fix: drm graphics broken on first gen intel; switch to x11 for mpv

1 files changed, 1 insertions, 141 deletions

diff --git a/.config/mpv/mpv.conf b/.config/mpv/mpv.conf
index 7fa68df..cb5403d 100644
--- a/.config/mpv/mpv.conf
+++ b/.config/mpv/mpv.conf
@@ -1,141 +1 @@
-#
-# Example mpv configuration file
-#
-# Warning:
-#
-# The commented example options usually do _not_ set the default values. Call
-# mpv with --list-options to see the default values for most options. There is
-# no builtin or example mpv.conf with all the defaults.
-#
-#
-# Configuration files are read system-wide from /usr/local/etc/mpv.conf
-# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
-# system-wide settings, all of which are overridden by the command line.
-#
-# Configuration file settings and the command line options use the same
-# underlying mechanisms. Most options can be put into the configuration file
-# by dropping the preceding '--'. See the man page for a complete list of
-# options.
-#
-# Lines starting with '#' are comments and are ignored.
-#
-# See the CONFIGURATION FILES section in the man page
-# for a detailed description of the syntax.
-#
-# Profiles should be placed at the bottom of the configuration file to ensure
-# that settings wanted as defaults are not restricted to specific profiles.
-
-## ATC
-#ytdl-format=bestvideo[height<=?1080]+bestaudio/best
-
-##################
-# video settings #
-##################
-
-# Start in fullscreen mode by default.
-#fs=yes
-
-# force starting with centered window
-#geometry=50%:50%
-
-# don't allow a new window to have a size larger than 90% of the screen size
-#autofit-larger=90%x90%
-
-# Do not close the window on exit.
-#keep-open=yes
-
-# Do not wait with showing the video window until it has loaded. (This will
-# resize the window once video is loaded. Also always shows a window with
-# audio.)
-#force-window=immediate
-
-# Disable the On Screen Controller (OSC).
-#osc=no
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-
-# Specify high quality video rendering preset (for --vo=gpu only)
-# Can cause performance problems with some drivers and GPUs.
-#profile=gpu-hq
-
-# Force video to lock on the display's refresh rate, and change video and audio
-# speed to some degree to ensure synchronous playback - can cause problems
-# with some drivers and desktop environments.
-video-sync=display-resample
-
-# Enable hardware decoding if available. Often, this does not work with all
-# video outputs, but should work well with default settings on most systems.
-# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
-# may or may not help.
-#hwdec=auto
-
-##################
-# audio settings #
-##################
-
-# Specify default audio device. You can list devices with: --audio-device=help
-# The option takes the device string (the stuff between the '...').
-#audio-device=alsa/default
-
-# Do not filter audio to keep pitch when changing playback speed.
-#audio-pitch-correction=no
-
-# Output 5.1 audio natively, and upmix/downmix audio with a different format.
-#audio-channels=5.1
-# Disable any automatic remix, _if_ the audio output accepts the audio format.
-# of the currently played file. See caveats mentioned in the manpage.
-# (The default is "auto-safe", see manpage.)
-#audio-channels=auto
-
-##################
-# other settings #
-##################
-
-# Pretend to be a web browser. Might fix playback with some streaming sites,
-# but also will break with shoutcast streams.
-#user-agent="Mozilla/5.0"
-
-# cache settings
-#
-# Use a large seekable RAM cache even for local input.
-#cache=yes
-#
-# Use extra large RAM cache (needs cache=yes to make it useful).
-#demuxer-max-bytes=500M
-#demuxer-max-back-bytes=100M
-#
-# Disable the behavior that the player will pause if the cache goes below a
-# certain fill size.
-#cache-pause=no
-#
-# Store cache payload on the hard disk instead of in RAM. (This may negatively
-# impact performance unless used for slow input such as network.)
-#cache-dir=~/.cache/
-#cache-on-disk=yes
-
-# Display English subtitles if available.
-#slang=en
-
-# Play Finnish audio if available, fall back to English otherwise.
-#alang=fi,en
-
-# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
-# If the file seems to be valid UTF-8, prefer UTF-8.
-# (You can add '+' in front of the codepage to force it.)
-#sub-codepage=cp1256
-
-# You can also include other configuration files.
-#include=/path/to/the/file/you/want/to/include
-
-############
-# Profiles #
-############
-
-# The options declared as part of profiles override global default settings,
-# but only take effect when the profile is active.
-
-# The following profile can be enabled on the command line with: --profile=eye-cancer
-
-#[eye-cancer]
-#sharpen=5
+vo=xv