relation to other threads, and how the branches of the thread trees +# are sorted. This can be set to any value that $sort can, except +# ``threads'' (in that case, mutt will just use ``date-sent''). You can also +# specify the ``last-'' prefix in addition to the ``reverse-'' prefix, but ``last-'' +# must come after ``reverse-''. The ``last-'' prefix causes messages to be +# sorted against its siblings by which has the last descendant, using +# the rest of $sort_aux as an ordering. For instance, +# set sort_aux=last-date-received +# +# would mean that if a new message is received in a +# thread, that thread becomes the last one displayed (or the first, if +# you have ``set sort=reverse-threads''.) +# +# Note: For reversed-threads $sort +# order, $sort_aux is reversed again (which is not the right thing to do, +# but kept to not break any existing configuration setting). +# +# +# set sort_browser=alpha +# +# Name: sort_browser +# Type: sort order +# Default: alpha +# +# +# Specifies how to sort entries in the file browser. By default, the +# entries are sorted alphabetically. Valid values: +# - alpha (alphabetically) +# - count +# - date +# - size +# - unread +# - unsorted +# +# +# You may optionally use the ``reverse-'' prefix to specify reverse sorting +# order (example: ``set sort_browser=reverse-date''). +# +# +# set sort_re=yes +# +# Name: sort_re +# Type: boolean +# Default: yes +# +# +# This variable is only useful when sorting by threads with +# $strict_threads unset. In that case, it changes the heuristic +# mutt uses to thread messages by subject. With $sort_re set, mutt will +# only attach a message as the child of another message by subject if +# the subject of the child message starts with a substring matching the +# setting of $reply_regexp. With $sort_re unset, mutt will attach +# the message whether or not this is the case, as long as the +# non-$reply_regexp parts of both messages are identical. +# +# +# set spam_separator="," +# +# Name: spam_separator +# Type: string +# Default: "," +# +# +# This variable controls what happens when multiple spam headers +# are matched: if unset, each successive header will overwrite any +# previous matches value for the spam label. If set, each successive +# match will append to the previous, using this variable's value as a +# separator. +# +# +set spoolfile=+/ +# +# Name: spoolfile +# Type: path +# Default: "" +# +# +# If your spool mailbox is in a non-default place where Mutt cannot find +# it, you can specify its location with this variable. Mutt will +# initially set this variable to the value of the environment +# variable $MAIL or $MAILDIR if either is defined. +# +# +# set ssl_ca_certificates_file="" +# +# Name: ssl_ca_certificates_file +# Type: path +# Default: "" +# +# +# This variable specifies a file containing trusted CA certificates. +# Any server certificate that is signed with one of these CA +# certificates is also automatically accepted. (GnuTLS only) +# +# Example: +# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt +# +# +# set ssl_client_cert="" +# +# Name: ssl_client_cert +# Type: path +# Default: "" +# +# +# The file containing a client certificate and its associated private +# key. +# +# +# set ssl_force_tls=no +# +# Name: ssl_force_tls +# Type: boolean +# Default: no +# +# +# If this variable is set, Mutt will require that all connections +# to remote servers be encrypted. Furthermore it will attempt to +# negotiate TLS even if the server does not advertise the capability, +# since it would otherwise have to abort the connection anyway. This +# option supersedes $ssl_starttls. +# +# +# set ssl_min_dh_prime_bits=0 +# +# Name: ssl_min_dh_prime_bits +# Type: number +# Default: 0 +# +# +# This variable specifies the minimum acceptable prime size (in bits) +# for use in any Diffie-Hellman key exchange. A value of 0 will use +# the default from the GNUTLS library. (GnuTLS only) +# +# +# set ssl_starttls=yes +# +# Name: ssl_starttls +# Type: quadoption +# Default: yes +# +# +# If set (the default), mutt will attempt to use STARTTLS on servers +# advertising the capability. When unset, mutt will not attempt to +# use STARTTLS regardless of the server's capabilities. +# +# +# set ssl_use_sslv2=no +# +# Name: ssl_use_sslv2 +# Type: boolean +# Default: no +# +# +# If set , Mutt will use SSLv2 when communicating with servers that +# request it. N.B. As of 2011, SSLv2 is considered insecure, and using +# is inadvisable. See https://tools.ietf.org/html/rfc6176 . +# (OpenSSL only) +# +# +# set ssl_use_sslv3=no +# +# Name: ssl_use_sslv3 +# Type: boolean +# Default: no +# +# +# If set , Mutt will use SSLv3 when communicating with servers that +# request it. N.B. As of 2015, SSLv3 is considered insecure, and using +# it is inadvisable. See https://tools.ietf.org/html/rfc7525 . +# +# +# set ssl_use_tlsv1=no +# +# Name: ssl_use_tlsv1 +# Type: boolean +# Default: no +# +# +# If set , Mutt will use TLSv1.0 when communicating with servers that +# request it. N.B. As of 2015, TLSv1.0 is considered insecure, and using +# it is inadvisable. See https://tools.ietf.org/html/rfc7525 . +# +# +# set ssl_use_tlsv1_1=no +# +# Name: ssl_use_tlsv1_1 +# Type: boolean +# Default: no +# +# +# If set , Mutt will use TLSv1.1 when communicating with servers that +# request it. N.B. As of 2015, TLSv1.1 is considered insecure, and using +# it is inadvisable. See https://tools.ietf.org/html/rfc7525 . +# +# +# set ssl_use_tlsv1_2=yes +# +# Name: ssl_use_tlsv1_2 +# Type: boolean +# Default: yes +# +# +# If set , Mutt will use TLSv1.2 when communicating with servers that +# request it. +# +# +# set ssl_use_tlsv1_3=yes +# +# Name: ssl_use_tlsv1_3 +# Type: boolean +# Default: yes +# +# +# If set , Mutt will use TLSv1.3 when communicating with servers that +# request it. +# +# +# set ssl_usesystemcerts=yes +# +# Name: ssl_usesystemcerts +# Type: boolean +# Default: yes +# +# +# If set to yes, mutt will use CA certificates in the +# system-wide certificate store when checking if a server certificate +# is signed by a trusted CA. (OpenSSL only) +# +# +# set ssl_verify_dates=yes +# +# Name: ssl_verify_dates +# Type: boolean +# Default: yes +# +# +# If set (the default), mutt will not automatically accept a server +# certificate that is either not yet valid or already expired. You should +# only unset this for particular known hosts, using the +# <account-hook> function. +# +# +# set ssl_verify_host=yes +# +# Name: ssl_verify_host +# Type: boolean +# Default: yes +# +# +# If set (the default), mutt will not automatically accept a server +# certificate whose host name does not match the host used in your folder +# URL. You should only unset this for particular known hosts, using +# the <account-hook> function. +# +# +# set ssl_verify_partial_chains=no +# +# Name: ssl_verify_partial_chains +# Type: boolean +# Default: no +# +# +# This option should not be changed from the default unless you understand +# what you are doing. +# +# Setting this variable to yes will permit verifying partial +# certification chains, i. e. a certificate chain where not the root, +# but an intermediate certificate CA, or the host certificate, are +# marked trusted (in $certificate_file), without marking the root +# signing CA as trusted. +# +# (OpenSSL 1.0.2b and newer only). +# +# +# set ssl_ciphers="" +# +# Name: ssl_ciphers +# Type: string +# Default: "" +# +# +# Contains a colon-seperated list of ciphers to use when using SSL. +# For OpenSSL, see ciphers(1) for the syntax of the string. +# +# For GnuTLS, this option will be used in place of "NORMAL" at the +# start of the priority string. See gnutls_priority_init(3) for the +# syntax and more details. (Note: GnuTLS version 2.1.7 or higher is +# required.) +# +# +# set status_chars="-*%A" +# +# Name: status_chars +# Type: string +# Default: "-*%A" +# +# +# Controls the characters used by the ``%r'' indicator in +# $status_format. The first character is used when the mailbox is +# unchanged. The second is used when the mailbox has been changed, and +# it needs to be resynchronized. The third is used if the mailbox is in +# read-only mode, or if the mailbox will not be written when exiting +# that mailbox (You can toggle whether to write changes to a mailbox +# with the <toggle-write> operation, bound by default to ``%''). The fourth +# is used to indicate that the current folder has been opened in attach- +# message mode (Certain operations like composing a new mail, replying, +# forwarding, etc. are not permitted in this mode). +# +# +# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?B? Back:%B?%?l? %l?]---(%s/%S)-%>-(%P)---" +# +# Name: status_format +# Type: string +# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?B? Back:%B?%?l? %l?]---(%s/%S)-%>-(%P)---" +# +# +# Controls the format of the status line displayed in the ``index'' +# menu. This string is similar to $index_format, but has its own +# set of printf(3)-like sequences: +# %b number of mailboxes with new mail * +# %B number of backgrounded editing sessions * +# %d number of deleted messages * +# %f the full pathname of the current mailbox +# %F number of flagged messages * +# %h local hostname +# %l size (in bytes) of the current mailbox (see formatstrings-size) * +# %L size (in bytes) of the messages shown +# (i.e., which match the current limit) (see formatstrings-size) * +# %m the number of messages in the mailbox * +# %M the number of messages shown (i.e., which match the current limit) * +# %n number of new messages in the mailbox * +# %o number of old unread messages * +# %p number of postponed messages * +# %P percentage of the way through the index +# %r modified/read-only/won't-write/attach-message indicator, +# according to $status_chars +# %R number of read messages * +# %s current sorting mode ($sort) +# %S current aux sorting method ($sort_aux) +# %t number of tagged messages * +# %u number of unread messages * +# %v Mutt version string +# %V currently active limit pattern, if any * +# %>X right justify the rest of the string and pad with ``X'' +# %|X pad to the end of the line with ``X'' +# %*X soft-fill with character ``X'' as pad +# +# +# For an explanation of ``soft-fill'', see the $index_format documentation. +# +# * = can be optionally printed if nonzero +# +# Some of the above sequences can be used to optionally print a string +# if their value is nonzero. For example, you may only want to see the +# number of flagged messages if such messages exist, since zero is not +# particularly meaningful. To optionally print a string based upon one +# of the above sequences, the following construct is used: +# +# %?<sequence_char>?<optional_string>? +# +# where sequence_char is a character from the table above, and +# optional_string is the string you would like printed if +# sequence_char is nonzero. optional_string may contain +# other sequences as well as normal text, but you may not nest +# optional strings. +# +# Here is an example illustrating how to optionally print the number of +# new messages in a mailbox: +# +# %?n?%n new messages.? +# +# You can also switch between two strings using the following construct: +# +# %?<sequence_char>?<if_string>&<else_string>? +# +# If the value of sequence_char is non-zero, if_string will +# be expanded, otherwise else_string will be expanded. +# +# You can force the result of any printf(3)-like sequence to be lowercase +# by prefixing the sequence character with an underscore (``_'') sign. +# For example, if you want to display the local hostname in lowercase, +# you would use: ``%_h''. +# +# If you prefix the sequence character with a colon (``:'') character, mutt +# will replace any dots in the expansion by underscores. This might be helpful +# with IMAP folders that don't like dots in folder names. +# +# +# set status_on_top=no +# +# Name: status_on_top +# Type: boolean +# Default: no +# +# +# Setting this variable causes the ``status bar'' to be displayed on +# the first line of the screen rather than near the bottom. If $help +# is set, too it'll be placed at the bottom. +# +# +# set strict_threads=no +# +# Name: strict_threads +# Type: boolean +# Default: no +# +# +# If set, threading will only make use of the ``In-Reply-To'' and +# ``References:'' fields when you $sort by message threads. By +# default, messages with the same subject are grouped together in +# ``pseudo threads.''. This may not always be desirable, such as in a +# personal mailbox where you might have several unrelated messages with +# the subjects like ``hi'' which will get grouped together. See also +# $sort_re for a less drastic way of controlling this +# behavior. +# +# +# set suspend=yes +# +# Name: suspend +# Type: boolean +# Default: yes +# +# +# When unset, mutt won't stop when the user presses the terminal's +# susp key, usually ``^Z''. This is useful if you run mutt +# inside an xterm using a command like ``xterm -e mutt''. +# +# +# set text_flowed=no +# +# Name: text_flowed +# Type: boolean +# Default: no +# +# +# When set, mutt will generate ``format=flowed'' bodies with a content type +# of ``text/plain; format=flowed''. +# This format is easier to handle for some mailing software, and generally +# just looks like ordinary text. To actually make use of this format's +# features, you'll need support in your editor. +# +# The option only controls newly composed messages. Postponed messages, +# resent messages, and draft messages (via -H on the command line) will +# use the content-type of the source message. +# +# Note that $indent_string is ignored when this option is set. +# +# +# set thorough_search=yes +# +# Name: thorough_search +# Type: boolean +# Default: yes +# +# +# Affects the ~b and ~h search operations described in +# section ``patterns''. If set, the headers and body/attachments of +# messages to be searched are decoded before searching. If unset, +# messages are searched as they appear in the folder. +# +# Users searching attachments or for non-ASCII characters should set +# this value because decoding also includes MIME parsing/decoding and possible +# character set conversions. Otherwise mutt will attempt to match against the +# raw message received (for example quoted-printable encoded or with encoded +# headers) which may lead to incorrect search results. +# +# +# set thread_received=no +# +# Name: thread_received +# Type: boolean +# Default: no +# +# +# When set, mutt uses the date received rather than the date sent +# to thread messages by subject. +# +# +# set tilde=no +# +# Name: tilde +# Type: boolean +# Default: no +# +# +# When set, the internal-pager will pad blank lines to the bottom of the +# screen with a tilde (``~''). +# +# +# set time_inc=0 +# +# Name: time_inc +# Type: number +# Default: 0 +# +# +# Along with $read_inc, $write_inc, and $net_inc, this +# variable controls the frequency with which progress updates are +# displayed. It suppresses updates less than $time_inc milliseconds +# apart. This can improve throughput on systems with slow terminals, +# or when running mutt on a remote system. +# +# Also see the ``tuning'' section of the manual for performance considerations. +# +# +# set timeout=600 +# +# Name: timeout +# Type: number +# Default: 600 +# +# +# When Mutt is waiting for user input either idling in menus or +# in an interactive prompt, Mutt would block until input is +# present. Depending on the context, this would prevent certain +# operations from working, like checking for new mail or keeping +# an IMAP connection alive. +# +# This variable controls how many seconds Mutt will at most wait +# until it aborts waiting for input, performs these operations and +# continues to wait for input. +# +# A value of zero or less will cause Mutt to never time out. +# +# +# set tmpdir="" +# +# Name: tmpdir +# Type: path +# Default: "" +# +# +# This variable allows you to specify where Mutt will place its +# temporary files needed for displaying and composing messages. If +# this variable is not set, the environment variable $TMPDIR is +# used. If $TMPDIR is not set then ``/tmp'' is used. +# +# +# set to_chars=" +TCFL" +# +# Name: to_chars +# Type: string +# Default: " +TCFL" +# +# +# Controls the character used to indicate mail addressed to you. The +# first character is the one used when the mail is not addressed to your +# address. The second is used when you are the only +# recipient of the message. The third is when your address +# appears in the ``To:'' header field, but you are not the only recipient of +# the message. The fourth character is used when your +# address is specified in the ``Cc:'' header field, but you are not the only +# recipient. The fifth character is used to indicate mail that was sent +# by you. The sixth character is used to indicate when a mail +# was sent to a mailing-list you subscribe to. +# +# +# set trash="" +# +# Name: trash +# Type: path +# Default: "" +# +# +# If set, this variable specifies the path of the trash folder where the +# mails marked for deletion will be moved, instead of being irremediably +# purged. +# +# NOTE: When you delete a message in the trash folder, it is really +# deleted, so that you have a way to clean the trash. +# +# +# set ts_icon_format="M%?n?AIL&ail?" +# +# Name: ts_icon_format +# Type: string +# Default: "M%?n?AIL&ail?" +# +# +# Controls the format of the icon title, as long as ``$ts_enabled'' is set. +# This string is identical in formatting to the one used by +# ``$status_format''. +# +# +# set ts_enabled=no +# +# Name: ts_enabled +# Type: boolean +# Default: no +# +# +# Controls whether mutt tries to set the terminal status line and icon name. +# Most terminal emulators emulate the status line in the window title. +# +# +# set ts_status_format="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" +# +# Name: ts_status_format +# Type: string +# Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" +# +# +# Controls the format of the terminal status line (or window title), +# provided that ``$ts_enabled'' has been set. This string is identical in +# formatting to the one used by ``$status_format''. +# +# +# set tunnel="" +# +# Name: tunnel +# Type: string +# Default: "" +# +# +# Setting this variable will cause mutt to open a pipe to a command +# instead of a raw socket. You may be able to use this to set up +# preauthenticated connections to your IMAP/POP3/SMTP server. Example: +# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" +# +# Note: For this example to work you must be able to log in to the remote +# machine without having to enter a password. +# +# When set, Mutt uses the tunnel for all remote connections. +# Please see ``account-hook'' in the manual for how to use different +# tunnel commands per connection. +# +# +# set uncollapse_jump=no +# +# Name: uncollapse_jump +# Type: boolean +# Default: no +# +# +# When set, Mutt will jump to the next unread message, if any, +# when the current thread is uncollapsed. +# +# +# set uncollapse_new=yes +# +# Name: uncollapse_new +# Type: boolean +# Default: yes +# +# +# When set, Mutt will automatically uncollapse any collapsed thread +# that receives a new message. When unset, collapsed threads will +# remain collapsed. the presence of the new message will still affect +# index sorting, though. +# +# +# set use_8bitmime=no +# +# Name: use_8bitmime +# Type: boolean +# Default: no +# +# +# Warning: do not set this variable unless you are using a version +# of sendmail which supports the -B8BITMIME flag (such as sendmail +# 8.8.x) or you may not be able to send mail. +# +# When set, Mutt will invoke $sendmail with the -B8BITMIME +# flag when sending 8-bit messages to enable ESMTP negotiation. +# +# +# set use_domain=yes +# +# Name: use_domain +# Type: boolean +# Default: yes +# +# +# When set, Mutt will qualify all local addresses (ones without the +# ``@host'' portion) with the value of $hostname. If unset, no +# addresses will be qualified. +# +# +# set use_envelope_from=no +# +# Name: use_envelope_from +# Type: boolean +# Default: no +# +# +# When set, mutt will set the envelope sender of the message. +# If $envelope_from_address is set, it will be used as the sender +# address. If unset, mutt will attempt to derive the sender from the +# ``From:'' header. +# +# Note that this information is passed to sendmail command using the +# -f command line switch. Therefore setting this option is not useful +# if the $sendmail variable already contains -f or if the +# executable pointed to by $sendmail doesn't support the -f switch. +# +# +# set use_from=yes +# +# Name: use_from +# Type: boolean +# Default: yes +# +# +# When set, Mutt will generate the ``From:'' header field when +# sending messages. If unset, no ``From:'' header field will be +# generated unless the user explicitly sets one using the ``my_hdr'' +# command. +# +# +# set use_ipv6=yes +# +# Name: use_ipv6 +# Type: boolean +# Default: yes +# +# +# When set, Mutt will look for IPv6 addresses of hosts it tries to +# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. +# Normally, the default should work. +# +# +# set user_agent=no +# +# Name: user_agent +# Type: boolean +# Default: no +# +# +# When set, mutt will add a ``User-Agent:'' header to outgoing +# messages, indicating which version of mutt was used for composing +# them. +# +# +# set visual="" +# +# Name: visual +# Type: path +# Default: "" +# +# +# Specifies the visual editor to invoke when the ``~v'' command is +# given in the built-in editor. +# +# +# set wait_key=yes +# +# Name: wait_key +# Type: boolean +# Default: yes +# +# +# Controls whether Mutt will ask you to press a key after an external command +# has been invoked by these functions: <shell-escape>, +# <pipe-message>, <pipe-entry>, <print-message>, +# and <print-entry> commands. +# +# It is also used when viewing attachments with ``auto_view'', provided +# that the corresponding mailcap entry has a needsterminal flag, +# and the external program is interactive. +# +# When set, Mutt will always ask for a key. When unset, Mutt will wait +# for a key only if the external command returned a non-zero status. +# +# +# set weed=yes +# +# Name: weed +# Type: boolean +# Default: yes +# +# +# When set, mutt will weed headers when displaying, forwarding, +# printing, or replying to messages. +# +# +# set wrap=0 +# +# Name: wrap +# Type: number +# Default: 0 +# +# +# When set to a positive value, mutt will wrap text at $wrap characters. +# When set to a negative value, mutt will wrap text so that there are $wrap +# characters of empty space on the right side of the terminal. Setting it +# to zero makes mutt wrap at the terminal width. +# +# Also see $reflow_wrap. +# +# +# set wrap_headers=78 +# +# Name: wrap_headers +# Type: number +# Default: 78 +# +# +# This option specifies the number of characters to use for wrapping +# an outgoing message's headers. Allowed values are between 78 and 998 +# inclusive. +# +# Note: This option usually shouldn't be changed. RFC5233 +# recommends a line length of 78 (the default), so please only change +# this setting when you know what you're doing. +# +# +# set wrap_search=yes +# +# Name: wrap_search +# Type: boolean +# Default: yes +# +# +# Controls whether searches wrap around the end. +# +# When set, searches will wrap around the first (or last) item. When +# unset, incremental searches will not wrap. +# +# +# set wrapmargin=0 +# +# Name: wrapmargin +# Type: number +# Default: 0 +# +# +# (DEPRECATED) Equivalent to setting $wrap with a negative value. +# +# +# set write_bcc=no +# +# Name: write_bcc +# Type: boolean +# Default: no +# +# +# Controls whether mutt writes out the ``Bcc:'' header when +# preparing messages to be sent. Some MTAs, such as Exim and +# Courier, do not strip the ``Bcc:'' header; so it is advisable to +# leave this unset unless you have a particular need for the header +# to be in the sent message. +# +# If mutt is set to deliver directly via SMTP (see $smtp_url), +# this option does nothing: mutt will never write out the ``Bcc:'' +# header in this case. +# +# Note this option only affects the sending of messages. Fcc'ed +# copies of a message will always contain the ``Bcc:'' header if +# one exists. +# +# +# set write_inc=10 +# +# Name: write_inc +# Type: number +# Default: 10 +# +# +# When writing a mailbox, a message will be printed every +# $write_inc messages to indicate progress. If set to 0, only a +# single message will be displayed before writing a mailbox. +# +# Also see the $read_inc, $net_inc and $time_inc variables and the +# ``tuning'' section of the manual for performance considerations. +# +# |